From: "Daniel P. Berrangé" <berrange@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Daniel P. Berrangé" <berrange@redhat.com>,
"Alberto Garcia" <berto@igalia.com>
Subject: [Qemu-devel] [PATCH 3/6] crypto: introduce a xts_uint128 data type
Date: Tue, 9 Oct 2018 13:55:38 +0100 [thread overview]
Message-ID: <20181009125541.24455-4-berrange@redhat.com> (raw)
In-Reply-To: <20181009125541.24455-1-berrange@redhat.com>
The new type is designed to allow use of 64-bit arithmetic instead
of operating 1-byte at a time. The following patches will use this to
improve performance.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
---
crypto/xts.c | 45 +++++++++++++++++++++++++--------------------
1 file changed, 25 insertions(+), 20 deletions(-)
diff --git a/crypto/xts.c b/crypto/xts.c
index 3c1a92f01d..ded4365191 100644
--- a/crypto/xts.c
+++ b/crypto/xts.c
@@ -26,6 +26,11 @@
#include "qemu/osdep.h"
#include "crypto/xts.h"
+typedef struct {
+ uint64_t a;
+ uint64_t b;
+} xts_uint128;
+
static void xts_mult_x(uint8_t *I)
{
int x;
@@ -85,7 +90,7 @@ void xts_decrypt(const void *datactx,
uint8_t *dst,
const uint8_t *src)
{
- uint8_t PP[XTS_BLOCK_SIZE], CC[XTS_BLOCK_SIZE], T[XTS_BLOCK_SIZE];
+ xts_uint128 PP, CC, T;
unsigned long i, m, mo, lim;
/* get number of blocks */
@@ -102,10 +107,10 @@ void xts_decrypt(const void *datactx,
}
/* encrypt the iv */
- encfunc(tweakctx, XTS_BLOCK_SIZE, T, iv);
+ encfunc(tweakctx, XTS_BLOCK_SIZE, (uint8_t *)&T, iv);
for (i = 0; i < lim; i++) {
- xts_tweak_encdec(datactx, decfunc, src, dst, T);
+ xts_tweak_encdec(datactx, decfunc, src, dst, (uint8_t *)&T);
src += XTS_BLOCK_SIZE;
dst += XTS_BLOCK_SIZE;
@@ -113,27 +118,27 @@ void xts_decrypt(const void *datactx,
/* if length is not a multiple of XTS_BLOCK_SIZE then */
if (mo > 0) {
- memcpy(CC, T, XTS_BLOCK_SIZE);
- xts_mult_x(CC);
+ memcpy(&CC, &T, XTS_BLOCK_SIZE);
+ xts_mult_x((uint8_t *)&CC);
/* PP = tweak decrypt block m-1 */
- xts_tweak_encdec(datactx, decfunc, src, PP, CC);
+ xts_tweak_encdec(datactx, decfunc, src, (uint8_t *)&PP, (uint8_t *)&CC);
/* Pm = first length % XTS_BLOCK_SIZE bytes of PP */
for (i = 0; i < mo; i++) {
- CC[i] = src[XTS_BLOCK_SIZE + i];
- dst[XTS_BLOCK_SIZE + i] = PP[i];
+ ((uint8_t *)&CC)[i] = src[XTS_BLOCK_SIZE + i];
+ dst[XTS_BLOCK_SIZE + i] = ((uint8_t *)&PP)[i];
}
for (; i < XTS_BLOCK_SIZE; i++) {
- CC[i] = PP[i];
+ ((uint8_t *)&CC)[i] = ((uint8_t *)&PP)[i];
}
/* Pm-1 = Tweak uncrypt CC */
- xts_tweak_encdec(datactx, decfunc, CC, dst, T);
+ xts_tweak_encdec(datactx, decfunc, (uint8_t *)&CC, dst, (uint8_t *)&T);
}
/* Decrypt the iv back */
- decfunc(tweakctx, XTS_BLOCK_SIZE, iv, T);
+ decfunc(tweakctx, XTS_BLOCK_SIZE, iv, (uint8_t *)&T);
}
@@ -146,7 +151,7 @@ void xts_encrypt(const void *datactx,
uint8_t *dst,
const uint8_t *src)
{
- uint8_t PP[XTS_BLOCK_SIZE], CC[XTS_BLOCK_SIZE], T[XTS_BLOCK_SIZE];
+ xts_uint128 PP, CC, T;
unsigned long i, m, mo, lim;
/* get number of blocks */
@@ -163,10 +168,10 @@ void xts_encrypt(const void *datactx,
}
/* encrypt the iv */
- encfunc(tweakctx, XTS_BLOCK_SIZE, T, iv);
