From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>, Jason Gunthorpe <jgg@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>,
RDMA mailing list <linux-rdma@vger.kernel.org>,
Yishai Hadas <yishaih@mellanox.com>,
Saeed Mahameed <saeedm@mellanox.com>,
linux-netdev <netdev@vger.kernel.org>
Subject: [PATCH mlx5-next 02/25] net/mlx5: Set uid as part of QP commands
Date: Mon, 17 Sep 2018 14:03:55 +0300 [thread overview]
Message-ID: <20180917110418.18937-3-leon@kernel.org> (raw)
In-Reply-To: <20180917110418.18937-1-leon@kernel.org>
From: Yishai Hadas <yishaih@mellanox.com>
Set uid as part of QP commands so that the firmware can manage the
QP object in a secured way.
That will enable using a QP that was created by verbs application to
be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/qp.c | 45 +++++++++++++++++-----------
include/linux/mlx5/mlx5_ifc.h | 22 +++++++-------
include/linux/mlx5/qp.h | 1 +
3 files changed, 39 insertions(+), 29 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/qp.c b/drivers/net/ethernet/mellanox/mlx5/core/qp.c
index 4ca07bfb6b14..04f72a1cdbcc 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/qp.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/qp.c
@@ -240,6 +240,7 @@ int mlx5_core_create_qp(struct mlx5_core_dev *dev,
if (err)
return err;
+ qp->uid = MLX5_GET(create_qp_in, in, uid);
qp->qpn = MLX5_GET(create_qp_out, out, qpn);
mlx5_core_dbg(dev, "qpn = 0x%x\n", qp->qpn);
@@ -261,6 +262,7 @@ int mlx5_core_create_qp(struct mlx5_core_dev *dev,
memset(dout, 0, sizeof(dout));
MLX5_SET(destroy_qp_in, din, opcode, MLX5_CMD_OP_DESTROY_QP);
MLX5_SET(destroy_qp_in, din, qpn, qp->qpn);
+ MLX5_SET(destroy_qp_in, din, uid, qp->uid);
mlx5_cmd_exec(dev, din, sizeof(din), dout, sizeof(dout));
return err;
}
@@ -320,6 +322,7 @@ int mlx5_core_destroy_qp(struct mlx5_core_dev *dev,
MLX5_SET(destroy_qp_in, in, opcode, MLX5_CMD_OP_DESTROY_QP);
MLX5_SET(destroy_qp_in, in, qpn, qp->qpn);
+ MLX5_SET(destroy_qp_in, in, uid, qp->uid);
err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
if (err)
return err;
@@ -373,7 +376,7 @@ static void mbox_free(struct mbox_info *mbox)
static int modify_qp_mbox_alloc(struct mlx5_core_dev *dev, u16 opcode, int qpn,
u32 opt_param_mask, void *qpc,
- struct mbox_info *mbox)
+ struct mbox_info *mbox, u16 uid)
{
mbox->out = NULL;
mbox->in = NULL;
@@ -381,26 +384,32 @@ static int modify_qp_mbox_alloc(struct mlx5_core_dev *dev, u16 opcode, int qpn,
#define MBOX_ALLOC(mbox, typ) \
mbox_alloc(mbox, MLX5_ST_SZ_BYTES(typ##_in), MLX5_ST_SZ_BYTES(typ##_out))
-#define MOD_QP_IN_SET(typ, in, _opcode, _qpn) \
- MLX5_SET(typ##_in, in, opcode, _opcode); \
- MLX5_SET(typ##_in, in, qpn, _qpn)
-
-#define MOD_QP_IN_SET_QPC(typ, in, _opcode, _qpn, _opt_p, _qpc) \
- MOD_QP_IN_SET(typ, in, _opcode, _qpn); \
- MLX5_SET(typ##_in, in, opt_param_mask, _opt_p); \
- memcpy(MLX5_ADDR_OF(typ##_in, in, qpc), _qpc, MLX5_ST_SZ_BYTES(qpc))
+#define MOD_QP_IN_SET(typ, in, _opcode, _qpn, _uid) \
+ do { \
+ MLX5_SET(typ##_in, in, opcode, _opcode); \
+ MLX5_SET(typ##_in, in, qpn, _qpn); \
+ MLX5_SET(typ##_in, in, uid, _uid); \
+ } while (0)
+
+#define MOD_QP_IN_SET_QPC(typ, in, _opcode, _qpn, _opt_p, _qpc, _uid) \
+ do { \
+ MOD_QP_IN_SET(typ, in, _opcode, _qpn, _uid); \
+ MLX5_SET(typ##_in, in, opt_param_mask, _opt_p); \
+ memcpy(MLX5_ADDR_OF(typ##_in, in, qpc), \
+ _qpc, MLX5_ST_SZ_BYTES(qpc)); \
+ } while (0)
switch (opcode) {
/* 2RST & 2ERR */
case MLX5_CMD_OP_2RST_QP:
if (MBOX_ALLOC(mbox, qp_2rst))
return -ENOMEM;
- MOD_QP_IN_SET(qp_2rst, mbox->in, opcode, qpn);
+ MOD_QP_IN_SET(qp_2rst, mbox->in, opcode, qpn, uid);
