From: Balakrishna Godavarthi <bgodavar@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
linux-bluetooth@vger.kernel.org, hemantg@codeaurora.org,
linux-arm-msm@vger.kernel.org,
Balakrishna Godavarthi <bgodavar@codeaurora.org>
Subject: [PATCH v1 2/2] Bluetooth: hci_qca: Remove hdev dereference in qca_close().
Date: Wed, 22 Aug 2018 17:50:05 +0530 [thread overview]
Message-ID: <20180822122005.11218-3-bgodavar@codeaurora.org> (raw)
In-Reply-To: <20180822122005.11218-1-bgodavar@codeaurora.org>
When flag KASAN is set, we are seeing an following crash while removing
hci_uart module.
[ 50.589909] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b73
[ 50.597902] Mem abort info:
[ 50.600846] Exception class = DABT (current EL), IL = 32 bits
[ 50.606959] SET = 0, FnV = 0
[ 50.610142] EA = 0, S1PTW = 0
[ 50.613396] Data abort info:
[ 50.616401] ISV = 0, ISS = 0x00000004
[ 50.620373] CM = 0, WnR = 0
[ 50.623466] [006b6b6b6b6b6b73] address between user and kernel address ranges
[ 50.630818] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 50.671670] PC is at qca_power_shutdown+0x28/0x100 [hci_uart]
[ 50.677593] LR is at qca_close+0x74/0xb0 [hci_uart]
[ 50.775689] Process rmmod (pid: 2144, stack limit = 0xffffff801ba90000)
[ 50.782493] Call trace:
[ 50.872150] [<ffffff8000c3c81c>] qca_power_shutdown+0x28/0x100 [hci_uart]
[ 50.879138] [<ffffff8000c3c968>] qca_close+0x74/0xb0 [hci_uart]
[ 50.885238] [<ffffff8000c3a71c>] hci_uart_unregister_device+0x44/0x50 [hci_uart]
[ 50.892846] [<ffffff8000c3c9f4>] qca_serdev_remove+0x50/0x5c [hci_uart]
[ 50.899654] [<ffffff800844f630>] serdev_drv_remove+0x28/0x38
[ 50.905489] [<ffffff800850fc44>] device_release_driver_internal+0x140/0x1e4
[ 50.912653] [<ffffff800850fd94>] driver_detach+0x78/0x84
[ 50.918121] [<ffffff800850edac>] bus_remove_driver+0x80/0xa8
[ 50.923942] [<ffffff80085107dc>] driver_unregister+0x4c/0x58
[ 50.929768] [<ffffff8000c3ca8c>] qca_deinit+0x24/0x598 [hci_uart]
[ 50.936045] [<ffffff8000c3ca10>] hci_uart_exit+0x10/0x48 [hci_uart]
[ 50.942495] [<ffffff8008136630>] SyS_delete_module+0x17c/0x224
This crash is due to dereference of hdev, after freeing it.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
drivers/bluetooth/hci_qca.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index a740d5703914..74f5fede0274 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -167,7 +167,7 @@ struct qca_serdev {
};
static int qca_power_setup(struct hci_uart *hu, bool on);
-static void qca_power_shutdown(struct hci_dev *hdev);
+static void qca_power_shutdown(struct hci_uart *hu);
static void __serial_clock_on(struct tty_struct *tty)
{
@@ -608,7 +608,7 @@ static int qca_close(struct hci_uart *hu)
if (hu->serdev) {
qcadev = serdev_device_get_drvdata(hu->serdev);
if (qcadev->btsoc_type == QCA_WCN3990)
- qca_power_shutdown(hu->hdev);
+ qca_power_shutdown(hu);
else
gpiod_set_value_cansleep(qcadev->bt_en, 0);
@@ -1230,12 +1230,15 @@ static const struct qca_vreg_data qca_soc_data = {
.num_vregs = 4,
};
-static void qca_power_shutdown(struct hci_dev *hdev)
+static void qca_power_shutdown(struct hci_uart *hu)
{
- struct hci_uart *hu = hci_get_drvdata(hdev);
+ struct serdev_device *serdev = hu->serdev;
+ unsigned char cmd = QCA_WCN3990_POWEROFF_PULSE;
host_set_baudrate(hu, 2400);
- qca_send_power_pulse(hdev, QCA_WCN3990_POWEROFF_PULSE);
+ hci_uart_set_flow_control(hu, true);
+ serdev_device_write_buf(serdev, &cmd, sizeof(cmd));
+ hci_uart_set_flow_control(hu, false);
qca_power_setup(hu, false);
}
@@ -1411,7 +1414,7 @@ static void qca_serdev_remove(struct serdev_device *serdev)
struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
if (qcadev->btsoc_type == QCA_WCN3990)
- qca_power_shutdown(qcadev->serdev_hu.hdev);
+ qca_power_shutdown(&qcadev->serdev_hu);
else
clk_disable_unprepare(qcadev->susclk);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2018-08-22 12:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-22 12:20 [PATCH v1 0/2] Bug fixes for qualcomm BT chip wcn3990 Balakrishna Godavarthi
2018-08-22 12:20 ` [PATCH v1 1/2] Bluetooth: hci_qca: Remove serdev_device_open/close function calls Balakrishna Godavarthi
2018-08-22 12:20 ` Balakrishna Godavarthi [this message]
2018-08-24 18:32 ` [PATCH v1 0/2] Bug fixes for qualcomm BT chip wcn3990 Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180822122005.11218-3-bgodavar@codeaurora.org \
--to=bgodavar@codeaurora.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mka@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.