diff for duplicates of <20181007161808.44a61d45@archlinux> diff --git a/a/1.txt b/N1/1.txt index f8de0bf..c486097 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -5,11 +5,9 @@ Song Qiang <songqiang1304521@gmail.com> wrote: > --- > .../bindings/iio/magnetometer/pni,rm3100.txt | 20 +++++++++++++++++++ > 1 file changed, 20 insertions(+) -> create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/pn= -i,rm3100.txt ->=20 -> diff --git a/Documentation/devicetree/bindings/iio/magnetometer/pni,rm310= -0.txt b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt +> create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt +> +> diff --git a/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt > new file mode 100644 > index 000000000000..4677690fc5d0 > --- /dev/null @@ -26,7 +24,7 @@ i,rm3100.txt > + > +- interrupts: data ready (DRDY) from the chip. > + The interrupts can be triggered on rising edges. -=46rom Phil's response this appears to be incorrect and +From Phil's response this appears to be incorrect and it's actually a level sensitive interrupt. I haven't checked the data sheet to confirm this. @@ -51,8 +49,8 @@ Jonathan > +Example: > + > +rm3100: rm3100@20 { -> + compatible =3D "pni,rm3100"; -> + reg =3D <0x20>; -> + interrupt-parent =3D <&gpio0>; -> + interrupts =3D <4 IRQ_TYPE_EDGE_RISING>; +> + compatible = "pni,rm3100"; +> + reg = <0x20>; +> + interrupt-parent = <&gpio0>; +> + interrupts = <4 IRQ_TYPE_EDGE_RISING>; > +}; diff --git a/a/content_digest b/N1/content_digest index d27b253..432fa6b 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -23,11 +23,9 @@ "> ---\n" "> .../bindings/iio/magnetometer/pni,rm3100.txt | 20 +++++++++++++++++++\n" "> 1 file changed, 20 insertions(+)\n" - "> create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/pn=\n" - "i,rm3100.txt\n" - ">=20\n" - "> diff --git a/Documentation/devicetree/bindings/iio/magnetometer/pni,rm310=\n" - "0.txt b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt\n" + "> create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt\n" + "> \n" + "> diff --git a/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt\n" "> new file mode 100644\n" "> index 000000000000..4677690fc5d0\n" "> --- /dev/null\n" @@ -44,7 +42,7 @@ "> +\n" "> +- interrupts: data ready (DRDY) from the chip.\n" "> + The interrupts can be triggered on rising edges.\n" - "=46rom Phil's response this appears to be incorrect and\n" + "From Phil's response this appears to be incorrect and\n" "it's actually a level sensitive interrupt.\n" "I haven't checked the data sheet to confirm this.\n" "\n" @@ -69,10 +67,10 @@ "> +Example:\n" "> +\n" "> +rm3100: rm3100@20 {\n" - "> +\tcompatible =3D \"pni,rm3100\";\n" - "> +\treg =3D <0x20>;\n" - "> +\tinterrupt-parent =3D <&gpio0>;\n" - "> +\tinterrupts =3D <4 IRQ_TYPE_EDGE_RISING>;\n" + "> +\tcompatible = \"pni,rm3100\";\n" + "> +\treg = <0x20>;\n" + "> +\tinterrupt-parent = <&gpio0>;\n" + "> +\tinterrupts = <4 IRQ_TYPE_EDGE_RISING>;\n" > +}; -970db42fdf3bfad26534b23a3a0a9884e3f64876baed6f501917ed1b6e9f3657 +fadcfa3a401642a780048a1f31dfef2d2ec5fffd6e47f231024433c0b1bf4c89
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.