All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Javier Martinez Canillas <javierm@redhat.com>,
	Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH AUTOSEL 4.14 50/73] tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivated
Date: Wed, 31 Oct 2018 19:09:25 -0400	[thread overview]
Message-ID: <20181031230948.29203-50-sashal@kernel.org> (raw)
In-Reply-To: <20181031230948.29203-1-sashal@kernel.org>

From: Javier Martinez Canillas <javierm@redhat.com>

[ Upstream commit 0d6d0d62d9505a9816716aa484ebd0b04c795063 ]

For TPM 1.2 chips the system setup utility allows to set the TPM device in
one of the following states:

  * Active: Security chip is functional
  * Inactive: Security chip is visible, but is not functional
  * Disabled: Security chip is hidden and is not functional

When choosing the "Inactive" state, the TPM 1.2 device is enumerated and
registered, but sending TPM commands fail with either TPM_DEACTIVATED or
TPM_DISABLED depending if the firmware deactivated or disabled the TPM.

Since these TPM 1.2 error codes don't have special treatment, inactivating
the TPM leads to a very noisy kernel log buffer that shows messages like
the following:

  tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
  tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
  tpm tpm0: TPM is disabled/deactivated (0x6)
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
  ima: No TPM chip found, activating TPM-bypass! (rc=6)
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random

Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED}
return codes, since this is expected when the TPM 1.2 is set to Inactive.

In that case the kernel log is cleaner and less confusing for users, i.e:

  tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
  tpm tpm0: TPM is disabled/deactivated (0x6)
  ima: No TPM chip found, activating TPM-bypass! (rc=6)

Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/tpm/tpm-interface.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index a2070ab86c82..4f6505c5e631 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -652,7 +652,8 @@ ssize_t tpm_transmit_cmd(struct tpm_chip *chip, struct tpm_space *space,
 		return len;
 
 	err = be32_to_cpu(header->return_code);
-	if (err != 0 && desc)
+	if (err != 0 && err != TPM_ERR_DISABLED && err != TPM_ERR_DEACTIVATED
+	    && desc)
 		dev_err(&chip->dev, "A TPM error (%d) occurred %s\n", err,
 			desc);
 	if (err)
-- 
2.17.1


  parent reply	other threads:[~2018-10-31 23:10 UTC|newest]

