From: Nadav Amit <namit@vmware.com>
To: Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <linux-kernel@vger.kernel.org>, Nadav Amit <namit@vmware.com>
Subject: [PATCH 12/19] vmw_balloon: general style cleanup
Date: Mon, 17 Sep 2018 23:38:46 -0700 [thread overview]
Message-ID: <20180918063853.198332-13-namit@vmware.com> (raw)
In-Reply-To: <20180918063853.198332-1-namit@vmware.com>
Change all the remaining return values to int to avoid mistakes. Reduce
indentation when possible.
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
---
drivers/misc/vmw_balloon.c | 39 ++++++++++++++++++++++----------------
1 file changed, 23 insertions(+), 16 deletions(-)
diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c
index 50b53213822c..cf5e41dd7048 100644
--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -475,10 +475,9 @@ vmballoon_cmd(struct vmballoon *b, unsigned long cmd, unsigned long arg1,
* Send "start" command to the host, communicating supported version
* of the protocol.
*/
-static bool vmballoon_send_start(struct vmballoon *b, unsigned long req_caps)
+static int vmballoon_send_start(struct vmballoon *b, unsigned long req_caps)
{
unsigned long status, capabilities;
- bool success;
status = __vmballoon_cmd(b, VMW_BALLOON_CMD_START, req_caps, 0,
&capabilities);
@@ -486,14 +485,12 @@ static bool vmballoon_send_start(struct vmballoon *b, unsigned long req_caps)
switch (status) {
case VMW_BALLOON_SUCCESS_WITH_CAPABILITIES:
b->capabilities = capabilities;
- success = true;
break;
case VMW_BALLOON_SUCCESS:
b->capabilities = VMW_BALLOON_BASIC_CMDS;
- success = true;
break;
default:
- success = false;
+ return -EIO;
}
/*
@@ -507,26 +504,29 @@ static bool vmballoon_send_start(struct vmballoon *b, unsigned long req_caps)
b->max_page_size = VMW_BALLOON_2M_PAGE;
- return success;
+ return 0;
}
-/*
+/**
+ * vmballoon_send_guest_id - communicate guest type to the host.
+ *
+ * @b: pointer to the balloon.
+ *
* Communicate guest type to the host so that it can adjust ballooning
* algorithm to the one most appropriate for the guest. This command
* is normally issued after sending "start" command and is part of
* standard reset sequence.
+ *
+ * Return: zero on success or appropriate error code.
*/
-static bool vmballoon_send_guest_id(struct vmballoon *b)
+static int vmballoon_send_guest_id(struct vmballoon *b)
{
unsigned long status;
status = vmballoon_cmd(b, VMW_BALLOON_CMD_GUEST_ID,
VMW_BALLOON_GUEST_ID, 0);
- if (status == VMW_BALLOON_SUCCESS)
- return true;
-
- return false;
+ return status == VMW_BALLOON_SUCCESS ? 0 : -EIO;
}
/**
@@ -1200,8 +1200,15 @@ static void vmballoon_vmci_cleanup(struct vmballoon *b)
}
}
-/*
- * Initialize vmci doorbell, to get notified as soon as balloon changes
+/**
+ * vmballoon_vmci_init - Initialize vmci doorbell.
+ *
+ * @b: pointer to the balloon.
+ *
+ * Return: zero on success or when wakeup command not supported. Error-code
+ * otherwise.
+ *
+ * Initialize vmci doorbell, to get notified as soon as balloon changes.
*/
static int vmballoon_vmci_init(struct vmballoon *b)
{
@@ -1263,7 +1270,7 @@ static void vmballoon_reset(struct vmballoon *b)
/* free all pages, skipping monitor unlock */
vmballoon_pop(b);
- if (!vmballoon_send_start(b, VMW_BALLOON_CAPABILITIES))
+ if (vmballoon_send_start(b, VMW_BALLOON_CAPABILITIES))
return;
if ((b->capabilities & VMW_BALLOON_BATCHED_CMDS) != 0) {
@@ -1287,7 +1294,7 @@ static void vmballoon_reset(struct vmballoon *b)
if (error)
pr_err("failed to initialize vmci doorbell\n");
- if (!vmballoon_send_guest_id(b))
+ if (vmballoon_send_guest_id(b))
pr_err("failed to send guest ID to the host\n");
up_write(&b->conf_sem);
--
2.17.1
next prev parent reply other threads:[~2018-09-18 6:40 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-18 6:38 [PATCH 00/19] vmw_balloon: compaction, shrinker, 64-bit, etc Nadav Amit
2018-09-18 6:38 ` Nadav Amit
2018-09-18 6:38 ` [PATCH 01/19] vmw_balloon: handle commands in a single function Nadav Amit
2018-09-18 6:38 ` [PATCH 02/19] vmw_balloon: unify commands tracing and stats Nadav Amit
2018-09-18 6:38 ` [PATCH 03/19] vmw_balloon: merge send_lock and send_unlock path Nadav Amit
2018-09-18 6:38 ` [PATCH 04/19] vmw_balloon: simplifying batch access Nadav Amit
2018-09-18 6:38 ` [PATCH 05/19] vmw_balloon: remove sleeping allocations Nadav Amit
2018-09-18 10:01 ` kbuild test robot
2018-09-18 6:38 ` [PATCH 06/19] vmw_balloon: change batch/single lock abstractions Nadav Amit
2018-09-18 6:38 ` [PATCH 07/19] vmw_balloon: treat all refused pages equally Nadav Amit
2018-09-18 6:38 ` [PATCH 08/19] vmw_balloon: refactor change size from vmballoon_work Nadav Amit
2018-09-18 8:09 ` kbuild test robot
2018-09-18 12:19 ` kbuild test robot
2018-09-18 6:38 ` [PATCH 09/19] vmw_balloon: simplify vmballoon_send_get_target() Nadav Amit
2018-09-18 6:38 ` [PATCH 10/19] vmw_balloon: stats rework Nadav Amit
2018-09-18 6:38 ` [PATCH 11/19] vmw_balloon: rework the inflate and deflate loops Nadav Amit
2018-09-18 9:55 ` kbuild test robot
2018-09-18 15:46 ` kbuild test robot
2018-09-18 6:38 ` Nadav Amit [this message]
2018-09-18 6:38 ` [PATCH 13/19] vmw_balloon: add reset stat Nadav Amit
2018-09-18 6:38 ` [PATCH 14/19] mm/balloon_compaction: suppress allocation warnings Nadav Amit
2018-09-18 6:38 ` Nadav Amit
2018-09-18 6:38 ` [PATCH 15/19] mm/balloon_compaction: list interfaces Nadav Amit
2018-09-18 6:38 ` Nadav Amit
2018-09-18 6:38 ` [PATCH 16/19] vmw_balloon: compaction support Nadav Amit
2018-09-18 6:38 ` [PATCH 17/19] vmw_balloon: support 64-bit memory limit Nadav Amit
2018-09-18 6:38 ` [PATCH 18/19] vmw_balloon: memory shrinker Nadav Amit
2018-09-18 6:38 ` [PATCH 19/19] vmw_balloon: split refused pages Nadav Amit
2018-09-18 12:27 ` [PATCH 00/19] vmw_balloon: compaction, shrinker, 64-bit, etc Greg Kroah-Hartman
2018-09-18 12:27 ` Greg Kroah-Hartman
2018-09-18 16:42 ` Nadav Amit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180918063853.198332-13-namit@vmware.com \
--to=namit@vmware.com \
--cc=arnd@arndb.de \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.