From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Subject: [PATCH 3/8] staging: rtl8188eu: remove whitespace
Date: Fri, 14 Sep 2018 17:11:37 +0200 [thread overview]
Message-ID: <20180914151142.1179-3-straube.linux@gmail.com> (raw)
In-Reply-To: <20180914151142.1179-1-straube.linux@gmail.com>
Replace tabs with spaces or just remove spaces in declarations.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
.../staging/rtl8188eu/core/rtw_ioctl_set.c | 34 +++++++++----------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/staging/rtl8188eu/core/rtw_ioctl_set.c b/drivers/staging/rtl8188eu/core/rtw_ioctl_set.c
index 9b67f33cb568..a00272540846 100644
--- a/drivers/staging/rtl8188eu/core/rtw_ioctl_set.c
+++ b/drivers/staging/rtl8188eu/core/rtw_ioctl_set.c
@@ -17,8 +17,8 @@ u8 rtw_do_join(struct adapter *padapter)
{
struct list_head *plist, *phead;
u8 *pibss = NULL;
- struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
- struct __queue *queue = &pmlmepriv->scanned_queue;
+ struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
+ struct __queue *queue = &pmlmepriv->scanned_queue;
u8 ret = _SUCCESS;
spin_lock_bh(&pmlmepriv->scanned_queue.lock);
@@ -308,8 +308,8 @@ u8 rtw_set_802_11_ssid(struct adapter *padapter, struct ndis_802_11_ssid *ssid)
u8 rtw_set_802_11_infrastructure_mode(struct adapter *padapter,
enum ndis_802_11_network_infra networktype)
{
- struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
- struct wlan_network *cur_network = &pmlmepriv->cur_network;
+ struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
+ struct wlan_network *cur_network = &pmlmepriv->cur_network;
enum ndis_802_11_network_infra *pold_state = &cur_network->network.InfrastructureMode;
RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_notice_,
@@ -394,8 +394,8 @@ u8 rtw_set_802_11_disassociate(struct adapter *padapter)
u8 rtw_set_802_11_bssid_list_scan(struct adapter *padapter, struct ndis_802_11_ssid *pssid, int ssid_max_num)
{
- struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
- u8 res = true;
+ struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
+ u8 res = true;
RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_, ("+%s(), fw_state =%x\n", __func__, get_fwstate(pmlmepriv)));
@@ -467,9 +467,9 @@ u8 rtw_set_802_11_authentication_mode(struct adapter *padapter, enum ndis_802_11
u8 rtw_set_802_11_add_wep(struct adapter *padapter, struct ndis_802_11_wep *wep)
{
- int keyid, res;
+ int keyid, res;
struct security_priv *psecuritypriv = &padapter->securitypriv;
- u8 ret = _SUCCESS;
+ u8 ret = _SUCCESS;
keyid = wep->KeyIndex & 0x3fffffff;
@@ -535,16 +535,16 @@ u8 rtw_set_802_11_add_wep(struct adapter *padapter, struct ndis_802_11_wep *wep)
*/
u16 rtw_get_cur_max_rate(struct adapter *adapter)
{
- int i = 0;
- u8 *p;
- u16 rate = 0, max_rate = 0;
- struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv;
- struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
+ int i = 0;
+ u8 *p;
+ u16 rate = 0, max_rate = 0;
+ struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv;
+ struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
struct registry_priv *pregistrypriv = &adapter->registrypriv;
- struct mlme_priv *pmlmepriv = &adapter->mlmepriv;
- struct wlan_bssid_ex *pcur_bss = &pmlmepriv->cur_network.network;
- u8 bw_40MHz = 0, short_GI_20 = 0, short_GI_40 = 0;
- u32 ht_ielen = 0;
+ struct mlme_priv *pmlmepriv = &adapter->mlmepriv;
+ struct wlan_bssid_ex *pcur_bss = &pmlmepriv->cur_network.network;
+ u8 bw_40MHz = 0, short_GI_20 = 0, short_GI_40 = 0;
+ u32 ht_ielen = 0;
if (!check_fwstate(pmlmepriv, _FW_LINKED) &&
!check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE))
--
2.19.0
next prev parent reply other threads:[~2018-09-14 15:12 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-14 15:11 [PATCH 1/8] staging: rtl8188eu: simplify calculation Michael Straube
2018-09-14 15:11 ` [PATCH 2/8] staging: rtl8188eu: remove unnecessary parentheses Michael Straube
2018-09-14 15:11 ` Michael Straube [this message]
2018-09-14 15:11 ` [PATCH 4/8] staging: rtl8188eu: fix comparsions to true Michael Straube
2018-09-14 15:11 ` [PATCH 5/8] staging: rtl8188eu: fix comparsions to false Michael Straube
2018-09-14 15:11 ` [PATCH 6/8] staging: rtl8188eu: add missing spaces around operators Michael Straube
2018-09-14 15:11 ` [PATCH 7/8] staging: rtl8188eu: fix lines over 80 characters Michael Straube
2018-09-14 15:11 ` [PATCH 8/8] staging: rtl8188eu: simplify function comments Michael Straube
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180914151142.1179-3-straube.linux@gmail.com \
--to=straube.linux@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.