From: dsahern@kernel.org
To: netdev@vger.kernel.org
Cc: lucien.xin@gmail.com, David Ahern <dsahern@gmail.com>
Subject: [PATCH net-next] net/ipv6: Remove rt6i_prefsrc
Date: Mon, 10 Sep 2018 09:11:28 -0700 [thread overview]
Message-ID: <20180910161128.25520-1-dsahern@kernel.org> (raw)
From: David Ahern <dsahern@gmail.com>
After the conversion to fib6_info, rt6i_prefsrc has a single user that
reads the value and otherwise it is only set. The one reader can be
converted to use rt->from so rt6i_prefsrc can be removed, reducing
rt6_info by another 20 bytes.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
drivers/scsi/cxgbi/libcxgbi.c | 4 ++--
include/net/ip6_fib.h | 1 -
net/ipv6/route.c | 27 ---------------------------
3 files changed, 2 insertions(+), 30 deletions(-)
diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index 3f3af5e74a07..6b3ea50c594e 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -784,7 +784,7 @@ cxgbi_check_route6(struct sockaddr *dst_addr, int ifindex)
csk->mtu = mtu;
csk->dst = dst;
- if (ipv6_addr_any(&rt->rt6i_prefsrc.addr)) {
+ if (!rt->from || ipv6_addr_any(&rt->from->fib6_prefsrc.addr)) {
struct inet6_dev *idev = ip6_dst_idev((struct dst_entry *)rt);
err = ipv6_dev_get_saddr(&init_net, idev ? idev->dev : NULL,
@@ -795,7 +795,7 @@ cxgbi_check_route6(struct sockaddr *dst_addr, int ifindex)
goto rel_rt;
}
} else {
- pref_saddr = rt->rt6i_prefsrc.addr;
+ pref_saddr = rt->from->fib6_prefsrc.addr;
}
csk->csk_family = AF_INET6;
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 3d4930528db0..c7496663f99a 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -182,7 +182,6 @@ struct rt6_info {
struct in6_addr rt6i_gateway;
struct inet6_dev *rt6i_idev;
u32 rt6i_flags;
- struct rt6key rt6i_prefsrc;
struct list_head rt6i_uncached;
struct uncached_list *rt6i_uncached_list;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 18e00ce1719a..41f04b966008 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -995,7 +995,6 @@ static void ip6_rt_copy_init(struct rt6_info *rt, struct fib6_info *ort)
#ifdef CONFIG_IPV6_SUBTREES
rt->rt6i_src = ort->fib6_src;
#endif
- rt->rt6i_prefsrc = ort->fib6_prefsrc;
}
static struct fib6_node* fib6_backtrack(struct fib6_node *fn,
@@ -1449,11 +1448,6 @@ static int rt6_insert_exception(struct rt6_info *nrt,
if (ort->fib6_src.plen)
src_key = &nrt->rt6i_src.addr;
#endif
-
- /* Update rt6i_prefsrc as it could be changed
- * in rt6_remove_prefsrc()
- */
- nrt->rt6i_prefsrc = ort->fib6_prefsrc;
/* rt6_mtu_change() might lower mtu on ort.
* Only insert this exception route if its mtu
* is less than ort's mtu value.
@@ -1635,25 +1629,6 @@ static void rt6_update_exception_stamp_rt(struct rt6_info *rt)
rcu_read_unlock();
}
-static void rt6_exceptions_remove_prefsrc(struct fib6_info *rt)
-{
- struct rt6_exception_bucket *bucket;
- struct rt6_exception *rt6_ex;
- int i;
-
- bucket = rcu_dereference_protected(rt->rt6i_exception_bucket,
- lockdep_is_held(&rt6_exception_lock));
-
- if (bucket) {
- for (i = 0; i < FIB6_EXCEPTION_BUCKET_SIZE; i++) {
- hlist_for_each_entry(rt6_ex, &bucket->chain, hlist) {
- rt6_ex->rt6i->rt6i_prefsrc.plen = 0;
- }
- bucket++;
- }
- }
-}
-
static bool rt6_mtu_change_route_allowed(struct inet6_dev *idev,
struct rt6_info *rt, int mtu)
{
@@ -3795,8 +3770,6 @@ static int fib6_remove_prefsrc(struct fib6_info *rt, void *arg)
spin_lock_bh(&rt6_exception_lock);
/* remove prefsrc entry */
rt->fib6_prefsrc.plen = 0;
- /* need to update cache as well */
- rt6_exceptions_remove_prefsrc(rt);
spin_unlock_bh(&rt6_exception_lock);
}
return 0;
--
2.11.0
next reply other threads:[~2018-09-10 21:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-10 16:11 dsahern [this message]
2018-09-10 17:02 ` [PATCH net-next] net/ipv6: Remove rt6i_prefsrc David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180910161128.25520-1-dsahern@kernel.org \
--to=dsahern@kernel.org \
--cc=dsahern@gmail.com \
--cc=lucien.xin@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.