From: Denys Dmytriyenko <denys@ti.com>
To: "Stiffler, Jacob" <j-stiffler@ti.com>
Cc: "meta-ti@yoctoproject.org" <meta-ti@yoctoproject.org>
Subject: Re: [EXTERNAL] [PATCH 3/3 v2] Added DSPLIB recipe to build DSPLIB from source. Updated includes/ti-paths.inc for MATHLIB and DSPLIB.
Date: Thu, 13 Sep 2018 14:35:20 -0400 [thread overview]
Message-ID: <20180913183520.GI12296@beryl> (raw)
In-Reply-To: <20180913163440.GV12296@beryl>
Jake, Jianzhong,
I have re-posted the cleaned up patches I had in rocko-next. Please use those
for fixing the COMPATIBLE_MACHINE issue. For now I'll drop them, as I need
rocko-next freed up.
Denys
On Thu, Sep 13, 2018 at 12:34:40PM -0400, Denys Dmytriyenko wrote:
> On Thu, Sep 13, 2018 at 12:01:32PM -0400, Stiffler, Jacob wrote:
> > That will work as c66x is a subset of the keystone SOC family.
> >
> >
> >
> > I just don’t think that specifying COMPATIBLE_MACHINE is necessary as
> > these packages are independent of the architecture that is running Linux.
>
> Agree.
>
>
> > And due to this, we should also remove the ‘PACKAGE_ARCH =
> > ${MACHINE_ARCH}”’ as there is no difference between the resulting packages
> > for any machine.
>
> Also agree.
>
>
> > IMHO, COMPATIBLE_MACHINE has been overused and it creates more problems
> > that it solves.
>
> I've been saying this for years! Still, the response from developers was that
> they only tested it on one platform, hence it's only compatible with this one
> platform...
>
>
> Jake,
>
> Please work with your team to explain this and stop abusing COMPATIBLE_MACHINE
> variable. We'll also need to work with RTOS team for the same...
>
> --
> Denys
>
>
> >
> >
> >
> > - Jake
> >
> >
> >
> > From: Xu, Jianzhong
> > Sent: Thursday, September 13, 2018 11:45 AM
> > To: Dmytriyenko, Denys; Stiffler, Jacob
> > Cc: meta-ti@yoctoproject.org
> > Subject: Re: [meta-ti] [EXTERNAL] [PATCH 3/3 v2] Added DSPLIB recipe to
> > build DSPLIB from source. Updated includes/ti-paths.inc for MATHLIB and
> > DSPLIB.
> >
> >
> >
> > Denys,
> >
> >
> >
> > Would the following fix the problems you've seen:
> >
> >
> >
> > COMPATIBLE_MACHINE = "omap-a15|keystone"
> >
> >
> >
> > This was in DSPLIB recipes before.
> >
> >
> >
> > Thanks,
> >
> > Jianzhong
> >
> > ------------------------------------------------------------------------
> >
> > From: Dmytriyenko, Denys
> > Sent: Thursday, September 13, 2018 11:26:45 AM
> > To: Stiffler, Jacob
> > Cc: Xu, Jianzhong; meta-ti@yoctoproject.org
> > Subject: Re: [meta-ti] [EXTERNAL] [PATCH 3/3 v2] Added DSPLIB recipe to
> > build DSPLIB from source. Updated includes/ti-paths.inc for MATHLIB and
> > DSPLIB.
> >
> >
> >
> > On Thu, Sep 13, 2018 at 07:26:12AM -0400, Jacob Stiffler wrote:
> > >
> > >
> > > On 9/12/2018 6:52 PM, Denys Dmytriyenko wrote:
> > > >Same for dra7xx-evm...
> > > >
> > > >
> > > >On Wed, Sep 12, 2018 at 04:37:48PM -0400, Dmytriyenko, Denys wrote:
> > > >>And it crashed and burned right away:
> > > >>
> > > >>ERROR: Nothing PROVIDES 'dsplib-c66x' (but
> > /OE/arago-rocko-next-build/sources/meta-arago/meta-arago-extras/recipes-apps/video-analytics-demo/qt-opencv-opencl-opengl-multithreaded_git.bb
> > DEPENDS on or otherwise requires it)
> > > >>dsplib-c66x was skipped: incompatible with machine am57xx-hs-evm (not
> > in COMPATIBLE_MACHINE)
> > > >>NOTE: Runtime target 'qt-opencv-opencl-opengl-multithreaded-src' is
> > unbuildable, removing...
> > > >>
> > > >>Jake,
> > > >>
> > > >>Did you tested it on am57xx-hs-evm?
> > >
> > > I had only built for am57xx-evm as there are no machine overrides in
> > these
> > > recipes because they are DSP architecture-specific.
> > >
> > > Looks like we should change "COMPATIBLE_MACHINE" to, at the very least,
> > > include what was there before (omap-a15|keystone). But as these are
> > specific
> > > to the DSP architecture, should COMPATIBLE_MACHINE even be necessary?
