Re: [PATCH v4 1/6] drm/i915/runtime_pm: Share code to enable/disable PCH reset handshake

[Rodrigo Vivi <rodrigo.vivi@intel.com>]

On Tue, Sep 18, 2018 at 01:47:09PM -0700, José Roberto de Souza wrote:
> Instead of have the same code spread into 4 platforms lets share it.
> BXT do not have a PCH so here also handling this case by unseting
> RESET_PCH_HANDSHAKE_ENABLE.
> 
> v2(Rodrigo):
> - renamed to intel_pch_reset_handshake()
> - added comment about why BXT need the bit to be unset
> 
> v3(Rodrigo and Ville):
> - added bool have_pch to intel_pch_reset_handshake()
> - added back BXT comment

thanks!

> 
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> Signed-off-by: José Roberto de Souza <jose.souza@intel.com>

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

> ---
>  drivers/gpu/drm/i915/intel_runtime_pm.c | 30 ++++++++++++++-----------
>  1 file changed, 17 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 9bebec389de1..aa0ff4c08bad 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -3239,18 +3239,29 @@ static void icl_mbus_init(struct drm_i915_private *dev_priv)
>  	I915_WRITE(MBUS_ABOX_CTL, val);
>  }
>  
> +static void intel_pch_reset_handshake(struct drm_i915_private *dev_priv,
> +				      bool enable)
> +{
> +	u32 val = I915_READ(HSW_NDE_RSTWRN_OPT);
> +
> +	if (enable)
> +		val |= RESET_PCH_HANDSHAKE_ENABLE;
> +	else
> +		val &= ~RESET_PCH_HANDSHAKE_ENABLE;
> +
> +	I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
> +}
> +
>  static void skl_display_core_init(struct drm_i915_private *dev_priv,
>  				   bool resume)
>  {
>  	struct i915_power_domains *power_domains = &dev_priv->power_domains;
>  	struct i915_power_well *well;
> -	uint32_t val;
>  
>  	gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
>  
>  	/* enable PCH reset handshake */
> -	val = I915_READ(HSW_NDE_RSTWRN_OPT);
> -	I915_WRITE(HSW_NDE_RSTWRN_OPT, val | RESET_PCH_HANDSHAKE_ENABLE);
> +	intel_pch_reset_handshake(dev_priv, true);
>  
>  	/* enable PG1 and Misc I/O */
>  	mutex_lock(&power_domains->lock);
> @@ -3306,7 +3317,6 @@ void bxt_display_core_init(struct drm_i915_private *dev_priv,
>  {
>  	struct i915_power_domains *power_domains = &dev_priv->power_domains;
>  	struct i915_power_well *well;
> -	uint32_t val;
>  
>  	gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
>  
> @@ -3316,9 +3326,7 @@ void bxt_display_core_init(struct drm_i915_private *dev_priv,
>  	 * Move the handshake programming to initialization sequence.
>  	 * Previously was left up to BIOS.
>  	 */
> -	val = I915_READ(HSW_NDE_RSTWRN_OPT);
> -	val &= ~RESET_PCH_HANDSHAKE_ENABLE;
> -	I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
> +	intel_pch_reset_handshake(dev_priv, false);
>  
>  	/* Enable PG1 */
>  	mutex_lock(&power_domains->lock);
> @@ -3439,9 +3447,7 @@ static void cnl_display_core_init(struct drm_i915_private *dev_priv, bool resume
>  	gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
>  
>  	/* 1. Enable PCH Reset Handshake */
> -	val = I915_READ(HSW_NDE_RSTWRN_OPT);
> -	val |= RESET_PCH_HANDSHAKE_ENABLE;
> -	I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
> +	intel_pch_reset_handshake(dev_priv, true);
>  
>  	/* 2. Enable Comp */
>  	val = I915_READ(CHICKEN_MISC_2);
> @@ -3524,9 +3530,7 @@ static void icl_display_core_init(struct drm_i915_private *dev_priv,
>  	gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
>  
>  	/* 1. Enable PCH reset handshake. */
> -	val = I915_READ(HSW_NDE_RSTWRN_OPT);
> -	val |= RESET_PCH_HANDSHAKE_ENABLE;
> -	I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
> +	intel_pch_reset_handshake(dev_priv, true);
>  
>  	for (port = PORT_A; port <= PORT_B; port++) {
>  		/* 2. Enable DDI combo PHY comp. */
> -- 
> 2.19.0
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx