From: jic23@kernel.org
To: gregkh@linuxfoundation.org, linux-iio@vger.kernel.org
Subject: [PULL] First set of IIO new device support, features and cleanups for the 4.20 cycle.
Date: Thu, 13 Sep 2018 20:55:10 +0100 [thread overview]
Message-ID: <20180913205302.2a299be1@archlinux> (raw)
The following changes since commit 156c3df8d4db4e693c062978186f44079413d74d:
staging: erofs: disable compiling temporarile (2018-08-02 12:15:44 +0200)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-4.20a
for you to fetch changes up to daae7861a696b66acb3547c1cb9247cb3abaf0b3:
iio: light: bh1750: simplify setting PM ops (2018-09-08 16:01:40 +0100)
----------------------------------------------------------------
1st round of IIO new device support, features and cleanups in the 4.20 cycle.
There is a merge commit in here to pull in regmap support for repeatedly
reading the same register (to read out FIFOs). Used by the adxl372 driver.
This will find uses elsewhere once we tidy up various drivers that are
effectively doing this and relying on not enabling regcache.
New device support
* Analog devices ADXL372 accelerometer
- new driver for this accelerometer including fifo and and interrupt support.
Follow up patches enforce trigger validation, add sampling frequency
control and filter bandwidth control. A later series added i2c support
to the existing SPI support.
* ST lsm6dsx
- rework and add support fo the LSM6DSO 6 axis mems sensor.
* Linear LTC 1660 DAC
- new driver supporting the LTC 1660 and LTC 1665 SPI DACs.
* Microchip mcp3911 ADC.
- new driver for this integrated analog front end and ADC.
* Qualcomm SPMI PMIC5 adc driver
- using the spmi framework, new driver and bindings for this ADC.
Follow up patch adds some missing channels.
Features
* ad5758
- support hard reset using a gpio (if provided).
* mpu6050
- Regulator support
* qcom-spmi-adc5
- Sanity check the channel numbers provided by DT to make sure the
driver actually knows about them.
* sc27xx
- give raw data for channel 20 as it's used on all known boards for
the headset which needs a custom converstion function. If it turns
out someone builds a board where this isn't true we will deal with it
when it happens.
- add ADC scale calibration.
* tsl2772
- support device tree binding to set the proximity led settings.
- regulator supprot.
- binding for apds9930 - trivial addition as register compatible with tsl2772.
Cleanups / Minor fixes
* adxl345
- supress a static checker warning but explicitly checking if the id
object is null.
* bh1750
- avoid CONFIG_PM_SLEEP checks.
- SPDX.
* bme680
- spelling mistake
- use clamp rather than open coding.
- white space and other similar fixes.
- rename MSK to MASK for clarifty and use GENMASK to specify them.
- use the FIELD_GET macro rather than a very odd accessor of dividing by
16 to get the shift.
- rework to share handing for oversampling of the various channels in a
unified way.
- check explicitly for val2 in write_raw function to ensure it is 0.
- drop some field defines that don't add anything.
* dpot-adc
- SPDX
* envelope detector
- SPDX
* isl29501
- fix an ancient compiler warning mostly because it results in much
nicer code.
* max30102
- mark switch fall throughs.
* max44000
- drop an unused variable.
* max512
- avoid CONFIG_PM_SLEEP checks.
* max5481
- use of_device_get_match_data rather than open coding it.
* max5821
- avoid CONFIG_PM_SLEEP checks.
* max9611
- explicity cast an enum to an integer to make it totally clear that
this is intended.
* mcp4018
- fix an inconsistent MODULE_LICENSE.
- use of_device_get_match_data rather than open coding it.
* mcp4531
- use of_device_get_match_data rather than open coding it.
- SPDX
* mcp4725
- avoid CONFIG_PM_SLEEP checks.
* mcp4922
- Fix error handling and prevent writing a negative to when setting the
output voltage.
* ms5611
- drop deprecated compatible strings without manufacturer from being
explicitly listed. They are handled anyway.
