From: Luca Boccassi <bluca@debian.org>
To: dev@dpdk.org
Cc: maxime.coquelin@redhat.com, tiwei.bie@intel.com,
yongwang@vmware.com, 3chas3@gmail.com,
bruce.richardson@intel.com, jianfeng.tan@intel.com,
anatoly.burakov@intel.com, llouis@vmware.com,
brussell@vyatta.att-mail.com
Subject: [PATCH v2 2/3] net/vmxnet3: fix vmxnet3 dev_uninit() hot-unplug
Date: Wed, 19 Sep 2018 13:57:56 +0100 [thread overview]
Message-ID: <20180919125757.17938-2-bluca@debian.org> (raw)
In-Reply-To: <20180919125757.17938-1-bluca@debian.org>
The vmxnet3 driver can't call back into dev_close(), and possibly
dev_stop(), in dev_uninit(). When dev_uninit() is called, anything
that those routines would want to clean up has already been released.
Further, for complete cleanup, it is necessary to release any of the
queue resources during dev_close().
This allows a vmxnet3 device to be hot-unplugged without leaking
queues.
Fixes: dfaff37fc46d ("vmxnet3: import new vmxnet3 poll mode driver implementation")
Cc: stable@dpdk.org
Signed-off-by: Brian Russell <brussell@brocade.com>
Signed-off-by: Luca Boccassi <bluca@debian.org>
---
v2: add back extra close() call in uninit() for buggy applications as
requested by the reviewers, and add debug log noting the issue
drivers/net/vmxnet3/vmxnet3_ethdev.c | 35 +++++++++++++++++++++++-----
1 file changed, 29 insertions(+), 6 deletions(-)
diff --git a/drivers/net/vmxnet3/vmxnet3_ethdev.c b/drivers/net/vmxnet3/vmxnet3_ethdev.c
index f1596ab19d..98e5d01890 100644
--- a/drivers/net/vmxnet3/vmxnet3_ethdev.c
+++ b/drivers/net/vmxnet3/vmxnet3_ethdev.c
@@ -354,8 +354,10 @@ eth_vmxnet3_dev_uninit(struct rte_eth_dev *eth_dev)
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
- if (hw->adapter_stopped == 0)
+ if (hw->adapter_stopped == 0) {
+ PMD_INIT_LOG(DEBUG, "Device has not been closed.");
vmxnet3_dev_close(eth_dev);
+ }
eth_dev->dev_ops = NULL;
eth_dev->rx_pkt_burst = NULL;
@@ -802,7 +804,7 @@ vmxnet3_dev_stop(struct rte_eth_dev *dev)
PMD_INIT_FUNC_TRACE();
if (hw->adapter_stopped == 1) {
- PMD_INIT_LOG(DEBUG, "Device already closed.");
+ PMD_INIT_LOG(DEBUG, "Device already stopped.");
return;
}
@@ -826,7 +828,6 @@ vmxnet3_dev_stop(struct rte_eth_dev *dev)
/* reset the device */
VMXNET3_WRITE_BAR1_REG(hw, VMXNET3_REG_CMD, VMXNET3_CMD_RESET_DEV);
PMD_INIT_LOG(DEBUG, "Device reset.");
- hw->adapter_stopped = 0;
vmxnet3_dev_clear_queues(dev);
@@ -836,6 +837,30 @@ vmxnet3_dev_stop(struct rte_eth_dev *dev)
link.link_speed = ETH_SPEED_NUM_10G;
link.link_autoneg = ETH_LINK_FIXED;
rte_eth_linkstatus_set(dev, &link);
+
+ hw->adapter_stopped = 1;
+}
+
+static void
+vmxnet3_free_queues(struct rte_eth_dev *dev)
+{
+ int i;
+
+ PMD_INIT_FUNC_TRACE();
+
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ void *rxq = dev->data->rx_queues[i];
+
+ vmxnet3_dev_rx_queue_release(rxq);
+ }