> >
> > Either way should be fine. Currently those patches break too many
> > platforms -
> > dra7 GP and both am5/dra7 HS.
> >
> > > >>Denys
> > > >>
> > > >>
> > > >>>-----Original Message-----
> > > >>>From: Denys Dmytriyenko [mailto:denys@ti.com]
> > > >>>Sent: Wednesday, September 12, 2018 4:21 PM
> > > >>>To: Xu, Jianzhong
> > > >>>Cc: Stiffler, Jacob; meta-ti@yoctoproject.org
> > > >>>Subject: Re: [meta-ti] [EXTERNAL] [PATCH 3/3 v2] Added DSPLIB recipe
> > to build
> > > >>>DSPLIB from source. Updated includes/ti-paths.inc for MATHLIB and
> > DSPLIB.
> > > >>>
> > > >>>Thanks, merged into rocko-next for testing.
> > > >>>
> > > >>>There were lots of small non-critical things I had to fix, like
> > whitespaces,
> > > >>>indentation, etc. But the biggest one is that you have to follow
> > OpenEmbedded
> > > >>>Commit Message Guidelines:
> > > >>>
> > > >>>https://www.openembedded.org/wiki/Commit_Patch_Message_Guidelines
> > > >>>
> > > >>>
> > > >>>On Wed, Sep 12, 2018 at 03:40:42PM -0400, Xu, Jianzhong wrote:
> > > >>>> Denys,
> > > >>>>
> > > >>>>
> > > >>>>
> > > >>>> You're right. The versioning was inconsistent. Please use
> > > >>>> [EXTERNAL,3/3,v2] and newer versions of [EXTERNAL,2/3],
> > [EXTERNAL,1/3].
> > > >>>> The latter two should have had v2 in it. Please see highlights
> > below.
> > > >>>>
> > > >>>>
> > > >>>>
> > > >>>>
> > +------------------------------------------------------------------------+
> > > >>>> |[EXTERNAL,3/3,v2] Added DSPLIB recipe to |
> > | || |
> > > >>>> |build DSPLIB from source. Updated
> > |2018-09-06|Jianzhong Xu||New|
> > > >>>> |includes/ti-paths.inc for MATHLIB and |
> > | || |
> > > >>>> |DSPLIB. |
> > | || |
> > > >>>>
> > |-------------------------------------------+----------+------------++---|
> > > >>>> |[EXTERNAL] Added DSPLIB recipe to build |
> > | || |
> > > >>>> |DSPLIB from source. Updated
> > |2018-09-06|Jianzhong Xu||New|
> > > >>>> |includes/ti-paths.inc for MATHLIB and |
> > | || |
> > > >>>> |DSPLIB. |
> > | || |
> > > >>>>
> > |-------------------------------------------+----------+------------++---|
> > > >>>> |[EXTERNAL,3/3] Added DSPLIB recipe to
> > build|2018-09-04|Jianzhong
> > > >>>Xu||New|
> > > >>>> |DSPLIB from source. |
> > | || |
> > > >>>>
> > |-------------------------------------------+----------+------------++---|
> > > >>>> |[EXTERNAL,2/3] Added MATHLIB recipe to
> > |2018-09-04|Jianzhong
> > > >>>Xu||New|
> > > >>>> |build MATHLIB from source. |
> > | || |
> > > >>>>
> > |-------------------------------------------+----------+------------++---|
> > > >>>> |[EXTERNAL,1/3] Added SWTOOLS which is |
> > | || |
> > > >>>> |needed to build processor libs (DSPLIB,
> > |2018-09-04|Jianzhong Xu||New|
> > > >>>> |MATHLIB, etc) from source. |
> > | || |
> > > >>>>
> > +------------------------------------------------------------------------+
> > > >>>>
> > > >>>>
> > > >>>>
> > > >>>> Thanks,
> > > >>>>
> > > >>>> Jianzhong
> > > >>>>
> > > >>>>
> > > >>>>
> > > >>>> -----Original Message-----
> > > >>>> From: Dmytriyenko, Denys
> > > >>>> Sent: Wednesday, September 12, 2018 3:13 PM
> > > >>>> To: Stiffler, Jacob
> > > >>>> Cc: Xu, Jianzhong; meta-ti@yoctoproject.org
> > > >>>> Subject: Re: [meta-ti] [EXTERNAL] [PATCH 3/3 v2] Added DSPLIB
> > recipe to
> > > >>>> build DSPLIB from source. Updated includes/ti-paths.inc for
> > MATHLIB and
> > > >>>> DSPLIB.
> > > >>>>
> > > >>>>
> > > >>>>
> > > >>>> Jake,
> > > >>>>
> > > >>>>
> > > >>>>
> > > >>>> I'll give it a look - I assume you want the 3 most recent
> > patches, I don't
> > > >>>>
> > > >>>> think versioning was consistent...
