From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] Kconfig: Convert CONFIG_IMX_WATCHDOG to Kconfig
Date: Thu, 25 Oct 2018 11:56:10 +0200 [thread overview]
Message-ID: <20181025115610.007de754@jawa> (raw)
In-Reply-To: <20181025042441.4707-1-xiaoliang.yang_1@nxp.com>
Hi Xiaoliang,
> Move this option to Kconfig and tidy up the config file of eight
> boards which use it.
Reviewed-by: Łukasz Majewski <lukma@denx.de>
>
> Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
> ---
> configs/aristainetos2_defconfig | 1 +
> configs/aristainetos2b_defconfig | 1 +
> configs/aristainetos_defconfig | 1 +
> configs/dh_imx6_defconfig | 1 +
> configs/display5_defconfig | 1 +
> configs/display5_factory_defconfig | 1 +
> configs/ge_bx50v3_defconfig | 1 +
> configs/kp_imx6q_tpc_defconfig | 1 +
> configs/mx53ppd_defconfig | 1 +
> configs/tqma6s_wru4_mmc_defconfig | 1 +
> configs/warp_defconfig | 1 +
> drivers/watchdog/Kconfig | 7 +++++++
> include/configs/aristainetos-common.h | 3 ---
> include/configs/dh_imx6.h | 2 --
> include/configs/display5.h | 2 --
> include/configs/ge_bx50v3.h | 2 --
> include/configs/kp_imx6q_tpc.h | 2 --
> include/configs/mx53ppd.h | 2 --
> include/configs/tqma6_wru4.h | 2 --
> include/configs/warp.h | 2 --
> scripts/config_whitelist.txt | 1 -
> 21 files changed, 18 insertions(+), 18 deletions(-)
>
> diff --git a/configs/aristainetos2_defconfig
> b/configs/aristainetos2_defconfig index 5044a59..c55e39c 100644
> --- a/configs/aristainetos2_defconfig
> +++ b/configs/aristainetos2_defconfig
> @@ -50,4 +50,5 @@ CONFIG_USB=y
> CONFIG_USB_STORAGE=y
> CONFIG_VIDEO=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_IMX_WATCHDOG=y
> CONFIG_OF_LIBFDT=y
> diff --git a/configs/aristainetos2b_defconfig
> b/configs/aristainetos2b_defconfig index 6641382..95c3063 100644
> --- a/configs/aristainetos2b_defconfig
> +++ b/configs/aristainetos2b_defconfig
> @@ -50,4 +50,5 @@ CONFIG_USB=y
> CONFIG_USB_STORAGE=y
> CONFIG_VIDEO=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_IMX_WATCHDOG=y
> CONFIG_OF_LIBFDT=y
> diff --git a/configs/aristainetos_defconfig
> b/configs/aristainetos_defconfig index 6a31ee6..4082b12 100644
> --- a/configs/aristainetos_defconfig
> +++ b/configs/aristainetos_defconfig
> @@ -49,4 +49,5 @@ CONFIG_USB=y
> CONFIG_USB_STORAGE=y
> CONFIG_VIDEO=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_IMX_WATCHDOG=y
> CONFIG_OF_LIBFDT=y
> diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig
> index 2cb7164..92b2377 100644
> --- a/configs/dh_imx6_defconfig
> +++ b/configs/dh_imx6_defconfig
> @@ -59,4 +59,5 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525
> CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
> CONFIG_CI_UDC=y
> CONFIG_USB_GADGET_DOWNLOAD=y
> +CONFIG_IMX_WATCHDOG=y
> CONFIG_OF_LIBFDT=y
> diff --git a/configs/display5_defconfig b/configs/display5_defconfig