+ dev->data->nb_rx_queues = 0;
+
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ void *txq = dev->data->tx_queues[i];
+
+ vmxnet3_dev_tx_queue_release(txq);
+ }
+ dev->data->nb_tx_queues = 0;
}
/*
@@ -844,12 +869,10 @@ vmxnet3_dev_stop(struct rte_eth_dev *dev)
static void
vmxnet3_dev_close(struct rte_eth_dev *dev)
{
- struct vmxnet3_hw *hw = dev->data->dev_private;
-
PMD_INIT_FUNC_TRACE();
vmxnet3_dev_stop(dev);
- hw->adapter_stopped = 1;
+ vmxnet3_free_queues(dev);
}
static void
--
2.18.0
next prev parent reply other threads:[~2018-09-19 12:58 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-16 13:50 [PATCH 0/3] Fix hot plug/unplug of virtual devices Luca Boccassi
2018-08-16 13:50 ` [PATCH 1/3] net/virtio: register/unregister intr handler on start/stop Luca Boccassi
2018-08-16 13:50 ` [PATCH 2/3] net/vmxnet3: fix vmxnet3 dev_uninit() hot-unplug Luca Boccassi
2018-09-17 19:06 ` Louis Luo
2018-09-18 13:14 ` Luca Boccassi
2018-09-18 18:14 ` Louis Luo
2018-09-18 18:29 ` Luca Boccassi
2018-09-18 18:48 ` Louis Luo
2018-09-19 12:58 ` Luca Boccassi
2018-08-16 13:50 ` [PATCH 3/3] eal/linux: handle uio read failure in interrupt handler Luca Boccassi
2018-09-19 12:57 ` [PATCH v2 1/3] net/virtio: register/unregister intr handler on start/stop Luca Boccassi
2018-09-19 12:57 ` Luca Boccassi [this message]
2018-09-19 15:47 ` [PATCH v2 2/3] net/vmxnet3: fix vmxnet3 dev_uninit() hot-unplug Chas Williams
2018-09-19 16:08 ` Luca Boccassi
2018-10-27 15:09 ` Thomas Monjalon
2018-10-31 17:27 ` Thomas Monjalon
2018-10-31 17:46 ` Luca Boccassi
2018-10-31 18:02 ` Thomas Monjalon
2018-10-31 18:54 ` Louis Luo
2018-09-27 8:39 ` Luca Boccassi
2018-09-19 12:57 ` [PATCH v2 3/3] eal/linux: handle uio read failure in interrupt handler Luca Boccassi
2018-10-11 10:32 ` Thomas Monjalon
2018-09-27 8:40 ` [PATCH v2 1/3] net/virtio: register/unregister intr handler on start/stop Luca Boccassi
2018-09-27 10:51 ` Maxime Coquelin
2018-09-27 11:14 ` Maxime Coquelin
2018-10-31 18:39 ` [PATCH v3 " Luca Boccassi
2018-10-31 18:39 ` [PATCH v3 2/3] net/vmxnet3: fix vmxnet3 dev_uninit() hot-unplug Luca Boccassi
2018-10-31 18:39 ` [PATCH v3 3/3] eal/linux: handle uio read failure in interrupt handler Luca Boccassi
2018-11-02 9:49 ` [dpdk-stable] [PATCH v3 1/3] net/virtio: register/unregister intr handler on start/stop Thomas Monjalon
2018-11-02 11:14 ` Luca Boccassi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180919125757.17938-2-bluca@debian.org \
--to=bluca@debian.org \
--cc=3chas3@gmail.com \
--cc=anatoly.burakov@intel.com \
--cc=bruce.richardson@intel.com \
--cc=brussell@vyatta.att-mail.com \
--cc=dev@dpdk.org \
--cc=jianfeng.tan@intel.com \
--cc=llouis@vmware.com \
--cc=maxime.coquelin@redhat.com \
--cc=tiwei.bie@intel.com \
--cc=yongwang@vmware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.