All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: Keerthy <j-keerthy@ti.com>
Cc: devicetree@vger.kernel.org, "Dave Gerlach" <d-gerlach@ti.com>,
	"Tero Kristo" <t-kristo@ti.com>,
	"Benoît Cousson" <bcousson@baylibre.com>,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/4] Update am437x and am335x dts to probe with ti-sysc
Date: Wed, 26 Sep 2018 09:23:03 -0700	[thread overview]
Message-ID: <20180926162303.GU5662@atomide.com> (raw)
In-Reply-To: <20180926155911.GT5662@atomide.com>

* Tony Lindgren <tony@atomide.com> [180926 16:04]:
> * Keerthy <j-keerthy@ti.com> [180926 04:12]:
> > So the below patch is solving the problem only for the first iteration
> > but i see the problem recurring from second iteration of suspend.
> > 
> > I tried the above cycle multiple times on am437x-gp-evm. I believe
> > we are one step closer still not completely fixed.
> 
> OK thanks, that's interesting, I'll take a look. Good to hear
> that is the reason for pixcir issues though :)

Heh ooops the previous i2c-omap patch I posted does unpaired
runtime_pm calls.. The put must be left out omap_i2c_resume().

Below is a better patch, seems to work for me multiple times
now.

Regards,

Tony

8< ---------------------------
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -208,6 +208,8 @@ struct omap_i2c_dev {
 						 * if set, should be trsh+1
 						 */
 	u32			rev;
+	unsigned int		is_suspended:1;
+	unsigned int		needs_resume:1;
 	unsigned		b_hw:1;		/* bad h/w fixes */
 	unsigned		bb_valid:1;	/* true when BB-bit reflects
 						 * the I2C bus state
@@ -1498,8 +1500,7 @@ static int omap_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int omap_i2c_runtime_suspend(struct device *dev)
+static int __maybe_unused omap_i2c_runtime_suspend(struct device *dev)
 {
 	struct omap_i2c_dev *omap = dev_get_drvdata(dev);
 
@@ -1521,11 +1522,12 @@ static int omap_i2c_runtime_suspend(struct device *dev)
 	}
 
 	pinctrl_pm_select_sleep_state(dev);
+	omap->is_suspended = true;
 
 	return 0;
 }
 
-static int omap_i2c_runtime_resume(struct device *dev)
+static int __maybe_unused omap_i2c_runtime_resume(struct device *dev)
 {
 	struct omap_i2c_dev *omap = dev_get_drvdata(dev);
 
@@ -1535,6 +1537,51 @@ static int omap_i2c_runtime_resume(struct device *dev)
 		return 0;
 
 	__omap_i2c_init(omap);
+	omap->is_suspended = false;
+
+	return 0;
+}
+
+static int __maybe_unused omap_i2c_suspend(struct device *dev)
+{
+	struct omap_i2c_dev *ddata = dev_get_drvdata(dev);
+	int error;
+
+	/* Is device still enabled because of autosuspend? */
+	if (ddata->is_suspended)
+		return 0;
+
+	/* Paired with call in omap_i2c_resume() */
+	error = pm_runtime_put_sync_suspend(dev);
+	if (error < 0) {
+		dev_err(dev, "%s failed: %i\n", __func__, error);
+
+		return error;
+	}
+
+	ddata->needs_resume = true;
+
+	return 0;
+}
+
+static int __maybe_unused omap_i2c_resume(struct device *dev)
+{
+	struct omap_i2c_dev *ddata = dev_get_drvdata(dev);
+	int error;
+
+	if (!ddata->needs_resume)
+		return 0;
+
+	/* Paired with call in omap_i2c_suspend() */
+	error = pm_runtime_get_sync(dev);
+	if (error < 0) {
+		dev_err(dev, "%s failed: %i\n", __func__, error);
+		pm_runtime_put_noidle(dev);
+
+		return error;
+	}
+
+	ddata->needs_resume = false;
 
 	return 0;
 }
@@ -1542,18 +1589,15 @@ static int omap_i2c_runtime_resume(struct device *dev)
 static const struct dev_pm_ops omap_i2c_pm_ops = {
 	SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend,
 			   omap_i2c_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(omap_i2c_suspend, omap_i2c_resume)
 };
-#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
-#else
-#define OMAP_I2C_PM_OPS NULL
-#endif /* CONFIG_PM */
 
 static struct platform_driver omap_i2c_driver = {
 	.probe		= omap_i2c_probe,
 	.remove		= omap_i2c_remove,
 	.driver		= {
 		.name	= "omap_i2c",
-		.pm	= OMAP_I2C_PM_OPS,
+		.pm	= &omap_i2c_pm_ops,
 		.of_match_table = of_match_ptr(omap_i2c_of_match),
 	},
 };
-- 
2.19.0

WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/4] Update am437x and am335x dts to probe with ti-sysc
Date: Wed, 26 Sep 2018 09:23:03 -0700	[thread overview]
Message-ID: <20180926162303.GU5662@atomide.com> (raw)
In-Reply-To: <20180926155911.GT5662@atomide.com>

* Tony Lindgren <tony@atomide.com> [180926 16:04]:
> * Keerthy <j-keerthy@ti.com> [180926 04:12]:
> > So the below patch is solving the problem only for the first iteration
> > but i see the problem recurring from second iteration of suspend.
> > 
> > I tried the above cycle multiple times on am437x-gp-evm. I believe
> > we are one step closer still not completely fixed.
> 
> OK thanks, that's interesting, I'll take a look. Good to hear
> that is the reason for pixcir issues though :)

Heh ooops the previous i2c-omap patch I posted does unpaired
runtime_pm calls.. The put must be left out omap_i2c_resume().

Below is a better patch, seems to work for me multiple times
now.

Regards,

Tony

8< ---------------------------
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -208,6 +208,8 @@ struct omap_i2c_dev {
 						 * if set, should be trsh+1
 						 */
 	u32			rev;
+	unsigned int		is_suspended:1;
+	unsigned int		needs_resume:1;
 	unsigned		b_hw:1;		/* bad h/w fixes */
 	unsigned		bb_valid:1;	/* true when BB-bit reflects
 						 * the I2C bus state
@@ -1498,8 +1500,7 @@ static int omap_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int omap_i2c_runtime_suspend(struct device *dev)
+static int __maybe_unused omap_i2c_runtime_suspend(struct device *dev)
 {
 	struct omap_i2c_dev *omap = dev_get_drvdata(dev);
 
@@ -1521,11 +1522,12 @@ static int omap_i2c_runtime_suspend(struct device *dev)
 	}
 
 	pinctrl_pm_select_sleep_state(dev);
+	omap->is_suspended = true;
 
 	return 0;
 }
 
-static int omap_i2c_runtime_resume(struct device *dev)
+static int __maybe_unused omap_i2c_runtime_resume(struct device *dev)
 {
 	struct omap_i2c_dev *omap = dev_get_drvdata(dev);
 
@@ -1535,6 +1537,51 @@ static int omap_i2c_runtime_resume(struct device *dev)
 		return 0;
 
 	__omap_i2c_init(omap);
+	omap->is_suspended = false;
+
+	return 0;
+}
+
+static int __maybe_unused omap_i2c_suspend(struct device *dev)
+{
+	struct omap_i2c_dev *ddata = dev_get_drvdata(dev);
+	int error;
+
+	/* Is device still enabled because of autosuspend? */
+	if (ddata->is_suspended)
+		return 0;
+
+	/* Paired with call in omap_i2c_resume() */
+	error = pm_runtime_put_sync_suspend(dev);
+	if (error < 0) {
+		dev_err(dev, "%s failed: %i\n", __func__, error);
+
+		return error;
+	}
+
+	ddata->needs_resume = true;
+
+	return 0;
+}
+
+static int __maybe_unused omap_i2c_resume(struct device *dev)
+{
+	struct omap_i2c_dev *ddata = dev_get_drvdata(dev);
+	int error;
+
+	if (!ddata->needs_resume)
+		return 0;
+
+	/* Paired with call in omap_i2c_suspend() */
+	error = pm_runtime_get_sync(dev);
+	if (error < 0) {
+		dev_err(dev, "%s failed: %i\n", __func__, error);
+		pm_runtime_put_noidle(dev);
+
+		return error;
+	}
+
+	ddata->needs_resume = false;
 
 	return 0;
 }
@@ -1542,18 +1589,15 @@ static int omap_i2c_runtime_resume(struct device *dev)
 static const struct dev_pm_ops omap_i2c_pm_ops = {
 	SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend,
 			   omap_i2c_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(omap_i2c_suspend, omap_i2c_resume)
 };
-#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
-#else
-#define OMAP_I2C_PM_OPS NULL
-#endif /* CONFIG_PM */
 
 static struct platform_driver omap_i2c_driver = {
 	.probe		= omap_i2c_probe,
 	.remove		= omap_i2c_remove,
 	.driver		= {
 		.name	= "omap_i2c",
-		.pm	= OMAP_I2C_PM_OPS,
+		.pm	= &omap_i2c_pm_ops,
 		.of_match_table = of_match_ptr(omap_i2c_of_match),
 	},
 };
-- 
2.19.0

  reply	other threads:[~2018-09-26 16:23 UTC|newest]