> index 697138e..ab5ec59 100644
> --- a/configs/display5_defconfig
> +++ b/configs/display5_defconfig
> @@ -75,3 +75,4 @@ CONFIG_MII=y
> CONFIG_MXC_UART=y
> CONFIG_SPI=y
> CONFIG_MXC_SPI=y
> +CONFIG_IMX_WATCHDOG=y
> diff --git a/configs/display5_factory_defconfig
> b/configs/display5_factory_defconfig index 5962b64..5d1c746 100644
> --- a/configs/display5_factory_defconfig
> +++ b/configs/display5_factory_defconfig
> @@ -82,4 +82,5 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
> CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
> CONFIG_CI_UDC=y
> CONFIG_USB_GADGET_DOWNLOAD=y
> +CONFIG_IMX_WATCHDOG=y
> CONFIG_OF_LIBFDT=y
> diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig
> index 729377d..c907779 100644
> --- a/configs/ge_bx50v3_defconfig
> +++ b/configs/ge_bx50v3_defconfig
> @@ -41,5 +41,6 @@ CONFIG_CMD_E1000=y
> CONFIG_MII=y
> CONFIG_SPI=y
> CONFIG_MXC_SPI=y
> +CONFIG_IMX_WATCHDOG=y
> CONFIG_OF_LIBFDT=y
> # CONFIG_EFI_LOADER is not set
> diff --git a/configs/kp_imx6q_tpc_defconfig
> b/configs/kp_imx6q_tpc_defconfig index 84ca1ce..5ebbe1d 100644
> --- a/configs/kp_imx6q_tpc_defconfig
> +++ b/configs/kp_imx6q_tpc_defconfig
> @@ -40,4 +40,5 @@ CONFIG_MII=y
> CONFIG_IMX_THERMAL=y
> CONFIG_USB=y
> CONFIG_USB_STORAGE=y
> +CONFIG_IMX_WATCHDOG=y
> CONFIG_OF_LIBFDT=y
> diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig
> index 7be5c04..34328fd 100644
> --- a/configs/mx53ppd_defconfig
> +++ b/configs/mx53ppd_defconfig
> @@ -37,4 +37,5 @@ CONFIG_USB=y
> CONFIG_USB_STORAGE=y
> CONFIG_VIDEO=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_IMX_WATCHDOG=y
> CONFIG_OF_LIBFDT=y
> diff --git a/configs/tqma6s_wru4_mmc_defconfig
> b/configs/tqma6s_wru4_mmc_defconfig index df4c87e..c1be704 100644
> --- a/configs/tqma6s_wru4_mmc_defconfig
> +++ b/configs/tqma6s_wru4_mmc_defconfig
> @@ -65,4 +65,5 @@ CONFIG_USB=y
> CONFIG_USB_STORAGE=y
> CONFIG_USB_HOST_ETHER=y
> CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_IMX_WATCHDOG=y
> CONFIG_OF_LIBFDT=y
> diff --git a/configs/warp_defconfig b/configs/warp_defconfig
> index 6a9c91e..63eee27 100644
> --- a/configs/warp_defconfig
> +++ b/configs/warp_defconfig
> @@ -37,4 +37,5 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525
> CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
> CONFIG_CI_UDC=y
> CONFIG_USB_GADGET_DOWNLOAD=y
> +CONFIG_IMX_WATCHDOG=y
> CONFIG_OF_LIBFDT=y
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index d5dbc80..988c702 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -117,4 +117,11 @@ config XILINX_TB_WATCHDOG
> Select this to enable Xilinx Axi watchdog timer, which
> can be found on some Xilinx Microblaze Platforms.
>
> +config IMX_WATCHDOG
> + bool "Enable Watchdog Timer support for IMX and LSCH2 of NXP"
> + select HW_WATCHDOG
> + help
> + Select this to enable the IMX and LSCH2 of Layerscape
> watchdog
> + driver.
