From: Angelo Dureghello <angelo@sysam.it>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 01/11] m68k: add basic set of devicetrees
Date: Tue, 9 Oct 2018 23:43:03 +0200 [thread overview]
Message-ID: <20181009214313.27034-2-angelo@sysam.it> (raw)
In-Reply-To: <20181009214313.27034-1-angelo@sysam.it>
This patch adds a basic group of devicetrees, one for each
cpu family, including actually just uart and dspi devices,
since these are the drivers supporting devicetree (support
added in this patch-set).
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
Changes for v2:
- add mcf54xx.dtsi and mcf537x.dtsi
---
arch/m68k/dts/mcf5208.dtsi | 36 ++++++++
arch/m68k/dts/mcf5227x.dtsi | 48 ++++++++++
arch/m68k/dts/mcf523x.dtsi | 44 ++++++++++
arch/m68k/dts/mcf5249.dtsi | 38 ++++++++
arch/m68k/dts/mcf5253.dtsi | 44 ++++++++++
arch/m68k/dts/mcf5271.dtsi | 44 ++++++++++
arch/m68k/dts/mcf5272.dtsi | 38 ++++++++
arch/m68k/dts/mcf5275.dtsi | 44 ++++++++++
arch/m68k/dts/mcf5282.dtsi | 44 ++++++++++
arch/m68k/dts/mcf5301x.dtsi | 48 ++++++++++
arch/m68k/dts/mcf5307.dtsi | 39 +++++++++
arch/m68k/dts/mcf5329.dtsi | 36 ++++++++
arch/m68k/dts/mcf537x.dtsi | 36 ++++++++
arch/m68k/dts/mcf5441x.dtsi | 87 +++++++++++++++++++
arch/m68k/dts/mcf5445x.dtsi | 48 ++++++++++
arch/m68k/dts/mcf54xx.dtsi | 40 +++++++++
doc/device-tree-bindings/serial/mcf-uart.txt | 19 ++++
doc/device-tree-bindings/spi/spi-mcf-dspi.txt | 30 +++++++
18 files changed, 763 insertions(+)
create mode 100644 arch/m68k/dts/mcf5208.dtsi
create mode 100644 arch/m68k/dts/mcf5227x.dtsi
create mode 100644 arch/m68k/dts/mcf523x.dtsi
create mode 100644 arch/m68k/dts/mcf5249.dtsi
create mode 100644 arch/m68k/dts/mcf5253.dtsi
create mode 100644 arch/m68k/dts/mcf5271.dtsi
create mode 100644 arch/m68k/dts/mcf5272.dtsi
create mode 100644 arch/m68k/dts/mcf5275.dtsi
create mode 100644 arch/m68k/dts/mcf5282.dtsi
create mode 100644 arch/m68k/dts/mcf5301x.dtsi
create mode 100644 arch/m68k/dts/mcf5307.dtsi
create mode 100644 arch/m68k/dts/mcf5329.dtsi
create mode 100644 arch/m68k/dts/mcf537x.dtsi
create mode 100644 arch/m68k/dts/mcf5441x.dtsi
create mode 100644 arch/m68k/dts/mcf5445x.dtsi
create mode 100644 arch/m68k/dts/mcf54xx.dtsi
create mode 100644 doc/device-tree-bindings/serial/mcf-uart.txt
create mode 100644 doc/device-tree-bindings/spi/spi-mcf-dspi.txt
diff --git a/arch/m68k/dts/mcf5208.dtsi b/arch/m68k/dts/mcf5208.dtsi
new file mode 100644
index 0000000000..558d8bf41a
--- /dev/null
+++ b/arch/m68k/dts/mcf5208.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5208";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart at fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5227x.dtsi b/arch/m68k/dts/mcf5227x.dtsi
new file mode 100644
index 0000000000..8c95edddb6
--- /dev/null
+++ b/arch/m68k/dts/mcf5227x.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5227x";
+
+ aliases {
+ serial0 = &uart0;
+ spi0 = &dspi0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart at fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+
+ dspi0: dspi at fc05c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc05c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf523x.dtsi b/arch/m68k/dts/mcf523x.dtsi
new file mode 100644
index 0000000000..9e79d472ec
--- /dev/null
+++ b/arch/m68k/dts/mcf523x.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf523x";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ipsbar: ipsbar at 4000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40000000 0x40000000>;
+ reg = <0x40000000 0x40000000>;
+
+ uart0: uart at 200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at 240 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x240 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at 280 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x280 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5249.dtsi b/arch/m68k/dts/mcf5249.dtsi
new file mode 100644
index 0000000000..248b3dc68b
--- /dev/null
+++ b/arch/m68k/dts/mcf5249.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5249";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mbar: mbar at 10000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x10000000 0x10000>;
+ reg = <0x10000000 0x10000>;
+
+ uart0: uart at 1c0 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x1c0 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at 200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5253.dtsi b/arch/m68k/dts/mcf5253.dtsi
new file mode 100644
index 0000000000..3bde2d6202
--- /dev/null
+++ b/arch/m68k/dts/mcf5253.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5253";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mbar: mbar at 10000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x10000000 0x10000>;
+ reg = <0x10000000 0x10000>;
+
+ uart0: uart at 1c0 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x1c0 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at 200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+
+ uart3: uart at c00 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xc00 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5271.dtsi b/arch/m68k/dts/mcf5271.dtsi
new file mode 100644
index 0000000000..29355528d0
--- /dev/null
+++ b/arch/m68k/dts/mcf5271.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5271";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ipsbar: ipsbar at 4000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40000000 0x40000000>;
+ reg = <0x40000000 0x40000000>;
+
