All of lore.kernel.org
 help / color / mirror / Atom feed
From: Balakrishna Godavarthi <bgodavar@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
	linux-bluetooth@vger.kernel.org, hemantg@codeaurora.org,
	linux-arm-msm@vger.kernel.org,
	Balakrishna Godavarthi <bgodavar@codeaurora.org>,
	Harish Bandi <c-hbandi@codeaurora.org>
Subject: [PATCH v2] Bluetooth: hci_qca: Add support for controller debug logs.
Date: Wed,  3 Oct 2018 20:41:44 +0530	[thread overview]
Message-ID: <20181003151144.10537-1-bgodavar@codeaurora.org> (raw)

This patch will prevent error messages splashing on console.

[   78.426697] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
[   78.436682] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
[   78.446639] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
[   78.456596] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804

QCA wcn3990 will send the debug logs in the form of ACL packets.
While decoding packet in qca_recv(), marking the received debug log
packet as diagnostic packet.

Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
v2: 
  * Addressed reviewer comments.
v1: 
  * initial patch
---
 drivers/bluetooth/hci_qca.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index d98ed0442201..63ac3c6b4149 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -63,6 +63,10 @@
 /* susclk rate */
 #define SUSCLK_RATE_32KHZ	32768
 
+/* Controller debug log header */
+#define QCA_DEBUG_HDR_MSB	0xDC
+#define QCA_DEBUG_HDR_LSB	0x2E
+
 /* HCI_IBS transmit side sleep protocol states */
 enum tx_ibs_states {
 	HCI_IBS_TX_ASLEEP,
@@ -849,6 +853,20 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
 	return 0;
 }
 
+static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	/* We receive debug logs from chip as an ACL packets.
+	 * Instead of sending the data to ACL to decode the
+	 * received data, we are pushing them to the above layers
+	 * as a diagnostic packet.
+	 */
+	if ((skb->len > 2) && (skb->data[0] == QCA_DEBUG_HDR_MSB) &&
+	    (skb->data[1] == QCA_DEBUG_HDR_LSB))
+		return hci_recv_diag(hdev, skb);
+
+	return hci_recv_frame(hdev, skb);
+}
+
 #define QCA_IBS_SLEEP_IND_EVENT \
 	.type = HCI_IBS_SLEEP_IND, \
 	.hlen = 0, \
@@ -871,7 +889,7 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
 	.maxlen = HCI_MAX_IBS_SIZE
 
 static const struct h4_recv_pkt qca_recv_pkts[] = {
-	{ H4_RECV_ACL,             .recv = hci_recv_frame    },
+	{ H4_RECV_ACL,             .recv = qca_recv_acl_data },
 	{ H4_RECV_SCO,             .recv = hci_recv_frame    },
 	{ H4_RECV_EVENT,           .recv = hci_recv_frame    },
 	{ QCA_IBS_WAKE_IND_EVENT,  .recv = qca_ibs_wake_ind  },
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


             reply	other threads:[~2018-10-03 15:12 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-03 15:11 Balakrishna Godavarthi [this message]
2018-10-03 16:56 ` [PATCH v2] Bluetooth: hci_qca: Add support for controller debug logs Marcel Holtmann
2018-10-16 14:02   ` Balakrishna Godavarthi
2018-10-16 14:35     ` Marcel Holtmann
2018-10-16 14:56       ` Balakrishna Godavarthi
2018-10-16 15:09         ` Marcel Holtmann
2018-10-16 15:19           ` Balakrishna Godavarthi
2018-10-16 15:31             ` Marcel Holtmann
2018-10-16 15:43               ` Balakrishna Godavarthi
2018-10-18  7:58                 ` Marcel Holtmann
2018-10-24 14:55                   ` Balakrishna Godavarthi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181003151144.10537-1-bgodavar@codeaurora.org \
    --to=bgodavar@codeaurora.org \
    --cc=c-hbandi@codeaurora.org \
    --cc=hemantg@codeaurora.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=mka@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.