Thread overview: 66+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-25  0:05 [PATCH 0/4] Update am437x and am335x dts to probe with ti-sysc Tony Lindgren
2018-09-25  0:05 ` Tony Lindgren
2018-09-25  0:05 ` [PATCH 1/4] ARM: dts: am437x: Add l4 interconnect hierarchy and ti-sysc data Tony Lindgren
2018-09-25  0:05   ` Tony Lindgren
2018-09-25  0:05 ` [PATCH 2/4] ARM: dts: am437x: Move l4 child devices to probe them with ti-sysc Tony Lindgren
2018-09-25  0:05   ` Tony Lindgren
2018-12-04 12:23   ` Peter Ujfalusi
2018-12-04 12:23     ` Peter Ujfalusi
2018-12-04 18:11     ` Tony Lindgren
2018-12-04 18:11       ` Tony Lindgren
2018-12-04 23:18       ` Tony Lindgren
2018-12-04 23:18         ` Tony Lindgren
2018-12-05  6:14         ` Peter Ujfalusi
2018-12-05 19:00           ` Tony Lindgren
2018-12-05 19:00             ` Tony Lindgren
2018-12-05 23:02             ` Tony Lindgren
2018-12-05 23:02               ` Tony Lindgren
2018-12-07 12:46               ` Peter Ujfalusi
2018-09-25  0:05 ` [PATCH 3/4] ARM: dts: am335x: Add l4 interconnect hierarchy and ti-sysc data Tony Lindgren
2018-09-25  0:05   ` Tony Lindgren
2018-09-27 14:56   ` Tony Lindgren
2018-09-27 14:56     ` Tony Lindgren
2018-09-25  0:05 ` [PATCH 4/4] ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc Tony Lindgren
2018-09-25  0:05   ` Tony Lindgren
2018-11-27 13:03   ` Peter Ujfalusi
2018-11-27 13:03     ` Peter Ujfalusi
2018-11-27 16:16     ` Tony Lindgren
2018-11-27 16:16       ` Tony Lindgren
2018-11-28 12:52       ` Peter Ujfalusi
2018-11-28 12:52         ` Peter Ujfalusi
2018-11-29 19:07         ` Tony Lindgren
2018-11-29 19:07           ` Tony Lindgren
2018-09-25  5:14 ` [PATCH 0/4] Update am437x and am335x dts to probe " Keerthy
2018-09-25  5:14   ` Keerthy
2018-09-25 14:40   ` Tony Lindgren
2018-09-25 14:40     ` Tony Lindgren
2018-09-25 17:55     ` Tony Lindgren
2018-09-25 17:55       ` Tony Lindgren
2018-09-25 21:16       ` Grygorii Strashko
2018-09-25 21:16         ` Grygorii Strashko
2018-09-26  4:08       ` Keerthy
2018-09-26  4:08         ` Keerthy
2018-09-26 15:59         ` Tony Lindgren
2018-09-26 15:59           ` Tony Lindgren
2018-09-26 16:23           ` Tony Lindgren [this message]
2018-09-26 16:23             ` Tony Lindgren
2018-09-26 21:36             ` Grygorii Strashko
2018-09-26 21:36               ` Grygorii Strashko
2018-09-26 23:31               ` Tony Lindgren
2018-09-26 23:31                 ` Tony Lindgren
2018-09-27  4:55                 ` Keerthy
2018-09-27  4:55                   ` Keerthy
2018-09-27 14:53                   ` Tony Lindgren
2018-09-27 14:53                     ` Tony Lindgren
2018-09-27 21:43                     ` Tony Lindgren
2018-09-27 21:43                       ` Tony Lindgren
2018-10-01 16:32                   ` Tony Lindgren
2018-10-01 16:32                     ` Tony Lindgren
2018-10-04  4:29                     ` Keerthy
2018-10-04  4:29                       ` Keerthy
2018-10-04 14:23                       ` Tony Lindgren
2018-10-04 14:23                         ` Tony Lindgren
2018-09-27 19:11                 ` Grygorii Strashko
2018-09-27 19:11                   ` Grygorii Strashko
2018-09-27 19:38                   ` Tony Lindgren
2018-09-27 19:38                     ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180926162303.GU5662@atomide.com \
    --to=tony@atomide.com \
    --cc=bcousson@baylibre.com \
    --cc=d-gerlach@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=j-keerthy@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=t-kristo@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.