Re: [PATCH] iio: adc: qcom-spmi-adc5: Add ADC5_AMUX_THM[24]_100K_PU to rev2 channel list

[Matthias Kaehlcke <mka@chromium.org>]

On Sun, Aug 19, 2018 at 05:54:52PM +0100, Jonathan Cameron wrote:
> On Fri, 10 Aug 2018 12:47:02 -0700
> Matthias Kaehlcke <mka@chromium.org> wrote:
> 
> > Add ADC5_AMUX_THM2_100K_PU and ADC5_AMUX_THM4_100K_PU to the list of
> > rev2 ADC channels.
> > 
> > Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> This is fine and applied to the togreg branch of iio.git.
> Pushed out as testing to let the autobuilders play with it.

Thanks!

> However, I took a quick look and can't immediately see what prevents us
> specifying channels in DT that don't have these definitions in the driver.

Indeed, the DT could just specify an arbitrary value.

> Should we have a check for that as at least superficially it seems like
> a bad idea!

It seems there isn't a single contiguous range, but a very superficial
check could at least verify that the value isn't larger than CHAN_MAX
or check a few sub-ranges.

> > ---
> >  drivers/iio/adc/qcom-spmi-adc5.c | 4 ++++
> >  1 file changed, 4 insertions(+)
> > 
> > diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
> > index a4299417f3de..1f9298a5c83d 100644
> > --- a/drivers/iio/adc/qcom-spmi-adc5.c
> > +++ b/drivers/iio/adc/qcom-spmi-adc5.c
> > @@ -491,8 +491,12 @@ static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = {
> >  					SCALE_HW_CALIB_PMIC_THERM)
> >  	[ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 1,
> >  					SCALE_HW_CALIB_THERM_100K_PULLUP)
> > +	[ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 1,
> > +					SCALE_HW_CALIB_THERM_100K_PULLUP)
> >  	[ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 1,
> >  					SCALE_HW_CALIB_THERM_100K_PULLUP)
> > +	[ADC5_AMUX_THM4_100K_PU] = ADC5_CHAN_TEMP("amux_thm4_100k_pu", 1,
> > +					SCALE_HW_CALIB_THERM_100K_PULLUP)
> >  	[ADC5_AMUX_THM5_100K_PU] = ADC5_CHAN_TEMP("amux_thm5_100k_pu", 1,
> >  					SCALE_HW_CALIB_THERM_100K_PULLUP)
> >  	[ADC5_XO_THERM_100K_PU]	= ADC5_CHAN_TEMP("xo_therm_100k_pu", 1,
>