> +
> endmenu
> diff --git a/include/configs/aristainetos-common.h
> b/include/configs/aristainetos-common.h index baddd1c..ca974c0 100644
> --- a/include/configs/aristainetos-common.h
> +++ b/include/configs/aristainetos-common.h
> @@ -192,9 +192,6 @@
>
> /* UBI support */
>
> -#define CONFIG_HW_WATCHDOG
> -#define CONFIG_IMX_WATCHDOG
> -
> /* Framebuffer */
> #define CONFIG_VIDEO_IPUV3
> /* check this console not needed, after test remove it */
> diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h
> index 6c833e7..9231bd8 100644
> --- a/include/configs/dh_imx6.h
> +++ b/include/configs/dh_imx6.h
> @@ -109,8 +109,6 @@
> #endif
>
> /* Watchdog */
> -#define CONFIG_HW_WATCHDOG
> -#define CONFIG_IMX_WATCHDOG
> #define CONFIG_WATCHDOG_TIMEOUT_MSECS 60000
>
> /* allow to overwrite serial and ethaddr */
> diff --git a/include/configs/display5.h b/include/configs/display5.h
> index 6d00699..1fb7469 100644
> --- a/include/configs/display5.h
> +++ b/include/configs/display5.h
> @@ -368,8 +368,6 @@
> /* Commands */
>
> /* Watchdog */
> -#define CONFIG_HW_WATCHDOG
> -#define CONFIG_IMX_WATCHDOG
> #define CONFIG_WATCHDOG_TIMEOUT_MSECS 15000
>
> /* ENV config */
> diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
> index fad840b..e0e1f71 100644
> --- a/include/configs/ge_bx50v3.h
> +++ b/include/configs/ge_bx50v3.h
> @@ -31,8 +31,6 @@
> #define CONFIG_REVISION_TAG
> #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
>
> -#define CONFIG_HW_WATCHDOG
> -#define CONFIG_IMX_WATCHDOG
> #define CONFIG_WATCHDOG_TIMEOUT_MSECS 6000
>
> #define CONFIG_MXC_UART
> diff --git a/include/configs/kp_imx6q_tpc.h
> b/include/configs/kp_imx6q_tpc.h index 7043830..b6b27ee 100644
> --- a/include/configs/kp_imx6q_tpc.h
> +++ b/include/configs/kp_imx6q_tpc.h
> @@ -67,8 +67,6 @@
> #endif
>
> /* Watchdog */
> -#define CONFIG_HW_WATCHDOG
> -#define CONFIG_IMX_WATCHDOG
> #define CONFIG_WATCHDOG_TIMEOUT_MSECS 60000
>
> /* allow to overwrite serial and ethaddr */
> diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h
> index bbd4cd7..d2a8e65 100644
> --- a/include/configs/mx53ppd.h
> +++ b/include/configs/mx53ppd.h
> @@ -22,8 +22,6 @@
> /* Size of malloc() pool */
> #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
>
> -#define CONFIG_HW_WATCHDOG
> -#define CONFIG_IMX_WATCHDOG
> #define CONFIG_WATCHDOG_TIMEOUT_MSECS 8000
>
> #define CONFIG_BOARD_LATE_INIT
> diff --git a/include/configs/tqma6_wru4.h
> b/include/configs/tqma6_wru4.h index a945272..34f000f 100644
> --- a/include/configs/tqma6_wru4.h
> +++ b/include/configs/tqma6_wru4.h
> @@ -17,8 +17,6 @@
> #define CONSOLE_DEV "ttymxc3"
>
> /* Watchdog */
> -#define CONFIG_HW_WATCHDOG
> -#define CONFIG_IMX_WATCHDOG
> #define CONFIG_WATCHDOG_TIMEOUT_MSECS 60000
>
> /* Config on-board RTC */
> diff --git a/include/configs/warp.h b/include/configs/warp.h
> index f9c095d..9aa8a48 100644
> --- a/include/configs/warp.h
> +++ b/include/configs/warp.h
> @@ -26,8 +26,6 @@
> #define CONFIG_SUPPORT_EMMC_BOOT
>
> /* Watchdog */
> -#define CONFIG_HW_WATCHDOG
> -#define CONFIG_IMX_WATCHDOG
> #define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 /* 30s */
>
> #define CONFIG_SYS_MEMTEST_START 0x80000000
> diff --git a/scripts/config_whitelist.txt
> b/scripts/config_whitelist.txt index b85c35b..59108b9 100644
> --- a/scripts/config_whitelist.txt
> +++ b/scripts/config_whitelist.txt
> @@ -964,7 +964,6 @@ CONFIG_IMX_HDMI
> CONFIG_IMX_NAND
> CONFIG_IMX_OTP
> CONFIG_IMX_VIDEO_SKIP
> -CONFIG_IMX_WATCHDOG
> CONFIG_INETSPACE_V2
> CONFIG_INITRD_TAG
> CONFIG_INIT_CRITICAL
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181025/9a31f485/attachment.sig>
next prev parent reply other threads:[~2018-10-25 9:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-25 4:24 [U-Boot] [PATCH] Kconfig: Convert CONFIG_IMX_WATCHDOG to Kconfig Xiaoliang Yang
2018-10-25 9:56 ` Lukasz Majewski [this message]
-- strict thread matches above, loose matches on Subject: below --
2018-10-18 9:14 Xiaoliang Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181025115610.007de754@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.