From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: "Benoît Cousson" <bcousson@baylibre.com>,
devicetree@vger.kernel.org, "Dave Gerlach" <d-gerlach@ti.com>,
Keerthy <j-keerthy@ti.com>, "Tero Kristo" <t-kristo@ti.com>
Subject: [PATCH 2/4] bus: ti-sysc: Detect devices for debug on dra7
Date: Thu, 27 Sep 2018 14:05:40 -0700 [thread overview]
Message-ID: <20180927210542.69703-3-tony@atomide.com> (raw)
In-Reply-To: <20180927210542.69703-1-tony@atomide.com>
We want to see the names of detected devices when DEBUG is enabled.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/bus/ti-sysc.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -898,7 +898,9 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
#ifdef DEBUG
SYSC_QUIRK("adc", 0, 0, 0x10, -1, 0x47300001, 0xffffffff, 0),
+ SYSC_QUIRK("atl", 0, 0, -1, -1, 0x0a070100, 0xffffffff, 0),
SYSC_QUIRK("aess", 0, 0, 0x10, -1, 0x40000000, 0xffffffff, 0),
+ SYSC_QUIRK("cm", 0, 0, -1, -1, 0x40000301, 0xffffffff, 0),
SYSC_QUIRK("control", 0, 0, 0x10, -1, 0x40000900, 0xffffffff, 0),
SYSC_QUIRK("cpgmac", 0, 0x1200, 0x1208, 0x1204, 0x4edb1902,
0xffff00f0, 0),
@@ -911,16 +913,16 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x0000000a, 0xffffffff, 0),
SYSC_QUIRK("hsi", 0, 0, 0x10, 0x14, 0x50043101, 0xffffffff, 0),
SYSC_QUIRK("iss", 0, 0, 0x10, -1, 0x40000101, 0xffffffff, 0),
- SYSC_QUIRK("i2c", 0, 0, 0x10, 0x90, 0x5040000a, 0xfffffff0, 0),
+ SYSC_QUIRK("i2c", 0, 0, 0x10, 0x90, 0x5040000a, 0xfffff0f0, 0),
SYSC_QUIRK("lcdc", 0, 0, 0x54, -1, 0x4f201000, 0xffffffff, 0),
SYSC_QUIRK("mcasp", 0, 0, 0x4, -1, 0x44306302, 0xffffffff, 0),
SYSC_QUIRK("mcasp", 0, 0, 0x4, -1, 0x44307b02, 0xffffffff, 0),
SYSC_QUIRK("mcbsp", 0, -1, 0x8c, -1, 0, 0, 0),
- SYSC_QUIRK("mcspi", 0, 0, 0x10, -1, 0x40300a0b, 0xffffffff, 0),
+ SYSC_QUIRK("mcspi", 0, 0, 0x10, -1, 0x40300a0b, 0xffff00ff, 0),
SYSC_QUIRK("mcspi", 0, 0, 0x110, 0x114, 0x40300a0b, 0xffffffff, 0),
SYSC_QUIRK("mailbox", 0, 0, 0x10, -1, 0x00000400, 0xffffffff, 0),
SYSC_QUIRK("m3", 0, 0, -1, -1, 0x5f580105, 0x0fff0f00, 0),
- SYSC_QUIRK("ocp2scp", 0, 0, 0x10, 0x14, 0x50060005, 0xffffffff, 0),
+ SYSC_QUIRK("ocp2scp", 0, 0, 0x10, 0x14, 0x50060005, 0xfffffff0, 0),
SYSC_QUIRK("ocp2scp", 0, 0, -1, -1, 0x50060007, 0xffffffff, 0),
SYSC_QUIRK("padconf", 0, 0, 0x10, -1, 0x4fff0800, 0xffffffff, 0),
SYSC_QUIRK("prcm", 0, 0, -1, -1, 0x40000100, 0xffffffff, 0),
@@ -929,15 +931,16 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("scm", 0, 0, 0x10, -1, 0x40000900, 0xffffffff, 0),
SYSC_QUIRK("scm", 0, 0, -1, -1, 0x4e8b0100, 0xffffffff, 0),
SYSC_QUIRK("scm", 0, 0, -1, -1, 0x4f000100, 0xffffffff, 0),
+ SYSC_QUIRK("scm", 0, 0, -1, -1, 0x40000900, 0xffffffff, 0),
SYSC_QUIRK("scrm", 0, 0, -1, -1, 0x00000010, 0xffffffff, 0),
- SYSC_QUIRK("sdio", 0, 0, 0x10, -1, 0x40202301, 0xffffffff, 0),
+ SYSC_QUIRK("sdio", 0, 0, 0x10, -1, 0x40202301, 0xffff0ff0, 0),
SYSC_QUIRK("sdio", 0, 0x2fc, 0x110, 0x114, 0x31010000, 0xffffffff, 0),
SYSC_QUIRK("sdma", 0, 0, 0x2c, 0x28, 0x00010900, 0xffffffff, 0),
SYSC_QUIRK("slimbus", 0, 0, 0x10, -1, 0x40000902, 0xffffffff, 0),
SYSC_QUIRK("slimbus", 0, 0, 0x10, -1, 0x40002903, 0xffffffff, 0),
SYSC_QUIRK("spinlock", 0, 0, 0x10, -1, 0x50020000, 0xffffffff, 0),
SYSC_QUIRK("rng", 0, 0x1fe0, 0x1fe4, -1, 0x00000020, 0xffffffff, 0),
- SYSC_QUIRK("rtc", 0, 0x74, 0x78, -1, 0x4eb01908, 0xfffff0f0, 0),
+ SYSC_QUIRK("rtc", 0, 0x74, 0x78, -1, 0x4eb01908, 0xffff00f0, 0),
SYSC_QUIRK("timer32k", 0, 0, 0x4, -1, 0x00000060, 0xffffffff, 0),
SYSC_QUIRK("usbhstll", 0, 0, 0x10, 0x14, 0x00000004, 0xffffffff, 0),
SYSC_QUIRK("usb_host_hs", 0, 0, 0x10, 0x14, 0x50700100, 0xffffffff, 0),
--
2.19.0
next prev parent reply other threads:[~2018-09-28 3:26 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-27 21:05 [PATCH 0/4] Update dra7 dts to probe with ti-sysc Tony Lindgren
2018-09-27 21:05 ` [PATCH 1/4] bus: ti-sysc: Detect timer and gpio on dra7 Tony Lindgren
2018-09-27 21:05 ` Tony Lindgren [this message]
2018-09-27 21:05 ` [PATCH 3/4] ARM: dts: dra7: Add l4 interconnect hierarchy and ti-sysc data Tony Lindgren
2018-09-27 21:05 ` [PATCH 4/4] ARM: dts: dra7: Move l4 child devices to probe them with ti-sysc Tony Lindgren
2018-09-28 11:38 ` [PATCH 0/4] Update dra7 dts to probe " Keerthy
2018-09-28 17:56 ` Tony Lindgren
2018-09-28 21:30 ` Grygorii Strashko
2018-09-28 22:32 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180927210542.69703-3-tony@atomide.com \
--to=tony@atomide.com \
--cc=bcousson@baylibre.com \
--cc=d-gerlach@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=j-keerthy@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.