> > > >>>>
> > > >>>>
> > > >>>>
> > > >>>> Denys
> > > >>>>
> > > >>>>
> > > >>>>
> > > >>>>
> > > >>>>
> > > >>>> On Tue, Sep 11, 2018 at 09:17:49AM -0400, Jacob Stiffler wrote:
> > > >>>>
> > > >>>> > ACK
> > > >>>>
> > > >>>> >
> > > >>>>
> > > >>>> >
> > > >>>>
> > > >>>> > Denys,
> > > >>>>
> > > >>>> >
> > > >>>>
> > > >>>> > Can you apply these patches to the ti2018.03 branch?
> > > >>>>
> > > >>>> >
> > > >>>>
> > > >>>> >
> > > >>>>
> > > >>>> > Thank you,
> > > >>>>
> > > >>>> >
> > > >>>>
> > > >>>> > Jake
> > > >>>>
> > > >>>> >
> > > >>>>
> > > >>>> >
> > > >>>>
> > > >>>> > On 9/6/2018 1:46 PM, Jianzhong Xu wrote:
> > > >>>>
> > > >>>> > >Signed-off-by: Jianzhong Xu <xuj@ti.com>
> > > >>>>
> > > >>>> > >---
> > > >>>>
> > > >>>> > >Change from previous version of patch
> > > >>>>
> > > >>>> > >Corrected typo: MATHLIB_C674INSTALL_XXX should have been
> > > >>>> MATHLIB_C674_INSTALL_XXX
> > > >>>>
> > > >>>> > >---
> > > >>>>
> > > >>>> > >---
> > > >>>>
> > > >>>> > > recipes-ti/dsplib/dsplib-c64xp_git.bb | 9 ++++
> > > >>>>
> > > >>>> > > recipes-ti/dsplib/dsplib-c66x.inc | 30 ------------
> > > >>>>
> > > >>>> > > recipes-ti/dsplib/dsplib-c66x_3.4.0.0.bb | 9 ----
> > > >>>>
> > > >>>> > > recipes-ti/dsplib/dsplib-c66x_git.bb | 10 ++++
> > > >>>>
> > > >>>> > > recipes-ti/dsplib/dsplib-c674x_git.bb | 9 ++++
> > > >>>>
> > > >>>> > > recipes-ti/dsplib/dsplib.inc | 79
> > > >>>> ++++++++++++++++++++++++++++++++
> > > >>>>
> > > >>>> > > recipes-ti/includes/ti-paths.inc | 8 +++-
> > > >>>>
> > > >>>> > > 7 files changed, 114 insertions(+), 40 deletions(-)
> > > >>>>
> > > >>>> > > create mode 100644 recipes-ti/dsplib/dsplib-c64xp_git.bb
> > > >>>>
> > > >>>> > > delete mode 100644 recipes-ti/dsplib/dsplib-c66x.inc
> > > >>>>
> > > >>>> > > delete mode 100644 recipes-ti/dsplib/dsplib-c66x_3.4.0.0.bb
> > > >>>>
> > > >>>> > > create mode 100644 recipes-ti/dsplib/dsplib-c66x_git.bb
> > > >>>>
> > > >>>> > > create mode 100644 recipes-ti/dsplib/dsplib-c674x_git.bb
> > > >>>>
> > > >>>> > > create mode 100644 recipes-ti/dsplib/dsplib.inc
> > > >>>>
> > > >>>> > >
> > > >>>>
> > > >>>> > >diff --git a/recipes-ti/dsplib/dsplib-c64xp_git.bb
> > > >>>> b/recipes-ti/dsplib/dsplib-c64xp_git.bb
> > > >>>>
> > > >>>> > >new file mode 100644
> > > >>>>
> > > >>>> > >index 0000000..1038d44
> > > >>>>
> > > >>>> > >--- /dev/null
> > > >>>>
> > > >>>> > >+++ b/recipes-ti/dsplib/dsplib-c64xp_git.bb
> > > >>>>
> > > >>>> > >@@ -0,0 +1,9 @@
> > > >>>>
> > > >>>> > >+MATHLIB_INSTALL_DIR = "${MATHLIB_C64P_INSTALL_DIR}/packages"
> > > >>>>
> > > >>>> > >+DSPLIB_INSTALL_DIR_RECIPE =
> > "${DSPLIB_C64P_INSTALL_DIR_RECIPE}"
> > > >>>>
> > > >>>> > >+DSPLIB_INSTALL_DIR = "${DSPLIB_C64P_INSTALL_DIR}"
> > > >>>>
> > > >>>> > >+DSPLIB_BUILD_TARGET = "c64Px"
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+DEPENDS = ""
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+include dsplib.inc
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >diff --git a/recipes-ti/dsplib/dsplib-c66x.inc
> > > >>>> b/recipes-ti/dsplib/dsplib-c66x.inc
> > > >>>>
> > > >>>> > >deleted file mode 100644
> > > >>>>
