Re: [RFC bpf-next PATCH] samples/bpf: xdp1 add XDP hardware offload option

[Jesper Dangaard Brouer <brouer@redhat.com>]

On Tue, 4 Sep 2018 17:09:12 +0200
Jakub Kicinski <jakub.kicinski@netronome.com> wrote:

> On Tue, 04 Sep 2018 16:59:19 +0200, Jesper Dangaard Brouer wrote:
> > Trying to use XDP hardware offloading via XDP_FLAGS_HW_MODE
> > and setting the ifindex in prog_load_attr.ifindex before
> > loading the BPF code via bpf_prog_load_xattr().
> > 
> > This unfortunately does not seem to work...
> > - Am I doing something wrong?
> > 
> > Notice, I also disable the map BPF_MAP_TYPE_PERCPU_ARRAY
> > to make sure it was not related to the map (not supporting
> > offloading).
> > 
> > Failed with:
> >  # ./xdp1 -O $(</sys/class/net/enp130s0np1/ifindex)
> >  libbpf: load bpf program failed: Invalid argument
> >  libbpf: failed to load program 'xdp1'
> >  libbpf: failed to load object './xdp1_kern.o'
> > 
> > Tested on kernel 4.18.0-2.el8.x86_64 with driver nfp
> >  Ethernet controller: Netronome Systems, Inc. Device 4000  
> 
> Are you running the BPF capable FW?
> 
> https://help.netronome.com/support/solutions/articles/36000050009-agilio-ebpf-2-0-6-extended-berkeley-packet-filter

I'm likely not running the correct firmware...

Can you tell me, with the ethtool -i output, if I'm running the
appropriate firmware?

# ethtool -i enp129s0np1
driver: nfp
version: 4.18.0-2.el8.x86_64 SMP mod_unl
firmware-version: 0.0.3.5 0.21 nic-2.0.7 nic
expansion-rom-version: 
bus-info: 0000:81:00.0
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: yes
supports-priv-flags: no

If this is a firmware version case, then we should really improve the
errors we are giving the user, the -EINVAL can be anything.

 "libbpf: load bpf program failed: Invalid argument"

-- 
Best regards,
  Jesper Dangaard Brouer
  MSc.CS, Principal Kernel Engineer at Red Hat
  LinkedIn: http://www.linkedin.com/in/brouer