diff for duplicates of <20180907062851.GA7336@super_plancton>

diff --git a/a/1.txt b/N1/1.txt
index 00c3af4..8a593b6 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -1,7 +1,7 @@
-Le mercredi 08 ao?t 2018 ? 18:00:28 (+0300), Neftin, Sasha a ?crit :
+Le mercredi 08 août 2018 à 18:00:28 (+0300), Neftin, Sasha a écrit :
 > On 8/8/2018 17:24, Neftin, Sasha wrote:
 > > On 8/7/2018 09:42, Camille Bordignon wrote:
-> > > Le lundi 06 ao?t 2018 ? 15:45:29 (-0700), Alexander Duyck a ?crit :
+> > > Le lundi 06 août 2018 à 15:45:29 (-0700), Alexander Duyck a écrit :
 > > > > On Mon, Aug 6, 2018 at 4:59 AM, Camille Bordignon
 > > > > <camille.bordignon@easymile.com> wrote:
 > > > > > Hello,
@@ -11,7 +11,7 @@ Le mercredi 08 ao?t 2018 ? 18:00:28 (+0300), Neftin, Sasha a ?crit :
 > > > > > It seems that after a wire reconnection, auto-negotation "fails" and
 > > > > > link speed drips to 10 Mbps.
 > > > > > 
-> > > > > ?From kernel logs:
+> > > > >  From kernel logs:
 > > > > > [17616.346150] e1000e: enp0s31f6 NIC Link is Down
 > > > > > [17627.003322] e1000e: enp0s31f6 NIC Link is Up 10 Mbps Full
 > > > > > Duplex, Flow Control: None
@@ -21,31 +21,31 @@ Le mercredi 08 ao?t 2018 ? 18:00:28 (+0300), Neftin, Sasha a ?crit :
 > > > > > 
 > > > > > $ethtool enp0s31f6
 > > > > > Settings for enp0s31f6:
-> > > > > ???????? Supported ports: [ TP ]
-> > > > > ???????? Supported link modes:?? 10baseT/Half 10baseT/Full
-> > > > > ???????????????????????????????? 100baseT/Half 100baseT/Full
-> > > > > ???????????????????????????????? 1000baseT/Full
-> > > > > ???????? Supported pause frame use: No
-> > > > > ???????? Supports auto-negotiation: Yes
-> > > > > ???????? Supported FEC modes: Not reported
-> > > > > ???????? Advertised link modes:? 10baseT/Half 10baseT/Full
-> > > > > ???????????????????????????????? 100baseT/Half 100baseT/Full
-> > > > > ???????????????????????????????? 1000baseT/Full
-> > > > > ???????? Advertised pause frame use: No
-> > > > > ???????? Advertised auto-negotiation: Yes
-> > > > > ???????? Advertised FEC modes: Not reported
-> > > > > ???????? Speed: 10Mb/s
-> > > > > ???????? Duplex: Full
-> > > > > ???????? Port: Twisted Pair
-> > > > > ???????? PHYAD: 1
-> > > > > ???????? Transceiver: internal
-> > > > > ???????? Auto-negotiation: on
-> > > > > ???????? MDI-X: on (auto)
-> > > > > ???????? Supports Wake-on: pumbg
-> > > > > ???????? Wake-on: g
-> > > > > ???????? Current message level: 0x00000007 (7)
-> > > > > ??????????????????????????????? drv probe link
-> > > > > ???????? Link detected: yes
+> > > > >          Supported ports: [ TP ]
+> > > > >          Supported link modes:   10baseT/Half 10baseT/Full
+> > > > >                                  100baseT/Half 100baseT/Full
+> > > > >                                  1000baseT/Full
+> > > > >          Supported pause frame use: No