> > > >>>> > >index 7ff99c2..0000000
> > > >>>>
> > > >>>> > >--- a/recipes-ti/dsplib/dsplib-c66x.inc
> > > >>>>
> > > >>>> > >+++ /dev/null
> > > >>>>
> > > >>>> > >@@ -1,30 +0,0 @@
> > > >>>>
> > > >>>> > >-DESCRIPTION = "DSPLIB contains optimized general-purpose
> > > >>>> signal-processing routines for TI DSPs"
> > > >>>>
> > > >>>> > >-HOMEPAGE = "http://www.ti.com/tool/sprc265"
> > > >>>>
> > > >>>> > >-SECTION = "devel"
> > > >>>>
> > > >>>> > >-LICENSE = "BSD-3-Clause"
> > > >>>>
> > > >>>> > >-
> > > >>>>
> > > >>>> > >-require ../includes/ti-paths.inc
> > > >>>>
> > > >>>> > >-require ../includes/ti-staging.inc
> > > >>>>
> > > >>>> > >-require ../includes/ti-unpack.inc
> > > >>>>
> > > >>>> > >-
> > > >>>>
> > > >>>> > >-COMPATIBLE_MACHINE = "omap-a15|keystone"
> > > >>>>
> > > >>>> > >-
> > > >>>>
> > > >>>> > >-SRC_URI =
> > > >>>> "http://software-
> > >
> > >>>dl.ti.com/sdoemb/sdoemb_public_sw/dsplib/${PV}/exports/${BINFILE};name=d
> > > >>>splib"
> > > >>>> > >-
> > > >>>>
> > > >>>> > >-BINFILE = "dsplib_c66x_${PV}_Linux.bin"
> > > >>>>
> > > >>>> > >-TI_BIN_UNPK_ARGS = "--mode silent --prefix ${S}"
> > > >>>>
> > > >>>> > >-TI_BIN_UNPK_CMDS = ""
> > > >>>>
> > > >>>> > >-
> > > >>>>
> > > >>>> > >-do_install() {
> > > >>>>
> > > >>>> > >- CP_ARGS="-Prf --preserve=mode,timestamps --no-
> > > >>>preserve=ownership"
> > > >>>> > >- install -d ${D}${DSPLIB_C66_INSTALL_DIR_RECIPE}
> > > >>>>
> > > >>>> > >- cp ${CP_ARGS} ${S}/*
> > ${D}${DSPLIB_C66_INSTALL_DIR_RECIPE}
> > > >>>>
> > > >>>> > >-}
> > > >>>>
> > > >>>> > >-
> > > >>>>
> > > >>>> > >-ALLOW_EMPTY_${PN} = "1"
> > > >>>>
> > > >>>> > >-FILES_${PN}-dev += "${DSPLIB_C66_INSTALL_DIR_RECIPE}"
> > > >>>>
> > > >>>> > >-
> > > >>>>
> > > >>>> > >-INHIBIT_PACKAGE_STRIP = "1"
> > > >>>>
> > > >>>> > >-INHIBIT_SYSROOT_STRIP = "1"
> > > >>>>
> > > >>>> > >-INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
> > > >>>>
> > > >>>> > >-INSANE_SKIP_${PN}-dev = "arch"
> > > >>>>
> > > >>>> > >diff --git a/recipes-ti/dsplib/dsplib-c66x_3.4.0.0.bb
> > > >>>> b/recipes-ti/dsplib/dsplib-c66x_3.4.0.0.bb
> > > >>>>
> > > >>>> > >deleted file mode 100644
> > > >>>>
> > > >>>> > >index f1273f3..0000000
> > > >>>>
> > > >>>> > >--- a/recipes-ti/dsplib/dsplib-c66x_3.4.0.0.bb
> > > >>>>
> > > >>>> > >+++ /dev/null
> > > >>>>
> > > >>>> > >@@ -1,9 +0,0 @@
> > > >>>>
> > > >>>> > >-require dsplib-c66x.inc
> > > >>>>
> > > >>>> > >-
> > > >>>>
> > > >>>> > >-PV = "3_4_0_0"
> > > >>>>
> > > >>>> > >-PR = "r1"
> > > >>>>
> > > >>>> > >-
> > > >>>>
> > > >>>> > >-LIC_FILES_CHKSUM =
> > > >>>>
> > >
> > >>>"file://packages/ti/dsplib/dsplib.h;beginline=9;endline=35;md5=17733f9e1100f8
> > > >>>a628512f47c4bf676a"
> > > >>>> > >-
> > > >>>>
> > > >>>> > >-SRC_URI[dsplib.md5sum] = "66785604729c153dcad5282097dee8bf"
> > > >>>>
> > > >>>> > >-SRC_URI[dsplib.sha256sum] =
> > > >>>>
> > > >>>"e88909b6271ce6c4c62e2ab90181b7adb36c7f28f5c52836668eb35888785ce8"
> > > >>>> > >diff --git a/recipes-ti/dsplib/dsplib-c66x_git.bb
> > > >>>> b/recipes-ti/dsplib/dsplib-c66x_git.bb
> > > >>>>
> > > >>>> > >new file mode 100644
> > > >>>>
> > > >>>> > >index 0000000..cbc25d0
> > > >>>>
