All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eric Biggers <ebiggers@kernel.org>
To: linux-crypto@vger.kernel.org, Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>,
	Paul Crowley <paulcrowley@google.com>
Subject: [PATCH v3 1/2] crypto: aes_ti - disable interrupts while accessing S-box
Date: Wed, 17 Oct 2018 21:37:58 -0700	[thread overview]
Message-ID: <20181018043759.7669-2-ebiggers@kernel.org> (raw)
In-Reply-To: <20181018043759.7669-1-ebiggers@kernel.org>

From: Eric Biggers <ebiggers@google.com>

In the "aes-fixed-time" AES implementation, disable interrupts while
accessing the S-box, in order to make cache-timing attacks more
difficult.  Previously it was possible for the CPU to be interrupted
while the S-box was loaded into L1 cache, potentially evicting the
cachelines and causing later table lookups to be time-variant.

In tests I did on x86 and ARM, this doesn't affect performance
significantly.  Responsiveness is potentially a concern, but interrupts
are only disabled for a single AES block.

Note that even after this change, the implementation still isn't
necessarily guaranteed to be constant-time; see
https://cr.yp.to/antiforgery/cachetiming-20050414.pdf for a discussion
of the many difficulties involved in writing truly constant-time AES
software.  But it's valuable to make such attacks more difficult.

Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
---
 crypto/Kconfig  |  3 ++-
 crypto/aes_ti.c | 18 ++++++++++++++++++
 2 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/crypto/Kconfig b/crypto/Kconfig
index f2c19cc63c778..f6db916f1b760 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -1006,7 +1006,8 @@ config CRYPTO_AES_TI
 	  8 for decryption), this implementation only uses just two S-boxes of
 	  256 bytes each, and attempts to eliminate data dependent latencies by
 	  prefetching the entire table into the cache at the start of each
-	  block.
+	  block. Interrupts are also disabled to avoid races where cachelines
+	  are evicted when the CPU is interrupted to do something else.
 
 config CRYPTO_AES_586
 	tristate "AES cipher algorithms (i586)"
diff --git a/crypto/aes_ti.c b/crypto/aes_ti.c
index 03023b2290e8e..1ff9785b30f55 100644
--- a/crypto/aes_ti.c
+++ b/crypto/aes_ti.c
@@ -269,6 +269,7 @@ static void aesti_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 	const u32 *rkp = ctx->key_enc + 4;
 	int rounds = 6 + ctx->key_length / 4;
 	u32 st0[4], st1[4];
+	unsigned long flags;
 	int round;
 
 	st0[0] = ctx->key_enc[0] ^ get_unaligned_le32(in);
@@ -276,6 +277,12 @@ static void aesti_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 	st0[2] = ctx->key_enc[2] ^ get_unaligned_le32(in + 8);
 	st0[3] = ctx->key_enc[3] ^ get_unaligned_le32(in + 12);
 
+	/*
+	 * Temporarily disable interrupts to avoid races where cachelines are
+	 * evicted when the CPU is interrupted to do something else.
+	 */
+	local_irq_save(flags);
+
 	st0[0] ^= __aesti_sbox[ 0] ^ __aesti_sbox[128];
 	st0[1] ^= __aesti_sbox[32] ^ __aesti_sbox[160];
 	st0[2] ^= __aesti_sbox[64] ^ __aesti_sbox[192];
@@ -300,6 +307,8 @@ static void aesti_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 	put_unaligned_le32(subshift(st1, 1) ^ rkp[5], out + 4);
 	put_unaligned_le32(subshift(st1, 2) ^ rkp[6], out + 8);
 	put_unaligned_le32(subshift(st1, 3) ^ rkp[7], out + 12);
+
+	local_irq_restore(flags);
 }
 
 static void aesti_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
@@ -308,6 +317,7 @@ static void aesti_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 	const u32 *rkp = ctx->key_dec + 4;
 	int rounds = 6 + ctx->key_length / 4;
 	u32 st0[4], st1[4];
+	unsigned long flags;
 	int round;
 
 	st0[0] = ctx->key_dec[0] ^ get_unaligned_le32(in);
@@ -315,6 +325,12 @@ static void aesti_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 	st0[2] = ctx->key_dec[2] ^ get_unaligned_le32(in + 8);
 	st0[3] = ctx->key_dec[3] ^ get_unaligned_le32(in + 12);
 
+	/*
+	 * Temporarily disable interrupts to avoid races where cachelines are
+	 * evicted when the CPU is interrupted to do something else.
+	 */
+	local_irq_save(flags);
+
 	st0[0] ^= __aesti_inv_sbox[ 0] ^ __aesti_inv_sbox[128];
 	st0[1] ^= __aesti_inv_sbox[32] ^ __aesti_inv_sbox[160];
 	st0[2] ^= __aesti_inv_sbox[64] ^ __aesti_inv_sbox[192];
@@ -339,6 +355,8 @@ static void aesti_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 	put_unaligned_le32(inv_subshift(st1, 1) ^ rkp[5], out + 4);
 	put_unaligned_le32(inv_subshift(st1, 2) ^ rkp[6], out + 8);
 	put_unaligned_le32(inv_subshift(st1, 3) ^ rkp[7], out + 12);
+
+	local_irq_restore(flags);
 }
 
 static struct crypto_alg aes_alg = {
-- 
2.19.1

  reply	other threads:[~2018-10-18 12:38 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-18  4:37 [PATCH v3 0/2] crypto: some hardening against AES cache-timing attacks Eric Biggers
2018-10-18  4:37 ` Eric Biggers [this message]
2018-10-18  4:37 ` [PATCH v3 2/2] crypto: arm/aes - add some hardening against " Eric Biggers
2018-10-19  5:41   ` Ard Biesheuvel
2018-10-19  9:54     ` Ard Biesheuvel
2018-10-19 20:39       ` Eric Biggers
2018-10-20  2:34         ` Ard Biesheuvel
2018-10-19 20:30     ` Eric Biggers
2018-11-09  9:49 ` [PATCH v3 0/2] crypto: some hardening against AES " Herbert Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181018043759.7669-2-ebiggers@kernel.org \
    --to=ebiggers@kernel.org \
    --cc=ard.biesheuvel@linaro.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-crypto@vger.kernel.org \
    --cc=paulcrowley@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.