+> > > > >          Supports auto-negotiation: Yes
+> > > > >          Supported FEC modes: Not reported
+> > > > >          Advertised link modes:  10baseT/Half 10baseT/Full
+> > > > >                                  100baseT/Half 100baseT/Full
+> > > > >                                  1000baseT/Full
+> > > > >          Advertised pause frame use: No
+> > > > >          Advertised auto-negotiation: Yes
+> > > > >          Advertised FEC modes: Not reported
+> > > > >          Speed: 10Mb/s
+> > > > >          Duplex: Full
+> > > > >          Port: Twisted Pair
+> > > > >          PHYAD: 1
+> > > > >          Transceiver: internal
+> > > > >          Auto-negotiation: on
+> > > > >          MDI-X: on (auto)
+> > > > >          Supports Wake-on: pumbg
+> > > > >          Wake-on: g
+> > > > >          Current message level: 0x00000007 (7)
+> > > > >                                 drv probe link
+> > > > >          Link detected: yes
 > > > > > 
 > > > > > 
 > > > > > Notice that if disconnection last less than about 5 seconds,
@@ -67,14 +67,14 @@ Le mercredi 08 ao?t 2018 ? 18:00:28 (+0300), Neftin, Sasha a ?crit :
 > > > > > +++ b/drivers/net/ethernet/intel/e1000e/netdev.c
 > > > > > @@ -5069,7 +5069,7 @@ static bool e1000e_has_link(struct
 > > > > > e1000_adapter *adapter)
-> > > > > ???????? case e1000_media_type_copper:
-> > > > > ???????????????? if (hw->mac.get_link_status) {
-> > > > > ???????????????????????? ret_val = hw->mac.ops.check_for_link(hw);
-> > > > > -?????????????????????? link_active = !hw->mac.get_link_status;
-> > > > > +?????????????????????? link_active = false;
-> > > > > ???????????????? } else {
-> > > > > ???????????????????????? link_active = true;
-> > > > > ???????????????? }
+> > > > >          case e1000_media_type_copper:
+> > > > >                  if (hw->mac.get_link_status) {
+> > > > >                          ret_val = hw->mac.ops.check_for_link(hw);
+> > > > > -                       link_active = !hw->mac.get_link_status;
+> > > > > +                       link_active = false;
+> > > > >                  } else {
+> > > > >                          link_active = true;
+> > > > >                  }
 > > > > > 
 > > > > > Maybe this is related to watchdog task.
 > > > > > 
@@ -109,7 +109,7 @@ Le mercredi 08 ao?t 2018 ? 18:00:28 (+0300), Neftin, Sasha a ?crit :
 > > > Camille Bordignon
 > > > _______________________________________________
 > > > Intel-wired-lan mailing list
-> > > Intel-wired-lan at osuosl.org
+> > > Intel-wired-lan@osuosl.org
 > > > https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
 > > > 
 > > I've agree with Alex. Let's try add 2s delay after a link event. Please,
@@ -118,7 +118,7 @@ Le mercredi 08 ao?t 2018 ? 18:00:28 (+0300), Neftin, Sasha a ?crit :
 > > see if you see same problem.