> > > >>>> > >--- /dev/null
> > > >>>>
> > > >>>> > >+++ b/recipes-ti/dsplib/dsplib-c66x_git.bb
> > > >>>>
> > > >>>> > >@@ -0,0 +1,10 @@
> > > >>>>
> > > >>>> > >+MATHLIB_INSTALL_DIR = "${MATHLIB_C66_INSTALL_DIR}/packages"
> > > >>>>
> > > >>>> > >+DSPLIB_INSTALL_DIR_RECIPE =
> > "${DSPLIB_C66_INSTALL_DIR_RECIPE}"
> > > >>>>
> > > >>>> > >+DSPLIB_INSTALL_DIR = "${DSPLIB_C66_INSTALL_DIR}"
> > > >>>>
> > > >>>> > >+DSPLIB_BUILD_TARGET = "c66x"
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+DEPENDS = "mathlib-c66x"
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+include dsplib.inc
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >diff --git a/recipes-ti/dsplib/dsplib-c674x_git.bb
> > > >>>> b/recipes-ti/dsplib/dsplib-c674x_git.bb
> > > >>>>
> > > >>>> > >new file mode 100644
> > > >>>>
> > > >>>> > >index 0000000..07c6892
> > > >>>>
> > > >>>> > >--- /dev/null
> > > >>>>
> > > >>>> > >+++ b/recipes-ti/dsplib/dsplib-c674x_git.bb
> > > >>>>
> > > >>>> > >@@ -0,0 +1,9 @@
> > > >>>>
> > > >>>> > >+MATHLIB_INSTALL_DIR = "${MATHLIB_C674_INSTALL_DIR}/packages"
> > > >>>>
> > > >>>> > >+DSPLIB_INSTALL_DIR_RECIPE =
> > "${DSPLIB_C674_INSTALL_DIR_RECIPE}"
> > > >>>>
> > > >>>> > >+DSPLIB_INSTALL_DIR = "${DSPLIB_C674_INSTALL_DIR}"
> > > >>>>
> > > >>>> > >+DSPLIB_BUILD_TARGET = "c674x"
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+DEPENDS = "mathlib-c674x"
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+include dsplib.inc
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >diff --git a/recipes-ti/dsplib/dsplib.inc
> > > >>>> b/recipes-ti/dsplib/dsplib.inc
> > > >>>>
> > > >>>> > >new file mode 100644
> > > >>>>
> > > >>>> > >index 0000000..66fe0fb
> > > >>>>
> > > >>>> > >--- /dev/null
> > > >>>>
> > > >>>> > >+++ b/recipes-ti/dsplib/dsplib.inc
> > > >>>>
> > > >>>> > >@@ -0,0 +1,79 @@
> > > >>>>
> > > >>>> > >+SUMMARY = "DSPLIB contains optimized signal processing
> > functions for
> > > >>>> TI DSPs"
> > > >>>>
> > > >>>> > >+HOMEPAGE = "http://git.ti.com/ep-processor-libraries/dsplib"
> > > >>>>
> > > >>>> > >+LICENSE = "BSD-3-Clause"
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+require ../includes/ti-paths.inc
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+PV = "3_4_0_1"
> > > >>>>
> > > >>>> > >+PR = "r0"
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+COMPATIBLE_MACHINE = "am57xx-evm|keystone|c66x|omapl1"
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+DEPENDS += "ti-cgt6x-native \
> > > >>>>
> > > >>>> > >+ ti-xdctools-native \
> > > >>>>
> > > >>>> > >+ ti-sysbios \
> > > >>>>
> > > >>>> > >+ doxygen-native \
> > > >>>>
> > > >>>> > >+ zip-native \
> > > >>>>
> > > >>>> > >+ swtools "
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+S = "${WORKDIR}/git"
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+SRC_URI =
> > > >>>> "git://git.ti.com/ep-processor-
> > > >>>libraries/dsplib.git;protocol=git;branch=master"
> > > >>>> > >+SRCREV = "bf5a51cba462c5cb03ed20a6a1bb1bd16c0683e1"
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+LIC_FILES_CHKSUM =
> > > >>>>
> > >
> > >>>"file://ti/dsplib/src/common/c66/lnk.cmd;beginline=1;endline=37;md5=0f0c9c4