- SPDX
* multiplexer
- SPDX
* qcom-vadc
- fix inconsistent documentation for reg.
* ti-dac5571
- provide and of_match_table.
* treewide
- update Michael Hennerich's email address.
- Use %pOFn rather than device_node.name.
* documentation.
- tidy up a wrong kernel version for the introduction of the
position_relative ABI.
----------------------------------------------------------------
Alexandru Ardelean (1):
iio: adxl345: move null check for i2c id at start of probe
Baolin Wang (2):
iio: adc: sc27xx: Add raw data support
iio: adc: sc27xx: Add ADC scale calibration
Brian Masney (6):
iio: imu: mpu6050: add support for regulator framework
dt-bindings: iio: tsl2772: add new bindings
iio: tsl2772: add support for reading proximity led settings from device tree
dt-bindings: iio: tsl2772: add binding for avago,apds9930
iio: tsl2772: add support for avago,apds9930
iio: tsl2772: add support for regulator framework
Colin Ian King (2):
iio: chemical: fix spelling mistake "failted" -> "failed"
iio: max44000: remove unused variable max44000_alstim_shift
Crestez Dan Leonard (1):
regmap: Add regmap_noinc_read API
David Frey (8):
iio: chemical: bme680: use clamp macro
iio: chemical: bme680: cleanup bme680_read_calib formatting
iio: chemical: bme680: indent #defines consistently
iio: chemical: bme680: change MSK->MASK in #defines
iio: chemical: bme680: use GENMASK macro
iio: chemical: bme680: use FIELD_GET macro
iio: chemical: bme680: simplify oversampling handling
iio: chemical: bme680: Remove field value defines
Eugen Hristev (1):
iio: fix position relative kernel version
Geert Uytterhoeven (1):
iio: light: isl29501: Simplify code to kill compiler warning
Gustavo A. R. Silva (1):
iio: health: max30102: Mark expected switch fall-throughs
Himanshu Jha (1):
iio: chemical: bme680: Add check for val2 in the write_raw function
Jonathan Cameron (1):
Merge tag 'regmap-noinc-read' into togreg
Julia Lawall (1):
iio: potentiometer: merge calls to of_match_device and of_device_get_match_data
Lorenzo Bianconi (5):
iio: imu: st_lsm6dsx: add read_fifo callback to fifo_ops
iio: imu: st_lsm6dsx: make st_lsm6dsx_check_odr() non-static
iio: imu: st_lsm6dsx: add addr/max_word_len to st_lsm6dsx_read_block()
iio: imu: st_lsm6dsx: add support to LSM6DSO
dt-bindings: iio: imu: st_lsm6dsx: add LSM6DSO device bindings
Marcus Folkesson (11):
iio: dac: max517: avoid using CONFIG_PM_SLEEP
iio: dac: max5821: avoid using CONFIG_PM_SLEEP
iio: dac: mcp4725: avoid using CONFIG_PM_SLEEP
iio: adc: add support for mcp3911
dt-bindings: iio: adc: add bindings for mcp3911
MAINTAINERS: Add entry for mcp3911 ADC driver
iio: dac: add support for ltc1660
dt-bindings: iio: dac: add bindings for ltc1660
MAINTAINERS: add entry for ltc1660 DAC driver
iio: dac: mcp4922: fix error handling in mcp4922_write_raw
iio: dac: ti-dac5571: provide of_match_table to driver
Matthias Kaehlcke (3):
iio: adc: qcom-spmi-adc5: Add ADC5_AMUX_THM[24]_100K_PU to rev2 channel list
iio: adc: qcom-spmi-adc5: Verify channel numbers from DT
dt-bindings: iio: vadc: Fix documentation of 'reg'
Michael Hennerich (1):
