All of lore.kernel.org
 help / color / mirror / Atom feed
From: LABBE Corentin <clabbe@baylibre.com>
To: Andrew Lunn <andrew@lunn.ch>
Cc: David Miller <davem@davemloft.net>,
	netdev <netdev@vger.kernel.org>,
	Florian Fainelli <f.fainelli@gmail.com>,
	hkallweit1@gmail.com
Subject: Re: [PATCH net-next] net: phy: phy_support_sym_pause: Clear Asym Pause
Date: Sun, 21 Oct 2018 08:54:29 +0200	[thread overview]
Message-ID: <20181021065429.GA21801@Red> (raw)
In-Reply-To: <1540068088-14446-1-git-send-email-andrew@lunn.ch>

On Sat, Oct 20, 2018 at 10:41:28PM +0200, Andrew Lunn wrote:
> When indicating the MAC supports Symmetric Pause, clear the Asymmetric
> Pause bit, which could of been already set is the PHY supports it.
> 
> Reported-by: Labbe Corentin <clabbe@baylibre.com>
> Fixes: c306ad36184f ("net: ethernet: Add helper for MACs which support pause")
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> ---
>  drivers/net/phy/phy_device.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> index 43cb08dcce81..ab33d1777132 100644
> --- a/drivers/net/phy/phy_device.c
> +++ b/drivers/net/phy/phy_device.c
> @@ -1940,6 +1940,7 @@ EXPORT_SYMBOL(phy_remove_link_mode);
>   */
>  void phy_support_sym_pause(struct phy_device *phydev)
>  {
> +	phydev->supported &= ~SUPPORTED_Asym_Pause;
>  	phydev->supported |= SUPPORTED_Pause;
>  	phydev->advertising = phydev->supported;
>  }
> -- 
> 2.19.0
> 

Thanks, it made my imx6q-sabrelite works again with next-20181019.
Tested-by: Corentin Labbe <clabbe@baylibre.com>

For completeness, this is the ethtool output which confirm it.
ethtool version 4.16
Settings for eth0:
	Supported ports: [ TP MII ]
	Supported link modes:   10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Full 
	Supported pause frame use: Symmetric
	Supports auto-negotiation: Yes
	Supported FEC modes: Not reported
	Advertised link modes:  10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Full 
	Advertised pause frame use: Symmetric
	Advertised auto-negotiation: Yes
	Advertised FEC modes: Not reported
	Link partner advertised link modes:  10baseT/Half 10baseT/Full 
	                                     100baseT/Half 100baseT/Full 
	                                     1000baseT/Half 1000baseT/Full 
	Link partner advertised pause frame use: Symmetric Receive-only
	Link partner advertised auto-negotiation: Yes
	Link partner advertised FEC modes: Not reported
	Speed: 1000Mb/s
	Duplex: Full
	Port: MII
	PHYAD: 6
	Transceiver: internal
	Auto-negotiation: on
	Supports Wake-on: d
	Wake-on: d
	Link detected: yes

  reply	other threads:[~2018-10-21 15:07 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-20 20:41 [PATCH net-next] net: phy: phy_support_sym_pause: Clear Asym Pause Andrew Lunn
2018-10-21  6:54 ` LABBE Corentin [this message]
2018-10-21  8:24 ` Sergei Shtylyov
2018-10-23  2:38 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181021065429.GA21801@Red \
    --to=clabbe@baylibre.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.