> > > >>>d51d8af75419781591ace190b"
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+export DSPLIB_WORK_DIR="${S}"
> > > >>>>
> > > >>>> > >+export CGTOOLS_INSTALL_DIR =
> > > >>>> "${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x"
> > > >>>>
> > > >>>> > >+export C64PCODEGENTOOL="${CGTOOLS_INSTALL_DIR}"
> > > >>>>
> > > >>>> > >+export C674CODEGENTOOL="${CGTOOLS_INSTALL_DIR}"
> > > >>>>
> > > >>>> > >+export C66CODEGENTOOL ="${CGTOOLS_INSTALL_DIR}"
> > > >>>>
> > > >>>> > >+export SWTOOLS_PATH =
> > "${SWTOOLS_INSTALL_DIR}/ti/mas/swtools"
> > > >>>>
> > > >>>> > >+export XDCBUILDCFG="${SWTOOLS_PATH}/config.bld"
> > > >>>>
> > > >>>> > >+export INCDIR="${MATHLIB_INSTALL_DIR}/"
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+PATH_append = ":${XDC_INSTALL_DIR}"
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> >
> > > >>>>
> > > >>>>+XDCPATH.="${XDCCGROOT}/include;${XDC_INSTALL_DIR}/packages;${SYSBI
> > > >>>OS_INSTALL_DIR}/packages;"
> > > >>>> >
> > > >>>>
> > > >>>>+XDCPATH.="${SWTOOLS_INSTALL_DIR};${MATHLIB_INSTALL_DIR};${DSPLIB_
> > > >>>WORK_DIR};"
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+export XDCPATH
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+DSPLIB_PACKAGE_NAME = "dsplib_${DSPLIB_BUILD_TARGET}_${PV}"
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+do_compile() {
> > > >>>>
> > > >>>> > >+ cd ${DSPLIB_WORK_DIR}/ti/dsplib;
> > > >>>>
> > > >>>> > >+ xdc XDCARGS="${DSPLIB_BUILD_TARGET} bundle"
> > XDCOPTIONS="-
> > > >>>v"
> > > >>>> > >+}
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+do_install() {
> > > >>>>
> > > >>>> > >+ install -d ${D}${DSPLIB_INSTALL_DIR_RECIPE}
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+ find -name "${DSPLIB_PACKAGE_NAME}.zip" -exec unzip
> > -o {} -d
> > > >>>> ${D}${DSPLIB_INSTALL_DIR_RECIPE} \;
> > > >>>>
> > > >>>> > >+ mv ${D}${DSPLIB_INSTALL_DIR_RECIPE}/dsplib/*
> > > >>>> ${D}${DSPLIB_INSTALL_DIR_RECIPE}
> > > >>>>
> > > >>>> > >+ mv ${D}${DSPLIB_INSTALL_DIR_RECIPE}/dsplib/.metadata
> > > >>>> ${D}${DSPLIB_INSTALL_DIR_RECIPE}
> > > >>>>
> > > >>>> > >+ rm -r ${D}${DSPLIB_INSTALL_DIR_RECIPE}/dsplib
> > > >>>>
> > > >>>> > >+}
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+inherit deploy
> > > >>>>
> > > >>>> > >+addtask deploy before do_build after do_install
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+do_deploy() {
> > > >>>>
> > > >>>> > >+ install -d ${DEPLOYDIR}
> > > >>>>
> > > >>>> > >+ # zip up files in ${D}${DSPLIB_INSTALL_DIR_RECIPE}
> > > >>>>
> > > >>>> > >+ # and place the zip file in ${DEPLOYDIR}
> > > >>>>
> > > >>>> > >+ mkdir ./${DSPLIB_PACKAGE_NAME}
> > > >>>>
> > > >>>> > >+ cp -r ${D}${DSPLIB_INSTALL_DIR_RECIPE}/*
> > > >>>> ./${DSPLIB_PACKAGE_NAME}
> > > >>>>
> > > >>>> > >+ cp -r ${D}${DSPLIB_INSTALL_DIR_RECIPE}/.metadata
> > > >>>> ./${DSPLIB_PACKAGE_NAME}
> > > >>>>
> > > >>>> > >+ zip -9 -y -r -q
> > ${DEPLOYDIR}/${DSPLIB_PACKAGE_NAME}.zip
> > > >>>> ./${DSPLIB_PACKAGE_NAME}
> > > >>>>
> > > >>>> > >+ rm -r ./${DSPLIB_PACKAGE_NAME}
> > > >>>>
> > > >>>> > >+}
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+PACKAGE_ARCH = "${MACHINE_ARCH}"
