diff for duplicates of <20181011222229.GA7470@bogus>

diff --git a/a/1.txt b/N1/1.txt
index 11f54fb..6ac1ed9 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -1,5 +1,5 @@
-On Wed, Sep 26, 2018 at 09:31:02PM +0200, Rafał Miłecki wrote:
-> From: Rafał Miłecki <rafal@milecki.pl>
+On Wed, Sep 26, 2018 at 09:31:02PM +0200, Rafa? Mi?ecki wrote:
+> From: Rafa? Mi?ecki <rafal@milecki.pl>
 > 
 > Northstar has mux controller just like Northstar Plus and Northstar2.
 > It's a bit different though (different registers & pins) so it requires
@@ -7,7 +7,7 @@ On Wed, Sep 26, 2018 at 09:31:02PM +0200, Rafał Miłecki wrote:
 > 
 > It's needed to allow other block bindings specify required mux setup.
 > 
-> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+> Signed-off-by: Rafa? Mi?ecki <rafal@milecki.pl>
 > Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
 > ---
 > V2: Use "cru_gpio_control"
@@ -64,7 +64,7 @@ which should be defined here.
 > +Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 > +
 > +Example:
-> +	pinctrl@1800c1c0 {
+> +	pinctrl at 1800c1c0 {
 > +		compatible = "brcm,bcm4708-pinmux";
 > +		reg = <0x1800c1c0 0x24>;
 > +		reg-names = "cru_gpio_control";
@@ -80,9 +80,4 @@ controller nodes. So 'spi-pins' perhaps.
 > +	};
 > -- 
 > 2.13.7
-> 
-
-_______________________________________________
-linux-arm-kernel mailing list
-linux-arm-kernel@lists.infradead.org
-http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
+>
diff --git a/a/content_digest b/N1/content_digest
index bd8f694..f5ab3a9 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -1,22 +1,12 @@
  "ref\020180926193103.21241-1-zajec5@gmail.com\0"
- "From\0Rob Herring <robh@kernel.org>\0"
- "Subject\0Re: [PATCH V3 1/2] dt-bindings: pinctrl: document Broadcom Northstar pin mux controller\0"
+ "From\0robh@kernel.org (Rob Herring)\0"
+ "Subject\0[PATCH V3 1/2] dt-bindings: pinctrl: document Broadcom Northstar pin mux controller\0"
  "Date\0Thu, 11 Oct 2018 17:22:29 -0500\0"
- "To\0Rafa\305\202 Mi\305\202ecki <zajec5@gmail.com>\0"
- "Cc\0Mark Rutland <mark.rutland@arm.com>"
-  devicetree@vger.kernel.org
-  Florian Fainelli <f.fainelli@gmail.com>
-  Scott Branden <sbranden@broadcom.com>
-  Ray Jui <rjui@broadcom.com>
-  Linus Walleij <linus.walleij@linaro.org>
-  linux-gpio@vger.kernel.org
-  bcm-kernel-feedback-list@broadcom.com
- " Rafa\305\202 Mi\305\202ecki <rafal@milecki.pl>"
- " linux-arm-kernel@lists.infradead.org\0"
+ "To\0linux-arm-kernel@lists.infradead.org\0"
  "\00:1\0"
  "b\0"
- "On Wed, Sep 26, 2018 at 09:31:02PM +0200, Rafa\305\202 Mi\305\202ecki wrote:\n"
- "> From: Rafa\305\202 Mi\305\202ecki <rafal@milecki.pl>\n"
+ "On Wed, Sep 26, 2018 at 09:31:02PM +0200, Rafa? Mi?ecki wrote:\n"
+ "> From: Rafa? Mi?ecki <rafal@milecki.pl>\n"
  "> \n"
  "> Northstar has mux controller just like Northstar Plus and Northstar2.\n"
  "> It's a bit different though (different registers & pins) so it requires\n"
@@ -24,7 +14,7 @@
  "> \n"
  "> It's needed to allow other block bindings specify required mux setup.\n"
  "> \n"
- "> Signed-off-by: Rafa\305\202 Mi\305\202ecki <rafal@milecki.pl>\n"
+ "> Signed-off-by: Rafa? Mi?ecki <rafal@milecki.pl>\n"
  "> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>\n"
  "> ---\n"
  "> V2: Use \"cru_gpio_control\"\n"
@@ -81,7 +71,7 @@
  "> +Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt\n"
  "> +\n"
  "> +Example:\n"
- "> +\tpinctrl@1800c1c0 {\n"
+ "> +\tpinctrl at 1800c1c0 {\n"
  "> +\t\tcompatible = \"brcm,bcm4708-pinmux\";\n"
  "> +\t\treg = <0x1800c1c0 0x24>;\n"
  "> +\t\treg-names = \"cru_gpio_control\";\n"
@@ -97,11 +87,6 @@
  "> +\t};\n"
  "> -- \n"
  "> 2.13.7\n"
- "> \n"
- "\n"
- "_______________________________________________\n"
- "linux-arm-kernel mailing list\n"
- "linux-arm-kernel@lists.infradead.org\n"
- http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
+ >
 
-36783a3d86402dbc8c151bcb97ba2ec816a8cfbd159469785a3cdd6259ba7119
+bb1963d7b0b779c0361327744c4afa77e46da713cf69385418396ee583c62cfe
