From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH] package/brltty: fix cross-compilation
Date: Wed, 22 Aug 2018 22:05:12 +0200 [thread overview]
Message-ID: <20180822200512.GF2404@scaer> (raw)
In-Reply-To: <20180822100415.dl7h3xvaahwtngut@sapphire.tkos.co.il>
Bruch, All,
On 2018-08-22 13:04 +0300, Baruch Siach spake thusly:
> On Wed, Aug 22, 2018 at 10:28:32AM +0200, Yann E. MORIN wrote:
> > brltty has a very inventive buildsystem, where it internall runs
> > ./configure for the build machine In doing so, it generates a list
> > of make variables to define what the build machine supports, like
> > it does for the target.
> >
> > However, the build variables are generated with a convoluted sed
> > script that scans the target list, and appends _FOR_BUILD to each
> > target variables. Then, both lists are included from the Makefile,
> > on the assumption that the build variables will not clash with the
> > target variables.
> >
> > Where it gets interesting, is that that sed script considers the
> > variables names to match '[A-Za-z][A-Za-z0-9_]*'
> >
> > And there we see why ATSPI2_PACKAGE does not match: it contains a
> > digit.
> >
> > So, some build variables will inevitably override target ones.
> >
> > Fix that by simply expanding the matching regexp to allow digits
> > in variable names.
>
> Thanks for fixing that.
>
> Do you have any idea why it only fails on specific (older?) hosts? Does it
> depend on the sed version?
I don;t know what the difference is. The sed version is probably not the
culprit, because the generated file is the same on a working or on a
failing system.
So, I believe I fixed the real problem, but I dont know why it sometimes
did not manifest itself on some systems, while it was visible on
others...
Regards,
Yann E. MORIN.
> baruch
>
> > Fixes:
> > http://autobuild.buildroot.org/results/a37/a37782b3cfc1a96cc129db8fade20a36a7b2d470/
> > http://autobuild.buildroot.org/results/97e/97edc6a47d2140968e84b409cdc960604e5896f2/
> >
> > Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
> > Cc: Mario Lang <mlang@blind.guru>
> > Cc: Baruch Siach <baruch@tkos.co.il>
> > ---
> > .../0004-buildsys-fix-cross-compilation.patch | 41 ++++++++++++++++++++++
> > 1 file changed, 41 insertions(+)
> > create mode 100644 package/brltty/0004-buildsys-fix-cross-compilation.patch
> >
> > diff --git a/package/brltty/0004-buildsys-fix-cross-compilation.patch b/package/brltty/0004-buildsys-fix-cross-compilation.patch
> > new file mode 100644
> > index 0000000000..9a10d46414
> > --- /dev/null
> > +++ b/package/brltty/0004-buildsys-fix-cross-compilation.patch
> > @@ -0,0 +1,41 @@
> > +From 088666535a045dae71bd2fcc6b3a1553023106ce Mon Sep 17 00:00:00 2001
> > +From: "Yann E. MORIN" <yann.morin.1998@free.fr>
> > +Date: Wed, 22 Aug 2018 10:10:19 +0200
> > +Subject: [PATCH] buildsys: fix cross-compilation
> > +
> > +Some identifiers for includes and libs paths may contain digit, e.g.
> > +X11_PACKAGE or ATSPI2_PACKAGE or GLIB2_PACKAGE...
> > +
> > +Also detect those identifiers when doing cros-compilation, so that the
> > +_FOR_BUILD variants are really created and do not clash with the target
> > +variants.
> > +
> > +Fixes:
> > + http://autobuild.buildroot.org/results/a37/a37782b3cfc1a96cc129db8fade20a36a7b2d470/build-end.log
> > + http://autobuild.buildroot.org/results/97e/97edc6a47d2140968e84b409cdc960604e5896f2/build-end.log
> > + [...]
> > +
> > +Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
> > +---
> > +Upstram status: submitted
> > +https://github.com/brltty/brltty/pull/142
> > +---
> > + mk4build | 2 +-
> > + 1 file changed, 1 insertion(+), 1 deletion(-)
> > +
> > +diff --git a/mk4build b/mk4build
> > +index db90c86a9..551283825 100755
> > +--- a/mk4build
> > ++++ b/mk4build
> > +@@ -112,7 +112,7 @@ fi
> > +
> > + sedScript="${outputName}.${sedExtension}"
> > + sed -n -e '
> > +-s/^ *\([A-Za-z][A-Za-z_]*\) *=.*$/\1/
> > ++s/^ *\([A-Za-z][A-Za-z0-9_]*\) *=.*$/\1/
> > + t found
> > + d
> > + :found
>
> --
> http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
> =}------------------------------------------------ooO--U--Ooo------------{=
> - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
next prev parent reply other threads:[~2018-08-22 20:05 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-22 8:28 [Buildroot] [PATCH] package/brltty: fix cross-compilation Yann E. MORIN
2018-08-22 10:04 ` Baruch Siach
2018-08-22 20:05 ` Yann E. MORIN [this message]
2018-08-22 10:12 ` Mario Lang
2018-08-22 15:34 ` Yann E. MORIN
2018-08-22 18:01 ` Peter Seiderer
2018-08-22 20:02 ` Yann E. MORIN
2018-08-25 12:40 ` Thomas Petazzoni
2018-08-26 21:23 ` Peter Korsgaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180822200512.GF2404@scaer \
--to=yann.morin.1998@free.fr \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.