 > > _______________________________________________
 > > Intel-wired-lan mailing list
-> > Intel-wired-lan at osuosl.org
+> > Intel-wired-lan@osuosl.org
 > > https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
 > Camille,
 > My apologies, I wrong understand Alex. Please, do not try add delay. Please,
diff --git a/a/content_digest b/N1/content_digest
index c94e440..deeeff5 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -4,15 +4,21 @@
  "ref\0001556a4-c49c-b96b-0be8-b3c4be7bb09c@intel.com\0"
  "ref\0c1e2cf13-6bcc-498d-03ea-7c3792d675cb@intel.com\0"
  "From\0Camille Bordignon <camille.bordignon@easymile.com>\0"
- "Subject\0[Intel-wired-lan] e1000e driver stuck at 10Mbps after reconnection\0"
+ "Subject\0Re: [Intel-wired-lan] e1000e driver stuck at 10Mbps after reconnection\0"
  "Date\0Fri, 7 Sep 2018 08:28:51 +0200\0"
- "To\0intel-wired-lan@osuosl.org\0"
+ "To\0Neftin"
+ " Sasha <sasha.neftin@intel.com>\0"
+ "Cc\0Alexander Duyck <alexander.duyck@gmail.com>"
+  Netdev <netdev@vger.kernel.org>
+  intel-wired-lan <intel-wired-lan@lists.osuosl.org>
+  David S. Miller <davem@davemloft.net>
+ " linux-kernel@vger.kernel.org\0"
  "\00:1\0"
  "b\0"
- "Le mercredi 08 ao?t 2018 ? 18:00:28 (+0300), Neftin, Sasha a ?crit :\n"
+ "Le mercredi 08 ao\303\273t 2018 \303\240 18:00:28 (+0300), Neftin, Sasha a \303\251crit :\n"
  "> On 8/8/2018 17:24, Neftin, Sasha wrote:\n"
  "> > On 8/7/2018 09:42, Camille Bordignon wrote:\n"
- "> > > Le lundi 06 ao?t 2018 ? 15:45:29 (-0700), Alexander Duyck a ?crit :\n"
+ "> > > Le lundi 06 ao\303\273t 2018 \303\240 15:45:29 (-0700), Alexander Duyck a \303\251crit :\n"
  "> > > > On Mon, Aug 6, 2018 at 4:59 AM, Camille Bordignon\n"
  "> > > > <camille.bordignon@easymile.com> wrote:\n"
  "> > > > > Hello,\n"
@@ -22,7 +28,7 @@
  "> > > > > It seems that after a wire reconnection, auto-negotation \"fails\" and\n"
  "> > > > > link speed drips to 10 Mbps.\n"
  "> > > > > \n"
- "> > > > > ?From kernel logs:\n"
+ "> > > > > \302\240From kernel logs:\n"
  "> > > > > [17616.346150] e1000e: enp0s31f6 NIC Link is Down\n"
  "> > > > > [17627.003322] e1000e: enp0s31f6 NIC Link is Up 10 Mbps Full\n"
  "> > > > > Duplex, Flow Control: None\n"
@@ -32,31 +38,31 @@
  "> > > > > \n"
  "> > > > > $ethtool enp0s31f6\n"
  "> > > > > Settings for enp0s31f6:\n"
- "> > > > > ???????? Supported ports: [ TP ]\n"
- "> > > > > ???????? Supported link modes:?? 10baseT/Half 10baseT/Full\n"
- "> > > > > ???????????????????????????????? 100baseT/Half 100baseT/Full\n"
- "> > > > > ???????????????????????????????? 1000baseT/Full\n"
- "> > > > > ???????? Supported pause frame use: No\n"
- "> > > > > ???????? Supports auto-negotiation: Yes\n"
- "> > > > > ???????? Supported FEC modes: Not reported\n"
- "> > > > > ???????? Advertised link modes:? 10baseT/Half 10baseT/Full\n"
- "> > > > > ???????????????????????????????? 100baseT/Half 100baseT/Full\n"
- "> > > > > ???????????????????????????????? 1000baseT/Full\n"
- "> > > > > ???????? Advertised pause frame use: No\n"
- "> > > > > ???????? Advertised auto-negotiation: Yes\n"
- "> > > > > ???????? Advertised FEC modes: Not reported\n"
- "> > > > > ???????? Speed: 10Mb/s\n"
- "> > > > > ???????? Duplex: Full\n"
- "> > > > > ???????? Port: Twisted Pair\n"
- "> > > > > ???????? PHYAD: 1\n"
- "> > > > > ???????? Transceiver: internal\n"
- "> > > > > ???????? Auto-negotiation: on\n"
- "> > > > > ???????? MDI-X: on (auto)\n"
- "> > > > > ???????? Supports Wake-on: pumbg\n"
- "> > > > > ???????? Wake-on: g\n"
- "> > > > > ???????? Current message level: 0x00000007 (7)\n"
- "> > > > > ??????????????????????????????? drv probe link\n"