break;
case MLX5_CMD_OP_2ERR_QP:
if (MBOX_ALLOC(mbox, qp_2err))
return -ENOMEM;
- MOD_QP_IN_SET(qp_2err, mbox->in, opcode, qpn);
+ MOD_QP_IN_SET(qp_2err, mbox->in, opcode, qpn, uid);
break;
/* MODIFY with QPC */
@@ -408,37 +417,37 @@ static int modify_qp_mbox_alloc(struct mlx5_core_dev *dev, u16 opcode, int qpn,
if (MBOX_ALLOC(mbox, rst2init_qp))
return -ENOMEM;
MOD_QP_IN_SET_QPC(rst2init_qp, mbox->in, opcode, qpn,
- opt_param_mask, qpc);
+ opt_param_mask, qpc, uid);
break;
case MLX5_CMD_OP_INIT2RTR_QP:
if (MBOX_ALLOC(mbox, init2rtr_qp))
return -ENOMEM;
MOD_QP_IN_SET_QPC(init2rtr_qp, mbox->in, opcode, qpn,
- opt_param_mask, qpc);
+ opt_param_mask, qpc, uid);
break;
case MLX5_CMD_OP_RTR2RTS_QP:
if (MBOX_ALLOC(mbox, rtr2rts_qp))
return -ENOMEM;
MOD_QP_IN_SET_QPC(rtr2rts_qp, mbox->in, opcode, qpn,
- opt_param_mask, qpc);
+ opt_param_mask, qpc, uid);
break;
case MLX5_CMD_OP_RTS2RTS_QP:
if (MBOX_ALLOC(mbox, rts2rts_qp))
return -ENOMEM;
MOD_QP_IN_SET_QPC(rts2rts_qp, mbox->in, opcode, qpn,
- opt_param_mask, qpc);
+ opt_param_mask, qpc, uid);
break;
case MLX5_CMD_OP_SQERR2RTS_QP:
if (MBOX_ALLOC(mbox, sqerr2rts_qp))
return -ENOMEM;
MOD_QP_IN_SET_QPC(sqerr2rts_qp, mbox->in, opcode, qpn,
- opt_param_mask, qpc);
+ opt_param_mask, qpc, uid);
break;
case MLX5_CMD_OP_INIT2INIT_QP:
if (MBOX_ALLOC(mbox, init2init_qp))
return -ENOMEM;
MOD_QP_IN_SET_QPC(init2init_qp, mbox->in, opcode, qpn,
- opt_param_mask, qpc);
+ opt_param_mask, qpc, uid);
break;
default:
mlx5_core_err(dev, "Unknown transition for modify QP: OP(0x%x) QPN(0x%x)\n",
@@ -456,7 +465,7 @@ int mlx5_core_qp_modify(struct mlx5_core_dev *dev, u16 opcode,
int err;
err = modify_qp_mbox_alloc(dev, opcode, qp->qpn,
- opt_param_mask, qpc, &mbox);
+ opt_param_mask, qpc, &mbox, qp->uid);
if (err)
return err;
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index e62a0825d35c..e5a0d3ecfaad 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -3395,7 +3395,7 @@ struct mlx5_ifc_sqerr2rts_qp_out_bits {
struct mlx5_ifc_sqerr2rts_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -3425,7 +3425,7 @@ struct mlx5_ifc_sqd2rts_qp_out_bits {
struct mlx5_ifc_sqd2rts_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -3630,7 +3630,7 @@ struct mlx5_ifc_rts2rts_qp_out_bits {
struct mlx5_ifc_rts2rts_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -3660,7 +3660,7 @@ struct mlx5_ifc_rtr2rts_qp_out_bits {
struct mlx5_ifc_rtr2rts_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -3690,7 +3690,7 @@ struct mlx5_ifc_rst2init_qp_out_bits {
struct mlx5_ifc_rst2init_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -5193,7 +5193,7 @@ struct mlx5_ifc_qp_2rst_out_bits {
struct mlx5_ifc_qp_2rst_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -5215,7 +5215,7 @@ struct mlx5_ifc_qp_2err_out_bits {
struct mlx5_ifc_qp_2err_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -5790,7 +5790,7 @@ struct mlx5_ifc_init2rtr_qp_out_bits {
struct mlx5_ifc_init2rtr_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -5820,7 +5820,7 @@ struct mlx5_ifc_init2init_qp_out_bits {
struct mlx5_ifc_init2init_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -6231,7 +6231,7 @@ struct mlx5_ifc_destroy_qp_out_bits {
struct mlx5_ifc_destroy_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -6896,7 +6896,7 @@ struct mlx5_ifc_create_qp_out_bits {
struct mlx5_ifc_create_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
diff --git a/include/linux/mlx5/qp.h b/include/linux/mlx5/qp.h
index 4778d41085d4..fbe322c966bc 100644
--- a/include/linux/mlx5/qp.h
+++ b/include/linux/mlx5/qp.h
@@ -471,6 +471,7 @@ struct mlx5_core_qp {
int qpn;
