Re: [PATCH v3 1/2] dt-bindings: hwmon: Add ina3221 documentation

[Nicolin Chen <nicoleotsuka@gmail.com>]

> >+2) child nodes
> >+  The names of child nodes should indicate input source names
> >+
> >+  Required properties:
> >+  - input-id: Must be 1, 2 or 3
> >+
> >+  Optional properties:
> >+  - shunt-resistor: Shunt resistor value in micro-Ohm
> >+  - status: Should be "disabled" if no input source
> >+
> >+  Example:
> >+
> >+  input1 {
> >+          input-id = <0x1>;
> >+          status = "disabled";
> >+  };
> >+  VDD_GPU {
> >+          input-id = <0x2>;
> >+          shunt-resistor = <5000>;
> >+  };
> >
> 
> Using child nodes is a good idea. However, you are converting the node name into
> the hwmon 'label' attribute which I can not accept. First, it is undocumented,
> second, it effectively creates an undocumented property (if one wants to configure
> the shunt resistor value, one has to configure a child node which is converted
> into a label), and third, it violates the hwmon ABI ('input1' is not a "hint
> about what this voltage channel is being used for").

Oh. I see the point here now. Then a child name could be just input[123],
and I will add a separate optional child property to indicate the label.

Will fix it in next ver.

Thanks
Nicolin