From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Tue, 9 Oct 2018 08:59:12 +0200 Subject: [U-Boot] [PATCH 10/14] mips: mt76xx: gardena-smart-gateway: Add LEDs to dts In-Reply-To: <20181009065916.31977-1-sr@denx.de> References: <20181009065916.31977-1-sr@denx.de> Message-ID: <20181009065916.31977-10-sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Add the available LEDs to the DTS file so that they can be used. Signed-off-by: Stefan Roese Cc: Daniel Schwierzeck --- .../mips/dts/gardena-smart-gateway-mt7688.dts | 59 +++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/arch/mips/dts/gardena-smart-gateway-mt7688.dts b/arch/mips/dts/gardena-smart-gateway-mt7688.dts index ee99c3d17c..ef8a9612fd 100644 --- a/arch/mips/dts/gardena-smart-gateway-mt7688.dts +++ b/arch/mips/dts/gardena-smart-gateway-mt7688.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "mt7628a.dtsi" +#include / { compatible = "gardena,smart-gateway-mt7688", "ralink,mt7628a-soc"; @@ -21,6 +22,64 @@ reg = <0x0 0x08000000>; }; + leds { + compatible = "gpio-leds"; + + power_blue { + label = "smartgw:power:blue"; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + power_green { + label = "smartgw:power:green"; + gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + power_red { + label = "smartgw:power:red"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_blue { + label = "smartgw:radio:blue"; + gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_green { + label = "smartgw:radio:green"; + gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_red { + label = "smartgw:radio:red"; + gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_blue { + label = "smartgw:internet:blue"; + gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_green { + label = "smartgw:internet:green"; + gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_red { + label = "smartgw:internet:red"; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + chosen { bootargs = "console=ttyS0,57600"; stdout-path = &uart0; -- 2.19.1