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+ALLOW_EMPTY_${PN} = "1"
> > > >>>>
> > > >>>> > >+FILES_${PN}-dev += "${DSPLIB_INSTALL_DIR_RECIPE}"
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >+INSANE_SKIP_${PN}-dev = "arch"
> > > >>>>
> > > >>>> > >+
> > > >>>>
> > > >>>> > >diff --git a/recipes-ti/includes/ti-paths.inc
> > > >>>> b/recipes-ti/includes/ti-paths.inc
> > > >>>>
> > > >>>> > >index 4f99d5e..8740b6a 100644
> > > >>>>
> > > >>>> > >--- a/recipes-ti/includes/ti-paths.inc
> > > >>>>
> > > >>>> > >+++ b/recipes-ti/includes/ti-paths.inc
> > > >>>>
> > > >>>> > >@@ -17,6 +17,7 @@ export DMAI_INSTALL_DIR_RECIPE =
> > > >>>> "${installdir}/ti-dmai-tree"
> > > >>>>
> > > >>>> > > export DSP_BENCHMARK_INSTALL_DIR_RECIPE =
> > > >>>> "${installdir}/ti-dsp-benchmark-tree"
> > > >>>>
> > > >>>> > > export DSPLIB_C64P_INSTALL_DIR_RECIPE =
> > > >>>> "${installdir}/ti-dsplib-c64p-tree"
> > > >>>>
> > > >>>> > > export DSPLIB_C674_INSTALL_DIR_RECIPE =
> > > >>>> "${installdir}/ti-dsplib-c674x-tree"
> > > >>>>
> > > >>>> > >+export DSPLIB_C66_INSTALL_DIR_RECIPE =
> > > >>>> "${installdir}/ti-dsplib-c66x-tree"
> > > >>>>
> > > >>>> > > export DSPLIB_INSTALL_DIR_RECIPE =
> > "${installdir}/ti-dsplib-tree"
> > > >>>>
> > > >>>> > > export DVSDK_DEMOS_INSTALL_DIR_RECIPE=
> > > >>>> "${installdir}/ti-dvsdk-demos-tree"
> > > >>>>
> > > >>>> > > export DVTB_INSTALL_DIR_RECIPE =
> > "${installdir}/ti-dvtb-tree"
> > > >>>>
> > > >>>> > >@@ -39,6 +40,7 @@ export OSAL_INSTALL_DIR_RECIPE =
> > > >>>> "${installdir}/ti-osal-tree"
> > > >>>>
> > > >>>> > > export RTFS_INSTALL_DIR_RECIPE =
> > "${installdir}/ti-rtfs-tree"
> > > >>>>
> > > >>>> > > export SYSBIOS_INSTALL_DIR_RECIPE =
> > > >>>> "${installdir}/ti-sysbios-tree"
> > > >>>>
> > > >>>> > > export SYSLINK_INSTALL_DIR_RECIPE =
> > > >>>> "${installdir}/ti-syslink-tree"
> > > >>>>
> > > >>>> > >+export SWTOOLS_INSTALL_DIR_RECIPE =
> > "${installdir}/ti-swtools-tree"
> > > >>>>
> > > >>>> > > export UIA_INSTALL_DIR_RECIPE =
> > "${installdir}/ti-uia-tree"
> > > >>>>
> > > >>>> > > export VICPLIB_INSTALL_DIR_RECIPE =
> > > >>>> "${installdir}/ti-vicplib-tree"
> > > >>>>
> > > >>>> > > export XDAIS_INSTALL_DIR_RECIPE =
> > "${installdir}/ti-xdais-tree"
> > > >>>>
> > > >>>> > >@@ -48,8 +50,8 @@ export OSAL_INSTALL_DIR_RECIPE =
> > > >>>> "${installdir}/ti-osal-tree"
> > > >>>>
> > > >>>> > > export M4_TOOLCHAIN_INSTALL_DIR_RECIPE =
> > > >>>> "${installdir}/ti-cgt-arm"
> > > >>>>
> > > >>>> > > export GCC_ARM_NONE_TOOLCHAIN_RECIPE =
> > > >>>> "${installdir}/gcc-arm-none-eabi"
> > > >>>>
> > > >>>> > > export TI_CGT_PRU_INSTALL_DIR_RECIPE =
> > "${installdir}/cgt-pru"
> > > >>>>
> > > >>>> > >-export DSPLIB_C66_INSTALL_DIR_RECIPE =
> > > >>>> "${installdir}/ti-dsplib-c66x-tree"
> > > >>>>
> > > >>>> > > export MATHLIB_C66_INSTALL_DIR_RECIPE =
> > > >>>> "${installdir}/ti-mathlib-c66x-tree"
> > > >>>>
> > > >>>> > >+export MATHLIB_C674_INSTALL_DIR_RECIPE =
> > > >>>> "${installdir}/ti-mathlib-c674x-tree"
> > > >>>>
> > > >>>> > > export IMGLIB_C66_INSTALL_DIR_RECIPE =
> > > >>>> "${installdir}/ti-imglib-c66x-tree"
> > > >>>>