+ uart0: uart at 200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at 240 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x240 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at 280 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x280 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5272.dtsi b/arch/m68k/dts/mcf5272.dtsi
new file mode 100644
index 0000000000..a56117728b
--- /dev/null
+++ b/arch/m68k/dts/mcf5272.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5272";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mbar: mbar at 10000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x10000000 0x10000>;
+ reg = <0x10000000 0x10000>;
+
+ uart0: uart at 100 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x100 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at 140 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x140 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5275.dtsi b/arch/m68k/dts/mcf5275.dtsi
new file mode 100644
index 0000000000..b375609d4a
--- /dev/null
+++ b/arch/m68k/dts/mcf5275.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5275";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ipsbar: ipsbar at 4000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40000000 0x40000000>;
+ reg = <0x40000000 0x40000000>;
+
+ uart0: uart at 200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at 240 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x240 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at 280 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x280 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5282.dtsi b/arch/m68k/dts/mcf5282.dtsi
new file mode 100644
index 0000000000..3ad1be7bb5
--- /dev/null
+++ b/arch/m68k/dts/mcf5282.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5282";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ipsbar: ipsbar at 4000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40000000 0x40000000>;
+ reg = <0x40000000 0x40000000>;
+
+ uart0: uart at 200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at 240 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x240 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at 280 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x280 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5301x.dtsi b/arch/m68k/dts/mcf5301x.dtsi
new file mode 100644
index 0000000000..0891e4dfd5
--- /dev/null
+++ b/arch/m68k/dts/mcf5301x.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5301x";
+
+ aliases {
+ serial0 = &uart0;
+ spi0 = &dspi0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart at fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+
+ dspi0: dspi at fc05c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc05c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5307.dtsi b/arch/m68k/dts/mcf5307.dtsi
new file mode 100644
index 0000000000..e199cf9991
--- /dev/null
+++ b/arch/m68k/dts/mcf5307.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5307";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* MBAR */
+ mbar: mbar at 10000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x10000000 0x10000>;
+ reg = <0x10000000 0x10000>;
+
+ uart0: uart at 1c0 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x1c0 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at 200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5329.dtsi b/arch/m68k/dts/mcf5329.dtsi
new file mode 100644
index 0000000000..aeaa6430af
--- /dev/null
+++ b/arch/m68k/dts/mcf5329.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5329";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart at fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf537x.dtsi b/arch/m68k/dts/mcf537x.dtsi
new file mode 100644
index 0000000000..aeaa6430af
--- /dev/null
+++ b/arch/m68k/dts/mcf537x.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5329";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart at fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5441x.dtsi b/arch/m68k/dts/mcf5441x.dtsi
new file mode 100644
index 0000000000..71b392adc3
--- /dev/null
+++ b/arch/m68k/dts/mcf5441x.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5441x";
+
+ aliases {
+ serial0 = &uart0;
+ spi0 = &dspi0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart at fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+
+ uart3: uart at fc06c000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc06c000 0x40>;
+ status = "disabled";
+ };
+
+ dspi0: dspi at fc05c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc05c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+
+ dspi1: dspi at fc03c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc03c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+
+ dspi2: dspi at ec038000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xec038000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+
+ dspi3: dspi at ec03c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xec03c00 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5445x.dtsi b/arch/m68k/dts/mcf5445x.dtsi
new file mode 100644
index 0000000000..ccbee29a6c
--- /dev/null
+++ b/arch/m68k/dts/mcf5445x.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5445x";
+
+ aliases {
+ serial0 = &uart0;
+ spi0 = &dspi0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart at fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+
+ dspi0: dspi at fc05c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc05c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf54xx.dtsi b/arch/m68k/dts/mcf54xx.dtsi
new file mode 100644
index 0000000000..537bb424f3
--- /dev/null
+++ b/arch/m68k/dts/mcf54xx.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf54x5";
+
+ aliases {
+ /* TO DO, clarify on serial, this SoC seems to have SPC and
+ * no UARTS.