struct mlx5_rsc_debug *dbg;
int pid;
+ u16 uid;
};
struct mlx5_core_dct {
--
2.14.4
next prev parent reply other threads:[~2018-09-17 11:03 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-17 11:03 [PATCH rdma-next 00/24] Extend DEVX functionality Leon Romanovsky
2018-09-17 11:03 ` [PATCH mlx5-next 01/25] net/mlx5: Set uid as part of CQ commands Leon Romanovsky
2018-09-17 11:03 ` Leon Romanovsky [this message]
2018-09-19 17:27 ` [PATCH mlx5-next 02/25] net/mlx5: Set uid as part of QP commands Jason Gunthorpe
2018-09-20 4:51 ` Leon Romanovsky
2018-09-17 11:03 ` [PATCH mlx5-next 03/25] net/mlx5: Set uid as part of RQ commands Leon Romanovsky
2018-09-19 17:28 ` Jason Gunthorpe
2018-09-19 18:40 ` Saeed Mahameed
2018-09-19 21:10 ` Jason Gunthorpe
2018-09-17 11:03 ` [PATCH mlx5-next 04/25] net/mlx5: Set uid as part of SQ commands Leon Romanovsky
2018-09-17 11:03 ` [PATCH mlx5-next 05/25] net/mlx5: Set uid as part of SRQ commands Leon Romanovsky
2018-09-17 11:03 ` [PATCH mlx5-next 06/25] net/mlx5: Set uid as part of DCT commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH mlx5-next 07/25] net/mlx5: Update mlx5_ifc with DEVX UID bits Leon Romanovsky
2018-09-19 17:31 ` Jason Gunthorpe
2018-09-20 4:51 ` Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 08/25] IB/mlx5: Set uid as part of CQ creation Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 09/25] IB/mlx5: Set uid as part of QP creation Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 10/25] IB/mlx5: Set uid as part of RQ commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 11/25] IB/mlx5: Set uid as part of SQ commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 12/25] IB/mlx5: Set uid as part of TIR commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 13/25] IB/mlx5: Set uid as part of TIS commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 14/25] IB/mlx5: Set uid as part of RQT commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 15/25] IB/mlx5: Set uid as part of PD commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 16/25] IB/mlx5: Set uid as part of TD commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 17/25] IB/mlx5: Set uid as part of SRQ commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 18/25] IB/mlx5: Set uid as part of DCT commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 19/25] IB/mlx5: Set uid as part of XRCD commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 20/25] IB/mlx5: Set uid as part of MCG commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 21/25] IB/mlx5: Set valid umem bit on DEVX Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 22/25] IB/mlx5: Expose RAW QP device handles to user space Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 23/25] IB/mlx5: Manage device uid for DEVX white list commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 24/25] IB/mlx5: Enable " Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 25/25] IB/mlx5: Enable DEVX on IB Leon Romanovsky
2018-09-17 19:34 ` [PATCH rdma-next 00/24] Extend DEVX functionality Leon Romanovsky
2018-09-17 19:51 ` Or Gerlitz
2018-09-17 20:07 ` Leon Romanovsky
2018-09-17 20:13 ` Or Gerlitz
2018-09-17 20:20 ` Leon Romanovsky
2018-09-19 18:17 ` Jason Gunthorpe
2018-09-20 5:01 ` Leon Romanovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180917110418.18937-3-leon@kernel.org \
--to=leon@kernel.org \
--cc=dledford@redhat.com \
--cc=jgg@mellanox.com \
--cc=leonro@mellanox.com \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=saeedm@mellanox.com \
--cc=yishaih@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.