From: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>,
intel-gfx@lists.freedesktop.org,
Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: Re: [PATCH 1/1] firmware/dmc/icl: load v1.07 on icelake.
Date: Mon, 3 Sep 2018 22:27:14 -0700 [thread overview]
Message-ID: <20180904052714.GC2316@intel.com> (raw)
In-Reply-To: <20180903100039.GA16072@ideak-desk.fi.intel.com>
On Mon, Sep 03, 2018 at 01:00:39PM +0300, Imre Deak wrote:
> On Mon, Aug 27, 2018 at 05:38:44PM -0700, Anusha Srivatsa wrote:
> > Add Support to load DMC on Icelake.
> >
> > While at it, also add support to load the firmware
> > during system resume.
> >
> > v2: load firmware during system resume.(Imre)
> >
> > v3: enable has_csr for icelake.(Jyoti)
> >
> > v4: Only load the firmware in this patch
> >
> > Cc: Jyoti Yadav <jyoti.r.yadav@intel.com>
> > Cc: Imre Deak <imre.deak@intel.com>
> > Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> > Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
> > Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
>
> Reviewed-by: Imre Deak <imre.deak@intel.com>
>
> Is it ok to push this already now that the ICL 1.07 firmware is in [1]
> or do we have to wait until it propagates to [2]?
The main motivation behind having drm-firmware is the unpredictability
of linux-firmware.git pull requests acceptance. It may take 1 day or it
may take 2 months.
So on drm-firmware we at least have it public in a way OSVs
could easisly backport. Although hopefully by the end of 4.20
cycle I believe it will be there on linux-firmware.git already.
So if fw is already on drm-firmware and passing all tests
we should be able to push the patch to dinq.
Thanks,
Rodrigo.
>
> [1] https://cgit.freedesktop.org/drm/drm-firmware/
> [2] https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
>
> > ---
> > drivers/gpu/drm/i915/intel_csr.c | 7 +++++++
> > drivers/gpu/drm/i915/intel_runtime_pm.c | 3 +++
> > 2 files changed, 10 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_csr.c b/drivers/gpu/drm/i915/intel_csr.c
> > index 1ec4f09c61f6..6d9d47322405 100644
> > --- a/drivers/gpu/drm/i915/intel_csr.c
> > +++ b/drivers/gpu/drm/i915/intel_csr.c
> > @@ -34,6 +34,9 @@
> > * low-power state and comes back to normal.
> > */
> >
> > +#define I915_CSR_ICL "i915/icl_dmc_ver1_07.bin"
> > +#define ICL_CSR_VERSION_REQUIRED CSR_VERSION(1, 7)
> > +
> > #define I915_CSR_GLK "i915/glk_dmc_ver1_04.bin"
> > MODULE_FIRMWARE(I915_CSR_GLK);
> > #define GLK_CSR_VERSION_REQUIRED CSR_VERSION(1, 4)
> > @@ -301,6 +304,8 @@ static uint32_t *parse_csr_fw(struct drm_i915_private *dev_priv,
> > if (csr->fw_path == i915_modparams.dmc_firmware_path) {
> > /* Bypass version check for firmware override. */
> > required_version = csr->version;
> > + } else if (IS_ICELAKE(dev_priv)) {
> > + required_version = ICL_CSR_VERSION_REQUIRED;
> > } else if (IS_CANNONLAKE(dev_priv)) {
> > required_version = CNL_CSR_VERSION_REQUIRED;
> > } else if (IS_GEMINILAKE(dev_priv)) {
> > @@ -458,6 +463,8 @@ void intel_csr_ucode_init(struct drm_i915_private *dev_priv)
> >
> > if (i915_modparams.dmc_firmware_path)
> > csr->fw_path = i915_modparams.dmc_firmware_path;
> > + else if (IS_ICELAKE(dev_priv))
> > + csr->fw_path = I915_CSR_ICL;
> > else if (IS_CANNONLAKE(dev_priv))
> > csr->fw_path = I915_CSR_CNL;
> > else if (IS_GEMINILAKE(dev_priv))
> > diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > index 2852395125cd..bd7da068e813 100644
> > --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > @@ -3563,6 +3563,9 @@ static void icl_display_core_init(struct drm_i915_private *dev_priv,
> >
> > /* 7. Setup MBUS. */
> > icl_mbus_init(dev_priv);
> > +
> > + if (resume && dev_priv->csr.dmc_payload)
> > + intel_csr_load_program(dev_priv);
> > }
> >
> > static void icl_display_core_uninit(struct drm_i915_private *dev_priv)
> > --
> > 2.17.1
> >
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-09-04 5:27 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-28 0:38 [PATCH 0/1] Load DMC v1.07 on Icelake Anusha Srivatsa
2018-08-28 0:38 ` [PATCH 1/1] firmware/dmc/icl: load v1.07 on icelake Anusha Srivatsa
2018-09-03 10:00 ` Imre Deak
2018-09-04 5:27 ` Rodrigo Vivi [this message]
2018-09-05 9:07 ` Joonas Lahtinen
2018-09-05 10:11 ` Imre Deak
2018-09-05 16:42 ` Rodrigo Vivi
2018-09-06 6:46 ` Jani Nikula
2018-09-06 17:35 ` Rodrigo Vivi
2018-09-07 7:47 ` Joonas Lahtinen
2018-09-07 18:26 ` Srivatsa, Anusha
2018-09-13 21:22 ` Rodrigo Vivi
2018-09-06 9:50 ` Joonas Lahtinen
2018-09-05 18:55 ` Srivatsa, Anusha
2018-09-05 19:31 ` Rodrigo Vivi
2018-09-05 19:38 ` Srivatsa, Anusha
2018-08-28 1:09 ` ✗ Fi.CI.BAT: failure for Load DMC v1.07 on Icelake (rev2) Patchwork
2018-08-28 5:48 ` Saarinen, Jani
2018-08-28 6:49 ` Yadav, Jyoti R
2018-08-31 15:20 ` ✓ Fi.CI.BAT: success " Patchwork
2018-08-31 22:16 ` ✓ Fi.CI.IGT: " Patchwork
-- strict thread matches above, loose matches on Subject: below --
2018-08-14 4:45 [PATCH 0/1] Icelake DMC v1.07 Anusha Srivatsa
2018-08-14 4:45 ` [PATCH 1/1] firmware/dmc/icl: load v1.07 on icelake Anusha Srivatsa
2018-08-15 11:34 ` Imre Deak
2018-08-15 18:13 ` Srivatsa, Anusha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180904052714.GC2316@intel.com \
--to=rodrigo.vivi@intel.com \
--cc=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.