+ encfunc(tweakctx, XTS_BLOCK_SIZE, (uint8_t *)&T, iv);
for (i = 0; i < lim; i++) {
- xts_tweak_encdec(datactx, encfunc, src, dst, T);
+ xts_tweak_encdec(datactx, encfunc, src, dst, (uint8_t *)&T);
dst += XTS_BLOCK_SIZE;
src += XTS_BLOCK_SIZE;
@@ -175,22 +180,22 @@ void xts_encrypt(const void *datactx,
/* if length is not a multiple of XTS_BLOCK_SIZE then */
if (mo > 0) {
/* CC = tweak encrypt block m-1 */
- xts_tweak_encdec(datactx, encfunc, src, CC, T);
+ xts_tweak_encdec(datactx, encfunc, src, (uint8_t *)&CC, (uint8_t *)&T);
/* Cm = first length % XTS_BLOCK_SIZE bytes of CC */
for (i = 0; i < mo; i++) {
- PP[i] = src[XTS_BLOCK_SIZE + i];
- dst[XTS_BLOCK_SIZE + i] = CC[i];
+ ((uint8_t *)&PP)[i] = src[XTS_BLOCK_SIZE + i];
+ dst[XTS_BLOCK_SIZE + i] = ((uint8_t *)&CC)[i];
}
for (; i < XTS_BLOCK_SIZE; i++) {
- PP[i] = CC[i];
+ ((uint8_t *)&PP)[i] = ((uint8_t *)&CC)[i];
}
/* Cm-1 = Tweak encrypt PP */
- xts_tweak_encdec(datactx, encfunc, PP, dst, T);
+ xts_tweak_encdec(datactx, encfunc, (uint8_t *)&PP, dst, (uint8_t *)&T);
}
/* Decrypt the iv back */
- decfunc(tweakctx, XTS_BLOCK_SIZE, iv, T);
+ decfunc(tweakctx, XTS_BLOCK_SIZE, iv, (uint8_t *)&T);
}
--
2.17.1
next prev parent reply other threads:[~2018-10-09 12:56 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-09 12:55 [Qemu-devel] [PATCH 0/6] crypto: improve performance of XTS cipher mode Daniel P. Berrangé
2018-10-09 12:55 ` [Qemu-devel] [PATCH 1/6] crypto: expand algorithm coverage for cipher benchmark Daniel P. Berrangé
2018-10-09 14:04 ` Marc-André Lureau
2018-10-10 11:45 ` Alberto Garcia
2018-10-09 12:55 ` [Qemu-devel] [PATCH 2/6] crypto: remove code duplication in tweak encrypt/decrypt Daniel P. Berrangé
2018-10-09 13:43 ` Alberto Garcia
2018-10-09 13:51 ` Marc-André Lureau
2018-10-09 12:55 ` Daniel P. Berrangé [this message]
2018-10-09 14:40 ` [Qemu-devel] [PATCH 3/6] crypto: introduce a xts_uint128 data type Alberto Garcia
2018-10-09 14:50 ` Alberto Garcia
2018-10-09 14:58 ` Daniel P. Berrangé
2018-10-09 15:14 ` Alberto Garcia
2018-10-09 12:55 ` [Qemu-devel] [PATCH 4/6] crypto: convert xts_tweak_encdec to use xts_uint128 type Daniel P. Berrangé
2018-10-09 15:02 ` Alberto Garcia
2018-10-09 15:06 ` Daniel P. Berrangé
2018-10-09 15:30 ` Alberto Garcia
2018-10-09 15:31 ` Daniel P. Berrangé
2018-10-11 12:16 ` Alberto Garcia
2018-10-09 12:55 ` [Qemu-devel] [PATCH 5/6] crypto: convert xts_mult_x " Daniel P. Berrangé
2018-10-09 13:52 ` Alberto Garcia
2018-10-09 13:55 ` Daniel P. Berrangé
2018-10-09 14:25 ` Alberto Garcia
2018-10-09 12:55 ` [Qemu-devel] [PATCH 6/6] crypto: annotate xts_tweak_encdec as inlineable Daniel P. Berrangé
2018-10-09 15:37 ` Alberto Garcia
2018-10-09 13:59 ` [Qemu-devel] [PATCH 0/6] crypto: improve performance of XTS cipher mode Marc-André Lureau
2018-10-09 14:13 ` Daniel P. Berrangé
2018-10-09 14:27 ` Marc-André Lureau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181009125541.24455-4-berrange@redhat.com \
--to=berrange@redhat.com \
--cc=berto@igalia.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.