- "> > > > > ???????? Link detected: yes\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Supported ports: [ TP ]\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Supported link modes:\302\240\302\240 10baseT/Half 10baseT/Full\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 100baseT/Half 100baseT/Full\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 1000baseT/Full\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Supported pause frame use: No\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Supports auto-negotiation: Yes\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Supported FEC modes: Not reported\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Advertised link modes:\302\240 10baseT/Half 10baseT/Full\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 100baseT/Half 100baseT/Full\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 1000baseT/Full\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Advertised pause frame use: No\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Advertised auto-negotiation: Yes\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Advertised FEC modes: Not reported\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Speed: 10Mb/s\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Duplex: Full\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Port: Twisted Pair\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 PHYAD: 1\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Transceiver: internal\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Auto-negotiation: on\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 MDI-X: on (auto)\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Supports Wake-on: pumbg\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Wake-on: g\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Current message level: 0x00000007 (7)\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 drv probe link\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 Link detected: yes\n"
  "> > > > > \n"
  "> > > > > \n"
  "> > > > > Notice that if disconnection last less than about 5 seconds,\n"
@@ -78,14 +84,14 @@
  "> > > > > +++ b/drivers/net/ethernet/intel/e1000e/netdev.c\n"
  "> > > > > @@ -5069,7 +5069,7 @@ static bool e1000e_has_link(struct\n"
  "> > > > > e1000_adapter *adapter)\n"
- "> > > > > ???????? case e1000_media_type_copper:\n"
- "> > > > > ???????????????? if (hw->mac.get_link_status) {\n"
- "> > > > > ???????????????????????? ret_val = hw->mac.ops.check_for_link(hw);\n"
- "> > > > > -?????????????????????? link_active = !hw->mac.get_link_status;\n"
- "> > > > > +?????????????????????? link_active = false;\n"
- "> > > > > ???????????????? } else {\n"
- "> > > > > ???????????????????????? link_active = true;\n"
- "> > > > > ???????????????? }\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 case e1000_media_type_copper:\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 if (hw->mac.get_link_status) {\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 ret_val = hw->mac.ops.check_for_link(hw);\n"
+ "> > > > > -\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 link_active = !hw->mac.get_link_status;\n"
+ "> > > > > +\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 link_active = false;\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 } else {\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 link_active = true;\n"
+ "> > > > > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240 }\n"
  "> > > > > \n"
  "> > > > > Maybe this is related to watchdog task.\n"
  "> > > > > \n"
@@ -120,7 +126,7 @@
  "> > > Camille Bordignon\n"
  "> > > _______________________________________________\n"
  "> > > Intel-wired-lan mailing list\n"
- "> > > Intel-wired-lan at osuosl.org\n"
+ "> > > Intel-wired-lan@osuosl.org\n"
  "> > > https://lists.osuosl.org/mailman/listinfo/intel-wired-lan\n"
  "> > > \n"
  "> > I've agree with Alex. Let's try add 2s delay after a link event. Please,\n"
@@ -129,7 +135,7 @@
  "> > see if you see same problem.\n"
  "> > _______________________________________________\n"
  "> > Intel-wired-lan mailing list\n"
- "> > Intel-wired-lan at osuosl.org\n"
+ "> > Intel-wired-lan@osuosl.org\n"
  "> > https://lists.osuosl.org/mailman/listinfo/intel-wired-lan\n"
  "> Camille,\n"
  "> My apologies, I wrong understand Alex. Please, do not try add delay. Please,\n"
@@ -155,4 +161,4 @@
  "\n"
  Camille Bordignon
 
-9a487e02c97eaa3171b76231f9de604158a5ad4296d877144cd097cd39603e74
+841336e5676a169f206b30d1a8cd6f3ddfc67bd374ff73c48b23420c67127017