+ */
+ spi0 = &dspi0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mbar: mbar at 80000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x80000000 0x10000>;
+ reg = <0x80000000 0x10000>;
+
+ dspi0: dspi at 8a00 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x8a00 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/doc/device-tree-bindings/serial/mcf-uart.txt b/doc/device-tree-bindings/serial/mcf-uart.txt
new file mode 100644
index 0000000000..d73f764c01
--- /dev/null
+++ b/doc/device-tree-bindings/serial/mcf-uart.txt
@@ -0,0 +1,19 @@
+Freescale ColdFire UART
+
+Required properties:
+- compatible : should be "fsl,mcf-uart"
+- reg: start address and size of the registers
+
+Example:
+
+soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart at fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+};
diff --git a/doc/device-tree-bindings/spi/spi-mcf-dspi.txt b/doc/device-tree-bindings/spi/spi-mcf-dspi.txt
new file mode 100644
index 0000000000..860eb8ac85
--- /dev/null
+++ b/doc/device-tree-bindings/spi/spi-mcf-dspi.txt
@@ -0,0 +1,30 @@
+Freescale ColdFire DSPI controller
+
+Required properties:
+- compatible : "fsl,mcf-dspi"
+- #address-cells: <1>, as required by generic SPI binding
+- #size-cells: <0>, also as required by generic SPI binding
+- reg : offset and length of the register set for the device
+
+Optional properties:
+- spi-max-frequency : max supported spi frequency
+- num-cs : the number of the chipselect signals
+- spi-mode: spi motorola mode, 0 to 3
+- ctar-params: CTAR0 to 7 register configuration, as an array
+ of 8 integer fields for each register, where each register
+ is defined as: <fmsz, pcssck, pasc, pdt, cssck, asc, dt, br>.
+
+Example:
+
+dspi0: dspi at fc05c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc05c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ ctar-fields = <7, 0, 0, 0, 0, 0, 1, 6>,
+ <7, 0, 0, 0, 0, 0, 1, 6>,
+ <7, 0, 0, 0, 0, 0, 1, 6>;
+};
--
2.19.1
next prev parent reply other threads:[~2018-10-09 21:43 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-09 21:43 [U-Boot] [PATCH v2 00/11] m68k: initial devicetree support Angelo Dureghello
2018-10-09 21:43 ` Angelo Dureghello [this message]
2018-10-10 5:49 ` [U-Boot] [PATCH v2 01/11] m68k: add basic set of devicetrees Jagan Teki
2018-10-10 9:38 ` Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 02/11] drivers: spi: cf_spi: add Kconfig option Angelo Dureghello
2018-10-10 5:51 ` Jagan Teki
2018-10-10 9:40 ` Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 03/11] drivers: spi: cf_spi: migrate to DM and DT Angelo Dureghello
2018-10-10 5:58 ` Jagan Teki
2018-10-10 9:57 ` Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 04/11] drivers: serial: mcfuart: add DT support Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 05/11] drivers: serial: mcfuart: add Kconfig option Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 06/11] m68k: architecture changes to support fdt Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 07/11] m68k: add initial dts files for all m68k boards Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 08/11] m68k: enabling long jumps on mcf54x5 SoCs Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 09/11] configs: enable use of DT for all m68k boards Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 10/11] configs: add DM_SPI config option Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 11/11] configs: remove CONFIG_SYS_DSPI_XX references Angelo Dureghello
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181009214313.27034-2-angelo@sysam.it \
--to=angelo@sysam.it \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.