From: Boris Brezillon <boris.brezillon@bootlin.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command
Date: Mon, 8 Oct 2018 19:46:27 +0200 [thread overview]
Message-ID: <20181008194627.71352d73@bbrezillon> (raw)
In-Reply-To: <20181001134331.9756-6-miquel.raynal@bootlin.com>
On Mon, 1 Oct 2018 15:43:29 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:
> +#if defined(CONFIG_MTD_PARTITIONS)
> +int mtd_probe_devices(void)
> +{
> + static char *old_mtdparts;
> + static char *old_mtdids;
> + const char *mtdparts = env_get("mtdparts");
> + const char *mtdids = env_get("mtdids");
> + bool remaining_partitions = true;
> + struct mtd_info *mtd;
> +
> + mtd_probe_uclass_mtd_devs();
> +
> + /* Check if mtdparts/mtdids changed since last call, otherwise: exit */
> + if (!strcmp(mtdparts, old_mtdparts) && !strcmp(mtdids, old_mtdids))
> + return 0;
Should be:
if ((!mtdparts && !old_mtdparts && !mtdids && !old_mtdids) ||
(mtdparts && old_mtdparts && mtdids && old_mtdids &&
!strcmp(mtdparts, old_mtdparts) &&
!strcmp(mtdids, old_mtdids)))
return 0;
> +
> + /* Update the local copy of mtdparts */
> + free(old_mtdparts);
> + free(old_mtdids);
> + old_mtdparts = strdup(mtdparts);
> + old_mtdids = strdup(mtdids);
> +
> + /* If at least one partition is still in use, do not delete anything */
> + mtd_for_each_device(mtd) {
> + if (mtd->usecount) {
> + printf("Partition \"%s\" already in use, aborting\n",
> + mtd->name);
> + return -EACCES;
> + }
> + }
> +
> + /*
> + * Everything looks clear, remove all partitions. It is not safe to
> + * remove entries from the mtd_for_each_device loop as it uses idr
> + * indexes and the partitions removal is done in bulk (all partitions of
> + * one device at the same time), so break and iterate from start each
> + * time a new partition is found and deleted.
> + */
> + while (remaining_partitions) {
> + remaining_partitions = false;
> + mtd_for_each_device(mtd) {
> + if (!mtd_is_partition(mtd) && mtd_has_partitions(mtd)) {
> + del_mtd_partitions(mtd);
> + remaining_partitions = true;
> + break;
> + }
> + }
> + }
> +
We should bail out if either mtdparts or mtdids is NULL:
if (!mtdparts || !mtdids)
return 0;
> + /* Start the parsing by ignoring the extra 'mtdparts=' prefix, if any */
> + if (strstr(mtdparts, "mtdparts="))
> + mtdparts += 9;
> +
> + /* For each MTD device in mtdparts */
> + while (mtdparts[0] != '\0') {
> + char mtd_name[MTD_NAME_MAX_LEN], *colon;
> + struct mtd_partition *parts;
> + int mtd_name_len, nparts;
> + int ret;
> +
> + colon = strchr(mtdparts, ':');
> + if (!colon) {
> + printf("Wrong mtdparts: %s\n", mtdparts);
> + return -EINVAL;
> + }
> +
> + mtd_name_len = colon - mtdparts;
> + strncpy(mtd_name, mtdparts, mtd_name_len);
> + mtd_name[mtd_name_len] = '\0';
> + /* Move the pointer forward (including the ':') */
> + mtdparts += mtd_name_len + 1;
> + mtd = get_mtd_device_nm(mtd_name);
> + if (IS_ERR_OR_NULL(mtd)) {
> + char linux_name[MTD_NAME_MAX_LEN];
> +
> + /*
> + * The MTD device named "mtd_name" does not exist. Try
> + * to find a correspondance with an MTD device having
> + * the same type and number as defined in the mtdids.
> + */
> + debug("No device named %s\n", mtd_name);
> + ret = mtd_search_alternate_name(mtd_name, linux_name,
> + MTD_NAME_MAX_LEN);
> + if (!ret)
> + mtd = get_mtd_device_nm(linux_name);
> +
> + /*
> + * If no device could be found, move the mtdparts
> + * pointer forward until the next set of partitions.
> + */
> + if (ret || IS_ERR_OR_NULL(mtd)) {
> + printf("Could not find a valid device for %s\n",
> + mtd_name);
> + mtdparts = strchr(mtdparts, ';');
> + if (mtdparts)
> + mtdparts++;
> +
> + continue;
> + }
> + }
> +
> + /*
> + * Parse the MTD device partitions. It will update the mtdparts
> + * pointer, create an array of parts (that must be freed), and
> + * return the number of partition structures in the array.
> + */
> + ret = mtd_parse_partitions(mtd, &mtdparts, &parts, &nparts);
> + if (ret) {
> + printf("Could not parse device %s\n", mtd->name);
> + put_mtd_device(mtd);
> + return -EINVAL;
> + }
> +
> + if (!nparts)
> + continue;
> +
> + /* Create the new MTD partitions */
> + add_mtd_partitions(mtd, parts, nparts);
> +
> + /* Free the structures allocated during the parsing */
> + mtd_free_parsed_partitions(parts, nparts);
> +
> + put_mtd_device(mtd);
> + }
> +
> + return 0;
> +}
next prev parent reply other threads:[~2018-10-08 17:46 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-01 13:43 [U-Boot] [PATCH v13 0/7] SPI-NAND support (third batch) Miquel Raynal
2018-10-01 13:43 ` [U-Boot] [PATCH v13 1/7] mtd: uclass: add probe function Miquel Raynal
2018-10-01 13:43 ` [U-Boot] [PATCH v13 2/7] mtd: mtdpart: add a generic mtdparts-like parser Miquel Raynal
2018-10-01 13:43 ` [U-Boot] [PATCH v13 3/7] mtd: uboot: search for an equivalent MTD name with the mtdids Miquel Raynal
2018-10-01 13:43 ` [U-Boot] [PATCH v13 4/7] mtd: mtdpart: implement proper partition handling Miquel Raynal
2018-10-01 13:43 ` [U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Miquel Raynal
2018-10-01 16:19 ` Jagan Teki
2018-10-01 20:39 ` Miquel Raynal
2018-10-03 12:35 ` Adam Ford
2018-10-03 12:42 ` Miquel Raynal
2018-10-03 12:47 ` Adam Ford
2018-10-03 12:57 ` Miquel Raynal
2018-10-03 13:35 ` Miquel Raynal
2018-10-03 13:41 ` Adam Ford
2018-10-08 16:13 ` Adam Ford
2018-10-08 16:28 ` Boris Brezillon
2018-10-08 16:52 ` Adam Ford
2018-10-08 16:58 ` Adam Ford
2018-10-08 17:27 ` Boris Brezillon
2018-10-08 17:46 ` Boris Brezillon [this message]
2018-10-08 18:26 ` Adam Ford
2018-10-08 19:07 ` Thomas Petazzoni
2018-10-08 19:14 ` Adam Ford
2018-10-01 13:43 ` [U-Boot] [PATCH v13 6/7] cmd: ubi: clean the partition handling Miquel Raynal
2018-10-01 13:43 ` [U-Boot] [PATCH v13 7/7] cmd: mtdparts: describe as legacy Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181008194627.71352d73@bbrezillon \
--to=boris.brezillon@bootlin.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.