> > > >>>> > > export VLIB_C66_INSTALL_DIR_RECIPE =
> > > >>>> "${installdir}/ti-vlib-c66x-tree"
> > > >>>>
> > > >>>> > > export CG_XML_INSTALL_DIR_RECIPE =
> > "${installdir}/ti-cg-xml-tree"
> > > >>>>
> > > >>>> > >@@ -95,7 +97,11 @@ export OSAL_INSTALL_DIR =
> > > >>>> "${STAGING_DIR_TARGET}${OSAL_INSTALL_DIR_RECIPE}
> > > >>>>
> > > >>>> > > export M4_TOOLCHAIN_INSTALL_DIR =
> > > >>>> "${STAGING_DIR_NATIVE}${M4_TOOLCHAIN_INSTALL_DIR_RECIPE}"
> > > >>>>
> > > >>>> > > export GCC_ARM_NONE_TOOLCHAIN =
> > > >>>> "${STAGING_DIR_NATIVE}${GCC_ARM_NONE_TOOLCHAIN_RECIPE}"
> > > >>>>
> > > >>>> > > export TI_CGT_PRU_INSTALL_DIR =
> > > >>>> "${STAGING_DIR_NATIVE}${TI_CGT_PRU_INSTALL_DIR_RECIPE}"
> > > >>>>
> > > >>>> > >+export SWTOOLS_INSTALL_DIR =
> > > >>>> "${STAGING_DIR_TARGET}${SWTOOLS_INSTALL_DIR_RECIPE}"
> > > >>>>
> > > >>>> > >+export DSPLIB_C64P_INSTALL_DIR =
> > > >>>> "${STAGING_DIR_TARGET}${DSPLIB_C64P_INSTALL_DIR_RECIPE}"
> > > >>>>
> > > >>>> > >+export DSPLIB_C674_INSTALL_DIR =
> > > >>>> "${STAGING_DIR_TARGET}${DSPLIB_C674_INSTALL_DIR_RECIPE}"
> > > >>>>
> > > >>>> > > export DSPLIB_C66_INSTALL_DIR =
> > > >>>> "${STAGING_DIR_TARGET}${DSPLIB_C66_INSTALL_DIR_RECIPE}"
> > > >>>>
> > > >>>> > >+export MATHLIB_C674_INSTALL_DIR =
> > > >>>> "${STAGING_DIR_TARGET}${MATHLIB_C674_INSTALL_DIR_RECIPE}"
> > > >>>>
> > > >>>> > > export MATHLIB_C66_INSTALL_DIR =
> > > >>>> "${STAGING_DIR_TARGET}${MATHLIB_C66_INSTALL_DIR_RECIPE}"
> > > >>>>
> > > >>>> > > export IMGLIB_C66_INSTALL_DIR =
> > > >>>> "${STAGING_DIR_TARGET}${IMGLIB_C66_INSTALL_DIR_RECIPE}"
> > > >>>>
> > > >>>> > > export VLIB_C66_INSTALL_DIR =
> > > >>>> "${STAGING_DIR_TARGET}${VLIB_C66_INSTALL_DIR_RECIPE}"
> > > >>>>
> > > >>>> >
> > > >>>>
> > > >>>> > --
> > > >>>>
> > > >>>> > _______________________________________________
> > > >>>>
> > > >>>> > meta-ti mailing list
> > > >>>>
> > > >>>> > meta-ti@yoctoproject.org
> > > >>>>
> > > >>>> > https://lists.yoctoproject.org/listinfo/meta-ti
> > >
> --
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
next prev parent reply other threads:[~2018-09-13 18:36 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-06 17:46 [PATCH 3/3 v2] Added DSPLIB recipe to build DSPLIB from source. Updated includes/ti-paths.inc for MATHLIB and DSPLIB Jianzhong Xu
2018-09-11 13:17 ` [EXTERNAL] " Jacob Stiffler
2018-09-12 19:13 ` Denys Dmytriyenko
2018-09-12 19:36 ` Jacob Stiffler
2018-09-12 19:40 ` Xu, Jianzhong
2018-09-12 20:20 ` Denys Dmytriyenko
2018-09-12 20:37 ` Dmytriyenko, Denys
2018-09-12 21:06 ` Xu, Jianzhong
2018-09-12 22:52 ` Denys Dmytriyenko
2018-09-13 11:26 ` Jacob Stiffler
2018-09-13 15:24 ` Xu, Jianzhong
2018-09-13 15:25 ` Denys Dmytriyenko
2018-09-13 15:26 ` Denys Dmytriyenko
2018-09-13 15:44 ` Xu, Jianzhong
2018-09-13 16:01 ` Stiffler, Jacob
2018-09-13 16:34 ` Denys Dmytriyenko
2018-09-13 18:35 ` Denys Dmytriyenko [this message]
2018-09-13 21:20 ` Xu, Jianzhong
2018-09-13 21:38 ` Denys Dmytriyenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180913183520.GI12296@beryl \
--to=denys@ti.com \
--cc=j-stiffler@ti.com \
--cc=meta-ti@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.