Re: [PATCH v3 3/8] drm/i915: Init aux_ch for HDMI ports too

[Rodrigo Vivi <rodrigo.vivi@intel.com>]

On Wed, Oct 31, 2018 at 05:14:52PM +0000, Souza, Jose wrote:
> On Wed, 2018-10-31 at 18:26 +0200, Imre Deak wrote:
> > From ICL onwards DDI/TypeC ports - even in HDMI static mode - need to
> > know
> > which AUX CH belongs to them, so initialize aux_ch for those ports
> > too.
> > For consistency do this for all HDMI ports, not only for DDI/TypeC
> > ones.
> > 
> > Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
> > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Cc: José Roberto de Souza <jose.souza@intel.com>
> > Signed-off-by: Imre Deak <imre.deak@intel.com>
> > ---
> >  drivers/gpu/drm/i915/intel_ddi.c  | 1 +
> >  drivers/gpu/drm/i915/intel_dp.c   | 2 +-
> >  drivers/gpu/drm/i915/intel_hdmi.c | 1 +
> >  3 files changed, 3 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> > b/drivers/gpu/drm/i915/intel_ddi.c
> > index 32a080265d03..3739ef003819 100644
> > --- a/drivers/gpu/drm/i915/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/intel_ddi.c
> > @@ -3852,6 +3852,7 @@ void intel_ddi_init(struct drm_i915_private
> > *dev_priv, enum port port)
> >  			(DDI_BUF_PORT_REVERSAL | DDI_A_4_LANES);
> >  	intel_dig_port->dp.output_reg = INVALID_MMIO_REG;
> >  	intel_dig_port->max_lanes =
> > intel_ddi_max_lanes(intel_dig_port);
> > +	intel_dig_port->aux_ch = intel_aux_ch(dev_priv, port);
> >  
> >  	switch (port) {
> >  	case PORT_A:
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c
> > b/drivers/gpu/drm/i915/intel_dp.c
> > index 5530c604c694..6645c9faca9a 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -1654,7 +1654,6 @@ intel_dp_aux_init(struct intel_dp *intel_dp)
> >  	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> >  	struct intel_encoder *encoder = &dig_port->base;
> >  
> > -	dig_port->aux_ch = intel_aux_ch(dev_priv, encoder->port);
> >  	intel_dp->aux_power_domain = intel_aux_power_domain(intel_dp);
> >  
> >  	if (INTEL_GEN(dev_priv) >= 9) {
> > @@ -6706,6 +6705,7 @@ bool intel_dp_init(struct drm_i915_private
> > *dev_priv,
> >  	if (port != PORT_A)
> >  		intel_infoframe_init(intel_dig_port);
> >  
> > +	intel_dig_port->aux_ch = intel_aux_ch(dev_priv, port);
> >  	if (!intel_dp_init_connector(intel_dig_port, intel_connector))
> >  		goto err_init_connector;
> >  
> > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c
> > b/drivers/gpu/drm/i915/intel_hdmi.c
> > index 129b880bce64..b50c5497048a 100644
> > --- a/drivers/gpu/drm/i915/intel_hdmi.c
> > +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> > @@ -2506,5 +2506,6 @@ void intel_hdmi_init(struct drm_i915_private
> > *dev_priv,
> >  
> >  	intel_infoframe_init(intel_dig_port);
> >  
> > +	intel_dig_port->aux_ch = intel_aux_ch(dev_priv, port);
> 
> Everything else looks good, I'm not just 100% confortable in
> initializing it here just for consistency, can someone else comment
> here?

The place is fine. My concern with this approach is the impact
on some legacy platforms that could be using this aux for something else.

Like... That SKL with edp-to-vga converter plugged on port-E which
uses aux from port B because this was unused because it was an HDMI plugged
on port B.

What could be the impact in a case like this?

So to avoid regressions in some old frankensteins maybe it is better
to add some check for type c no?!

> 
> >  	intel_hdmi_init_connector(intel_dig_port, intel_connector);
> >  }
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx