All of lore.kernel.org
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@bootlin.com>
To: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Cc: <miquel.raynal@bootlin.com>, <richard@nod.at>,
	<dwmw2@infradead.org>, <computersforpeace@gmail.com>,
	<marek.vasut@gmail.com>,
	michals@xilinx.com, linux-mtd@lists.infradead.org,
	linux-kernel@vger.kernel.org, nagasuresh12@gmail.com
Subject: Re: [LINUX PATCH v11 2/3] mtd: rawnand: Add an option to get sdr timing mode number
Date: Wed, 3 Oct 2018 21:30:12 +0200	[thread overview]
Message-ID: <20181003213012.021cebed@bbrezillon> (raw)
In-Reply-To: <1537878031-22253-3-git-send-email-naga.sureshkumar.relli@xilinx.com>

On Tue, 25 Sep 2018 17:50:30 +0530
Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> wrote:

> Some NAND controllers needs sdr timing mode value, instead of

			^need SDR

> timings parameters. i.e the NAND controller will change its operating

	  s/parameters//

> mode by just configuring the sdr timing mode number. so add mode parameter

							^ So, add a mode field 

> in struct nand_sdr_timings.

  ^ to ...

> 
> Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
> ---
> Changes in v11:
>  - None
> ---
>  drivers/mtd/nand/raw/nand_timings.c | 6 ++++++
>  include/linux/mtd/rawnand.h         | 2 ++
>  2 files changed, 8 insertions(+)
> 
> diff --git a/drivers/mtd/nand/raw/nand_timings.c b/drivers/mtd/nand/raw/nand_timings.c
> index ebc7b5f..1ec7a28 100644
> --- a/drivers/mtd/nand/raw/nand_timings.c
> +++ b/drivers/mtd/nand/raw/nand_timings.c
> @@ -56,6 +56,7 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
>  			.tWHR_min = 120000,
>  			.tWP_min = 50000,
>  			.tWW_min = 100000,
> +			.mode = 0,
>  		},
>  	},
>  	/* Mode 1 */
> @@ -98,6 +99,7 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
>  			.tWHR_min = 80000,
>  			.tWP_min = 25000,
>  			.tWW_min = 100000,
> +			.mode = 1,
>  		},
>  	},
>  	/* Mode 2 */
> @@ -140,6 +142,7 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
>  			.tWHR_min = 80000,
>  			.tWP_min = 17000,
>  			.tWW_min = 100000,
> +			.mode = 2,
>  		},
>  	},
>  	/* Mode 3 */
> @@ -182,6 +185,7 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
>  			.tWHR_min = 80000,
>  			.tWP_min = 15000,
>  			.tWW_min = 100000,
> +			.mode = 3,
>  		},
>  	},
>  	/* Mode 4 */
> @@ -224,6 +228,7 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
>  			.tWHR_min = 80000,
>  			.tWP_min = 12000,
>  			.tWW_min = 100000,
> +			.mode = 4,
>  		},
>  	},
>  	/* Mode 5 */
> @@ -266,6 +271,7 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
>  			.tWHR_min = 80000,
>  			.tWP_min = 10000,
>  			.tWW_min = 100000,
> +			.mode = 5,
>  		},
>  	},
>  };
> diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
> index efb2345..3bf2cea 100644
> --- a/include/linux/mtd/rawnand.h
> +++ b/include/linux/mtd/rawnand.h
> @@ -723,6 +723,7 @@ struct nand_ecc_ctrl {
>   * @tWHR_min: WE# high to RE# low
>   * @tWP_min: WE# pulse width
>   * @tWW_min: WP# transition to WE# low
> + * @mode: sdr timing mode value

      @mode: ONFI timing mode

>   */
>  struct nand_sdr_timings {
>  	u64 tBERS_max;
> @@ -763,6 +764,7 @@ struct nand_sdr_timings {
>  	u32 tWHR_min;
>  	u32 tWP_min;
>  	u32 tWW_min;
> +	u8 mode;
>  };
>  
>  /**

With this addressed, you can add

Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

  reply	other threads:[~2018-10-03 19:30 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-25 12:20 [LINUX PATCH v11 0/3] Add support for Arasan NAND Flash controller Naga Sureshkumar Relli
2018-09-25 12:20 ` [LINUX PATCH v11 1/3] dt-bindings: mtd: arasan: Add device tree binding documentation Naga Sureshkumar Relli
2018-09-26 13:18   ` Rob Herring
2018-09-27 10:57     ` Naga Sureshkumar Relli
2018-09-25 12:20 ` [LINUX PATCH v11 2/3] mtd: rawnand: Add an option to get sdr timing mode number Naga Sureshkumar Relli
2018-10-03 19:30   ` Boris Brezillon [this message]
2018-09-25 12:20 ` [LINUX PATCH v11 3/3] mtd: rawnand: arasan: Add support for Arasan NAND Flash Controller Naga Sureshkumar Relli
2018-10-03 19:38   ` Boris Brezillon
2018-10-19  9:44     ` Naga Sureshkumar Relli
2018-10-03 19:46   ` Boris Brezillon
2018-10-19  9:47     ` Naga Sureshkumar Relli
2018-10-29  9:51 ` [LINUX PATCH v11 0/3] Add support for Arasan NAND Flash controller Miquel Raynal
2018-10-29 13:05   ` Naga Sureshkumar Relli
2018-10-29 13:22     ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181003213012.021cebed@bbrezillon \
    --to=boris.brezillon@bootlin.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=michals@xilinx.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=naga.sureshkumar.relli@xilinx.com \
    --cc=nagasuresh12@gmail.com \
    --cc=richard@nod.at \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.