drivers: iio: Update MODULE AUTHOR email address
Peter Rosin (5):
iio: potentiometer: mcp4018: use the correct MODULE_LICENSE
iio: potentiometer: mcp4531: switch to SPDX license identifier
iio: envelope-detector: switch to SPDX license identifier
iio: dpot-dac: switch to SPDX license identifier
iio: multiplexer: switch to SPDX license identifier
Rob Herring (1):
iio: Convert to using %pOFn instead of device_node.name
Siddartha Mohanadoss (3):
dt-bindings: iio: adc: Add DT binding document for PMIC5 ADC
iio: adc: Add QCOM SPMI PMIC5 ADC driver
iio: adc: Update QCOM ADC license to SPDX format
Stefan Agner (1):
iio: adc: max9611: explicitly cast gain_selectors
Stefan Popa (10):
iio: adxl372: New driver for Analog Devices ADXL372 Accelerometer
dt-bindings: iio: accel: Add docs for ADXL372
iio:adxl372: Add FIFO and interrupts support
iio: adxl372: Provide validate_trigger and validate_device callbacks
iio:adxl372: Add sampling frequency support
iio:adxl372: Add filter bandwidth support
iio: dac: ad5758: Add support for hard reset
iio: adxl372: Refactor the driver
iio: adxl372: Add support for I2C communication
dt-bindings: adxl372: Document the adxl372 I2C bindings
Tomasz Duszynski (4):
iio: pressure: ms5611: remove deprecated compatible strings
iio: light: bh1750: switch to SPDX identifier
iio: pressure: ms5611: switch to SPDX identifier
iio: light: bh1750: simplify setting PM ops
Documentation/ABI/testing/sysfs-bus-iio | 2 +-
.../devicetree/bindings/iio/accel/adxl372.txt | 33 +
.../devicetree/bindings/iio/adc/mcp3911.txt | 30 +
.../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 81 +-
.../bindings/iio/adc/sprd,sc27xx-adc.txt | 4 +
.../devicetree/bindings/iio/dac/ad5758.txt | 5 +
.../devicetree/bindings/iio/dac/ltc1660.txt | 21 +
.../devicetree/bindings/iio/imu/inv_mpu6050.txt | 1 +
.../devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 +
.../devicetree/bindings/iio/light/tsl2772.txt | 42 +
.../devicetree/bindings/trivial-devices.txt | 10 -
MAINTAINERS | 24 +
drivers/base/regmap/internal.h | 3 +
drivers/base/regmap/regmap.c | 79 +-
drivers/iio/accel/Kconfig | 27 +
drivers/iio/accel/Makefile | 3 +
drivers/iio/accel/adxl345_i2c.c | 5 +-
drivers/iio/accel/adxl372.c | 975 +++++++++++++++++++++
drivers/iio/accel/adxl372.h | 17 +
drivers/iio/accel/adxl372_i2c.c | 61 ++
drivers/iio/accel/adxl372_spi.c | 52 ++
drivers/iio/adc/Kconfig | 30 +
drivers/iio/adc/Makefile | 2 +
drivers/iio/adc/ad7298.c | 2 +-
drivers/iio/adc/ad7476.c | 2 +-
drivers/iio/adc/ad7793.c | 2 +-
drivers/iio/adc/ad7887.c | 2 +-
drivers/iio/adc/ad7923.c | 2 +-
drivers/iio/adc/ad799x.c | 2 +-
drivers/iio/adc/envelope-detector.c | 5 +-
drivers/iio/adc/max9611.c | 2 +-
drivers/iio/adc/mcp3911.c | 363 ++++++++
drivers/iio/adc/qcom-pm8xxx-xoadc.c | 4 +-
drivers/iio/adc/qcom-spmi-adc5.c | 793 +++++++++++++++++
drivers/iio/adc/qcom-vadc-common.c | 189 +++-
drivers/iio/adc/qcom-vadc-common.h | 54 ++
drivers/iio/adc/rcar-gyroadc.c | 12 +-
drivers/iio/adc/sc27xx_adc.c | 154 +++-
drivers/iio/amplifiers/ad8366.c | 2 +-
drivers/iio/chemical/bme680.h | 19 +-
