From: Ladislav Michl <ladis@linux-mips.org>
To: barebox@lists.infradead.org
Subject: [PATCH 01/16] mtd: nand: refactor chip->block_markbad interface
Date: Sun, 28 Oct 2018 22:21:20 +0100 [thread overview]
Message-ID: <20181028212120.GB14788@lenoch> (raw)
In-Reply-To: <20181028211947.GA14788@lenoch>
Linux commit 5a0edb251ae9 adapted for Barebox:
The chip->block_markbad pointer should really only be responsible for
writing a bad block marker for new bad blocks. It should not take care
of BBT-related functionality, nor should it handle bookkeeping of bad
block stats.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
drivers/mtd/nand/nand_base.c | 87 +++++++++++++++++++++---------------
1 file changed, 52 insertions(+), 35 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ccf961504..2025d176e 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -326,13 +326,58 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
}
/**
- * nand_default_block_markbad - [DEFAULT] mark a block bad
+ * nand_default_block_markbad - [DEFAULT] mark a block bad via bad block marker
* @mtd: MTD device structure
* @ofs: offset from device start
*
* This is the default implementation, which can be overridden by a hardware
- * specific driver. We try operations in the following order, according to our
- * bbt_options (NAND_BBT_NO_OOB_BBM and NAND_BBT_USE_FLASH):
+ * specific driver. It provides the details for writing a bad block marker to a
+ * block.
+ */
+static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
+ uint8_t buf[2] = { 0, 0 };
+ int ret = 0, res, i = 0;
+
+ ops.datbuf = NULL;
+ ops.oobbuf = buf;
+ ops.ooboffs = chip->badblockpos;
+ if (chip->options & NAND_BUSWIDTH_16) {
+ ops.ooboffs &= ~0x01;
+ ops.len = ops.ooblen = 2;
+ } else {
+ ops.len = ops.ooblen = 1;
+ }
+ ops.mode = MTD_OPS_PLACE_OOB;
+
+ /* Write to first/last page(s) if necessary */
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
+ ofs += mtd->erasesize - mtd->writesize;
+ do {
+ res = nand_do_write_oob(mtd, ofs, &ops);
+ if (!ret)
+ ret = res;
+
+ i++;
+ ofs += mtd->writesize;
+ } while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2);
+
+ return ret;
+}
+
+/**
+ * nand_block_markbad_lowlevel - mark a block bad
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ *
+ * This function performs the generic NAND bad block marking steps (i.e., bad
+ * block table(s) and/or marker(s)). We only allow the hardware driver to
+ * specify how to write bad block markers to OOB (chip->block_markbad).
+ *
+ * We try operations in the following order, according to our bbt_options
+ * (NAND_BBT_NO_OOB_BBM and NAND_BBT_USE_FLASH):
* (1) erase the affected block, to allow OOB marker to be written cleanly
* (2) update in-memory BBT
* (3) write bad block marker to OOB area of affected block
@@ -340,11 +385,10 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
* Note that we retain the first error encountered in (3) or (4), finish the
* procedures, and dump the error in the end.
*/
-static __maybe_unused int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
+static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs)
{
struct nand_chip *chip = mtd->priv;
- uint8_t buf[2] = { 0, 0 };
- int block, res, ret = 0, i = 0;
+ int block, res, ret = 0;
int write_oob = !(chip->bbt_options & NAND_BBT_NO_OOB_BBM);
if (write_oob) {
@@ -366,34 +410,8 @@ static __maybe_unused int nand_default_block_markbad(struct mtd_info *mtd, loff
/* Write bad block marker to OOB */
if (write_oob) {
- struct mtd_oob_ops ops;
- loff_t wr_ofs = ofs;
-
nand_get_device(mtd, FL_WRITING);
-
- ops.datbuf = NULL;
- ops.oobbuf = buf;
- ops.ooboffs = chip->badblockpos;
- if (chip->options & NAND_BUSWIDTH_16) {
- ops.ooboffs &= ~0x01;
- ops.len = ops.ooblen = 2;
- } else {
- ops.len = ops.ooblen = 1;
- }
- ops.mode = MTD_OPS_PLACE_OOB;
-
- /* Write to first/last page(s) if necessary */
- if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
- wr_ofs += mtd->erasesize - mtd->writesize;
- do {
- res = nand_do_write_oob(mtd, wr_ofs, &ops);
- if (!ret)
- ret = res;
-
- i++;
- wr_ofs += mtd->writesize;
- } while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2);
-
+ ret = chip->block_markbad(mtd, ofs);
nand_release_device(mtd);
}
@@ -2786,7 +2804,6 @@ static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
*/
static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
- struct nand_chip *chip = mtd->priv;
int ret;
if (!IS_ENABLED(CONFIG_MTD_WRITE))
@@ -2800,7 +2817,7 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
return ret;
}
- return chip->block_markbad(mtd, ofs);
+ return nand_block_markbad_lowlevel(mtd, ofs);
}
/**
--
2.19.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-10-28 21:21 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-28 21:19 [PATCH 00/16] NAND update (1st step) Ladislav Michl
2018-10-28 21:21 ` Ladislav Michl [this message]
2018-10-28 21:21 ` [PATCH 02/16] mtd: nand: remove multiplied-by-2 block logic Ladislav Michl
2018-10-28 21:22 ` [PATCH 03/16] mtd: nand: hide in-memory BBT implementation details Ladislav Michl
2018-10-29 10:07 ` Ladislav Michl
2018-10-29 11:43 ` Ladislav Michl
2018-10-30 9:07 ` Sascha Hauer
2018-10-28 21:22 ` [PATCH 04/16] mtd: nand: remove NAND_BBT_SCANEMPTY Ladislav Michl
2018-10-28 21:22 ` [PATCH 05/16] mtd: nand: Request strength instead of bytes for soft BCH Ladislav Michl
2018-10-28 21:23 ` [PATCH 06/16] mtd: atmel_nand: Add per board ECC setup Ladislav Michl
2018-10-28 21:23 ` [PATCH 07/16] mtd: nand: simplify nand_bch_init() usage Ladislav Michl
2018-10-28 21:24 ` [PATCH 08/16] mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES Ladislav Michl
2018-10-28 21:24 ` [PATCH 09/16] mtd: nand_bbt: handle error case for nand_create_badblock_pattern() Ladislav Michl
2018-10-28 21:25 ` [PATCH 10/16] mtd: nand_bbt: make nand_scan_bbt() static Ladislav Michl
2018-10-28 21:25 ` [PATCH 11/16] mtd: nand_bbt: unify/fix error handling in nand_scan_bbt() Ladislav Michl
2018-10-28 21:25 ` [PATCH 12/16] mtd: nand_bbt: Move BBT block selection logic out of write_bbt() Ladislav Michl
2018-10-28 21:26 ` [PATCH 13/16] mtd: nand_bbt: scan for next free bbt block if writing bbt fails Ladislav Michl
2018-10-28 21:26 ` [PATCH 14/16] mtd: nand: Kill the chip->scan_bbt() hook Ladislav Michl
2019-01-21 8:32 ` Sascha Hauer
2018-10-28 21:27 ` [PATCH 15/16] mtd: nand: Kill cellinfo Ladislav Michl
2018-10-28 21:27 ` [PATCH 16/16] mtd: nand: detect OOB size for Toshiba 24nm raw SLC Ladislav Michl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181028212120.GB14788@lenoch \
--to=ladis@linux-mips.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.