diff for duplicates of <20180830154518.29507-28-embed3d@gmail.com> diff --git a/a/1.txt b/N1/1.txt index ee93fc2..eb2a119 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -17,14 +17,14 @@ index 1866aec69ec1..0fc447f0c02a 100644 @@ -106,8 +106,15 @@ soc { - sid: eeprom@1c14000 { + sid: eeprom at 1c14000 { + #address-cells = <1>; + #size-cells = <1>; compatible = "allwinner,sun8i-h3-sid"; reg = <0x01c14000 0x400>; + + /* Data cells */ -+ thermal_calibration: calib@234 { ++ thermal_calibration: calib at 234 { + reg = <0x234 0x8>; + }; }; diff --git a/a/content_digest b/N1/content_digest index 1fbe7b8..1d536d9 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,33 +1,8 @@ "ref\020180830154518.29507-1-embed3d@gmail.com\0" - "From\0Philipp Rossak <embed3d@gmail.com>\0" + "From\0embed3d@gmail.com (Philipp Rossak)\0" "Subject\0[PATCH v3 27/30] ARM: dts: sun8i: h3: use calibration for ths\0" "Date\0Thu, 30 Aug 2018 17:45:15 +0200\0" - "To\0lee.jones@linaro.org" - robh+dt@kernel.org - mark.rutland@arm.com - maxime.ripard@bootlin.com - wens@csie.org - linux@armlinux.org.uk - jic23@kernel.org - knaack.h@gmx.de - lars@metafoo.de - pmeerw@pmeerw.net - eugen.hristev@microchip.com - rdunlap@infradead.org - vilhelm.gray@gmail.com - clabbe.montjoie@gmail.com - quentin.schulz@bootlin.com - geert+renesas@glider.be - lukas@wunner.de - icenowy@aosc.io - arnd@arndb.de - broonie@kernel.org - " arnaud.pouliquen@st.com\0" - "Cc\0linux-iio@vger.kernel.org" - devicetree@vger.kernel.org - linux-arm-kernel@lists.infradead.org - linux-kernel@vger.kernel.org - " linux-sunxi@googlegroups.com\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "The H3 SID is supported by the kernel so we can add a NVMEM Data cell,\n" @@ -49,14 +24,14 @@ "@@ -106,8 +106,15 @@\n" " \n" " \tsoc {\n" - " \t\tsid: eeprom@1c14000 {\n" + " \t\tsid: eeprom at 1c14000 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <1>;\n" " \t\t\tcompatible = \"allwinner,sun8i-h3-sid\";\n" " \t\t\treg = <0x01c14000 0x400>;\n" "+\n" "+\t\t\t/* Data cells */\n" - "+\t\t\tthermal_calibration: calib@234 {\n" + "+\t\t\tthermal_calibration: calib at 234 {\n" "+\t\t\t\treg = <0x234 0x8>;\n" "+\t\t\t};\n" " \t\t};\n" @@ -72,4 +47,4 @@ "-- \n" 2.11.0 -ae0b99dcd4b46a2048e106c9a6b92ddc537d43faf5bb6a253d25a7ffe3ccf4b7 +b554c52fa3a19a00ab8e80c399075a5f16d189da0dd1d87fa3b4d84be178183d
diff --git a/a/1.txt b/N2/1.txt index ee93fc2..f3ff99f 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -5,7 +5,7 @@ On the H3 the eFuses are located at the offset 0x200. The thermal data itself has an offset of 0x34 from the eFuse base. So we end on an offset of 0x234. -Signed-off-by: Philipp Rossak <embed3d@gmail.com> +Signed-off-by: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/a/content_digest b/N2/content_digest index 1fbe7b8..abb13d8 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,33 +1,34 @@ "ref\020180830154518.29507-1-embed3d@gmail.com\0" - "From\0Philipp Rossak <embed3d@gmail.com>\0" + "ref\020180830154518.29507-1-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0" + "From\0Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" "Subject\0[PATCH v3 27/30] ARM: dts: sun8i: h3: use calibration for ths\0" "Date\0Thu, 30 Aug 2018 17:45:15 +0200\0" - "To\0lee.jones@linaro.org" - robh+dt@kernel.org - mark.rutland@arm.com - maxime.ripard@bootlin.com - wens@csie.org - linux@armlinux.org.uk - jic23@kernel.org - knaack.h@gmx.de - lars@metafoo.de - pmeerw@pmeerw.net - eugen.hristev@microchip.com - rdunlap@infradead.org - vilhelm.gray@gmail.com - clabbe.montjoie@gmail.com - quentin.schulz@bootlin.com - geert+renesas@glider.be - lukas@wunner.de - icenowy@aosc.io - arnd@arndb.de - broonie@kernel.org - " arnaud.pouliquen@st.com\0" - "Cc\0linux-iio@vger.kernel.org" - devicetree@vger.kernel.org - linux-arm-kernel@lists.infradead.org - linux-kernel@vger.kernel.org - " linux-sunxi@googlegroups.com\0" + "To\0lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org" + robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org + mark.rutland-5wv7dgnIgG8@public.gmane.org + maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org + wens-jdAy2FN1RRM@public.gmane.org + linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org + jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org + knaack.h-Mmb7MZpHnFY@public.gmane.org + lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org + pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org + eugen.hristev-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org + rdunlap-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org + vilhelm.gray-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org + clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org + quentin.schulz-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org + geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org + lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org + icenowy-h8G6r0blFSE@public.gmane.org + arnd-r2nGTMty4D4@public.gmane.org + broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org + " arnaud.pouliquen-qxv4g6HH51o@public.gmane.org\0" + "Cc\0linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + " linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org\0" "\00:1\0" "b\0" "The H3 SID is supported by the kernel so we can add a NVMEM Data cell,\n" @@ -37,7 +38,7 @@ "itself has an offset of 0x34 from the eFuse base. So we end on an offset\n" "of 0x234.\n" "\n" - "Signed-off-by: Philipp Rossak <embed3d@gmail.com>\n" + "Signed-off-by: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "---\n" " arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++\n" " 1 file changed, 9 insertions(+)\n" @@ -72,4 +73,4 @@ "-- \n" 2.11.0 -ae0b99dcd4b46a2048e106c9a6b92ddc537d43faf5bb6a253d25a7ffe3ccf4b7 +1fb330b58ac3b9e9e85de5959484dc2b51fbefca7fc60a972e9b3a59313c1cb2
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.