drivers/iio/chemical/bme680_core.c | 154 ++--
drivers/iio/dac/Kconfig | 10 +
drivers/iio/dac/Makefile | 1 +
drivers/iio/dac/ad5446.c | 2 +-
drivers/iio/dac/ad5504.c | 2 +-
drivers/iio/dac/ad5686.c | 2 +-
drivers/iio/dac/ad5758.c | 26 +-
drivers/iio/dac/ad5791.c | 2 +-
drivers/iio/dac/dpot-dac.c | 5 +-
drivers/iio/dac/ltc1660.c | 250 ++++++
drivers/iio/dac/max517.c | 11 +-
drivers/iio/dac/max5821.c | 11 +-
drivers/iio/dac/mcp4725.c | 12 +-
drivers/iio/dac/mcp4922.c | 11 +-
drivers/iio/dac/ti-dac5571.c | 1 +
drivers/iio/frequency/ad9523.c | 2 +-
drivers/iio/frequency/adf4350.c | 2 +-
drivers/iio/health/max30102.c | 6 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 62 ++
drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 2 +
drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 18 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 166 +++-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 51 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +
drivers/iio/light/bh1750.c | 14 +-
drivers/iio/light/max44000.c | 1 -
drivers/iio/light/tsl2772.c | 194 +++-
drivers/iio/multiplexer/iio-mux.c | 5 +-
drivers/iio/potentiometer/max5481.c | 7 +-
drivers/iio/potentiometer/mcp4018.c | 9 +-
drivers/iio/potentiometer/mcp4531.c | 14 +-
drivers/iio/pressure/ms5611.h | 5 +-
drivers/iio/pressure/ms5611_core.c | 5 +-
drivers/iio/pressure/ms5611_i2c.c | 7 +-
drivers/iio/pressure/ms5611_spi.c | 7 +-
drivers/iio/proximity/isl29501.c | 12 +-
drivers/iio/trigger/iio-trig-sysfs.c | 2 +-
drivers/staging/iio/adc/ad7192.c | 2 +-
drivers/staging/iio/adc/ad7280a.c | 2 +-
drivers/staging/iio/adc/ad7606.c | 2 +-
drivers/staging/iio/adc/ad7606_par.c | 2 +-
drivers/staging/iio/adc/ad7606_spi.c | 2 +-
drivers/staging/iio/adc/ad7780.c | 2 +-
drivers/staging/iio/cdc/ad7746.c | 2 +-
drivers/staging/iio/frequency/ad9832.c | 2 +-
drivers/staging/iio/frequency/ad9834.c | 2 +-
drivers/staging/iio/impedance-analyzer/ad5933.c | 2 +-
include/dt-bindings/iio/qcom,spmi-vadc.h | 125 ++-
include/linux/regmap.h | 19 +
91 files changed, 4027 insertions(+), 357 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/accel/adxl372.txt
create mode 100644 Documentation/devicetree/bindings/iio/adc/mcp3911.txt
create mode 100644 Documentation/devicetree/bindings/iio/dac/ltc1660.txt
create mode 100644 Documentation/devicetree/bindings/iio/light/tsl2772.txt
create mode 100644 drivers/iio/accel/adxl372.c
create mode 100644 drivers/iio/accel/adxl372.h
create mode 100644 drivers/iio/accel/adxl372_i2c.c
create mode 100644 drivers/iio/accel/adxl372_spi.c
create mode 100644 drivers/iio/adc/mcp3911.c
create mode 100644 drivers/iio/adc/qcom-spmi-adc5.c
create mode 100644 drivers/iio/dac/ltc1660.c
next reply other threads:[~2018-09-14 1:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-13 19:55 jic23 [this message]
2018-09-14 8:41 ` [PULL] First set of IIO new device support, features and cleanups for the 4.20 cycle Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180913205302.2a299be1@archlinux \
--to=jic23@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.