[3/5] EDAC, skx_edac: Clean up debugfs

["Luck, Tony" <tony.luck@intel.com>]

From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>

1) The skx_edac debugfs node is '/sys/kernel/debug/skx_edac_test,
   move it under EDAC debugfs root node '/sys/kernel/debug/edac/'

2) Use skx_mce_check_error() instead of skx_decode() for debugfs,
   then the decoded result is showed via EDAC core. Because EDAC
   core show the decoded result in a more readable format as like:
   CPU_SrcID#[0-9]_MC#[0-9]_Chan#[0-9]_DIMM#[0-9].

Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 drivers/edac/skx_edac.c | 89 +++++++++++++++++++----------------------
 1 file changed, 42 insertions(+), 47 deletions(-)

diff --git a/drivers/edac/skx_edac.c b/drivers/edac/skx_edac.c
index fae095162c01..ba2c474559e0 100644
--- a/drivers/edac/skx_edac.c
+++ b/drivers/edac/skx_edac.c
@@ -894,53 +894,6 @@ static bool skx_decode(struct decoded_addr *res)
 		skx_rir_decode(res) && skx_mad_decode(res);
 }
 
-#ifdef CONFIG_EDAC_DEBUG
-/*
- * Debug feature. Make /sys/kernel/debug/skx_edac_test/addr.
- * Write an address to this file to exercise the address decode
- * logic in this driver.
- */
-static struct dentry *skx_test;
-static u64 skx_fake_addr;
-
-static int debugfs_u64_set(void *data, u64 val)
-{
-	struct decoded_addr res;
-
-	res.addr = val;
-	skx_decode(&res);
-
-	return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
-
-static struct dentry *mydebugfs_create(const char *name, umode_t mode,
-				       struct dentry *parent, u64 *value)
-{
-	return debugfs_create_file(name, mode, parent, value, &fops_u64_wo);
-}
-
-static void setup_skx_debug(void)
-{
-	skx_test = debugfs_create_dir("skx_edac_test", NULL);
-	mydebugfs_create("addr", S_IWUSR, skx_test, &skx_fake_addr);
-}
-
-static void teardown_skx_debug(void)
-{
-	debugfs_remove_recursive(skx_test);
-}
-#else
-static void setup_skx_debug(void)
-{
-}
-
-static void teardown_skx_debug(void)
-{
-}
-#endif /*CONFIG_EDAC_DEBUG*/
-
 static void skx_mce_output_error(struct mem_ctl_info *mci,
 				 const struct mce *m,
 				 struct decoded_addr *res)
@@ -1072,6 +1025,48 @@ static struct notifier_block skx_mce_dec = {
 	.priority	= MCE_PRIO_EDAC,
 };
 
+#ifdef CONFIG_EDAC_DEBUG
+/*
+ * Debug feature. Make /sys/kernel/debug/edac/skx_edac_test/addr.
+ * Write an address to this file to exercise the address decode
+ * logic in this driver.
+ */
+static struct dentry *skx_test;
+static u64 skx_fake_addr;
+
+static int debugfs_u64_set(void *data, u64 val)
+{
+	struct mce m;
+
+	m.mcgstatus = 0;
+	/* ADDRV + MemRd + Unknown channel */
+	m.status = MCI_STATUS_ADDRV + 0x90;
+	/* One corrected error */
+	m.status |= 1ULL << MCI_STATUS_CEC_SHIFT;
+	m.addr = val;
+	m.socketid = 0;
+	skx_mce_check_error(NULL, 0, &m);
+
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
+
+static void setup_skx_debug(void)
+{
+	skx_test = edac_debugfs_create_dir("skx_edac_test");
+	edac_debugfs_create_file("addr", 0200, skx_test,
+				 &skx_fake_addr, &fops_u64_wo);
+}
+
+static void teardown_skx_debug(void)
+{
+	debugfs_remove_recursive(skx_test);
+}
+#else
+static void setup_skx_debug(void) {}
+static void teardown_skx_debug(void) {}
+#endif /*CONFIG_EDAC_DEBUG*/
+
 static void skx_remove(void)
 {
 	int i, j;