From mboxrd@z Thu Jan 1 00:00:00 1970 From: hch@infradead.org (Christoph Hellwig) Date: Mon, 10 Sep 2018 06:41:47 -0700 Subject: Post-4.19 WIP Branch Cleanup, riscv-linux-4.18, and 4.20 plans In-Reply-To: References: Message-ID: <20180910134147.GA25264@infradead.org> To: linux-riscv@lists.infradead.org List-Id: linux-riscv.lists.infradead.org On Thu, Sep 06, 2018 at 02:45:00AM -0700, Palmer Dabbelt wrote: > > I think gpio & pwm are required as well. I couldn't get networking up > > without the GPIO driver. > > That makes sense: IIRC the GPIO twiddles the pins that control the Ethernet phy. > > > https://github.com/riscv/riscv-linux/commit/7b012f300afcff77c20a4d84519f4bd2b9b17bd0 > > > > https://github.com/riscv/riscv-linux/commit/d6e84658098c6f37875a9e4b151706c6b541dc0b > > Thanks. I've grabbed both of these into WIP branches for now, they're at > least the self contained type so it should be viable to start cleaning them > up, pending time. Btw, do we have volunteers for given drivers? I think Paul is trying to handle the serial driver. I'll try to spend some time on one or two, and have a SiFive board now. but I won't really have time to try it until the end of the month as I'm busy travelling and at conferences.