Thread overview: 75+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-31 23:08 [PATCH AUTOSEL 4.14 01/73] net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 02/73] locking/lockdep: Fix debug_locks off performance problem Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 03/73] ataflop: fix error handling during setup Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 04/73] swim: fix cleanup on setup error Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 05/73] nfp: devlink port split support for 1x100G CXP NIC Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 06/73] tun: Consistently configure generic netdev params via rtnetlink Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 07/73] s390/sthyi: Fix machine name validity indication Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 08/73] hwmon: (pwm-fan) Set fan speed to 0 on suspend Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 09/73] lightnvm: pblk: fix two sleep-in-atomic-context bugs Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 10/73] spi: spi-ep93xx: Use dma_data_direction for ep93xx_spi_dma_{finish,prepare} Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 11/73] perf tools: Free temporary 'sys' string in read_event_files() Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 12/73] perf tools: Cleanup trace-event-info 'tdata' leak Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 13/73] perf strbuf: Match va_{add,copy} with va_end Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 14/73] cpupower: Fix coredump on VMWare Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 15/73] mmc: sdhci-pci-o2micro: Add quirk for O2 Micro dev 0x8620 rev 0x01 Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 16/73] iwlwifi: pcie: avoid empty free RB queue Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 17/73] iwlwifi: mvm: clear HW_RESTART_REQUESTED when stopping the interface Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 18/73] x86/olpc: Indicate that legacy PC XO-1 platform should not register RTC Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 19/73] ACPI / processor: Fix the return value of acpi_processor_ids_walk() Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 20/73] cpufreq: dt: Try freeing static OPPs only if we have added them Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 21/73] mtd: rawnand: atmel: Fix potential NULL pointer dereference Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 22/73] regulator: fixed: Default enable high on DT regulators Sasha Levin
2018-11-01 12:06   ` Mark Brown
2018-11-01 15:48     ` Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 23/73] signal: Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstack Sasha Levin
2018-10-31 23:08 ` [PATCH AUTOSEL 4.14 24/73] Bluetooth: btbcm: Add entry for BCM4335C0 UART bluetooth Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 25/73] x86: boot: Fix EFI stub alignment Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 26/73] pinctrl: qcom: spmi-mpp: Fix err handling of pmic_mpp_set_mux Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 27/73] brcmfmac: fix for proper support of 160MHz bandwidth Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 28/73] net: phy: phylink: ensure the carrier is off when starting phylink Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 29/73] block, bfq: correctly charge and reset entity service in all cases Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 30/73] kprobes: Return error if we fail to reuse kprobe instead of BUG_ON() Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 31/73] ACPI / LPSS: Add alternative ACPI HIDs for Cherry Trail DMA controllers Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 32/73] pinctrl: qcom: spmi-mpp: Fix drive strength setting Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 33/73] pinctrl: spmi-mpp: Fix pmic_mpp_config_get() to be compliant Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 34/73] pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() " Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 35/73] net: dsa: mv88e6xxx: Fix writing to a PHY page Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 36/73] iwlwifi: mvm: fix BAR seq ctrl reporting Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 37/73] ixgbevf: VF2VF TCP RSS Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 38/73] ath10k: schedule hardware restart if WMI command times out Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 39/73] thermal: da9062/61: Prevent hardware access during system suspend Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 40/73] cgroup, netclassid: add a preemption point to write_classid Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 41/73] scsi: esp_scsi: Track residual for PIO transfers Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 42/73] UAPI: ndctl: Fix g++-unsupported initialisation in headers Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 43/73] KVM: nVMX: Clear reserved bits of #DB exit qualification Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 44/73] scsi: megaraid_sas: fix a missing-check bug Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 45/73] RDMA/core: Do not expose unsupported counters Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 46/73] IB/ipoib: Clear IPCB before icmp_send Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 47/73] RDMA/bnxt_re: Fix recursive lock warning in debug kernel Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 48/73] usb: host: ohci-at91: fix request of irq for optional gpio Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 49/73] PCI: mediatek: Fix mtk_pcie_find_port() endpoint/port matching logic Sasha Levin
2018-10-31 23:09 ` Sasha Levin [this message]
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 51/73] Drivers: hv: vmbus: Use cpumask_var_t for on-stack cpu mask Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 52/73] Drivers: hv: kvp: Fix two "this statement may fall through" warnings Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 53/73] VMCI: Resource wildcard match fixed Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 54/73] PCI / ACPI: Enable wake automatically for power managed bridges Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 55/73] usb: gadget: udc: atmel: handle at91sam9rl PMC Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 56/73] ext4: fix argument checking in EXT4_IOC_MOVE_EXT Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 57/73] MD: fix invalid stored role for a disk Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 58/73] f2fs: fix to recover inode's i_flags during POR Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 59/73] PCI/MSI: Warn and return error if driver enables MSI/MSI-X twice Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 60/73] coresight: etb10: Fix handling of perf mode Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 61/73] PCI: dwc: pci-dra7xx: Enable errata i870 for both EP and RC mode Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 62/73] crypto: caam - fix implicit casts in endianness helpers Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 63/73] usb: chipidea: Prevent unbalanced IRQ disable Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 64/73] driver/dma/ioat: Call del_timer_sync() without holding prep_lock Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 65/73] uio: ensure class is registered before devices Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 66/73] scsi: lpfc: Correct soft lockup when running mds diagnostics Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 67/73] scsi: lpfc: Correct race with abort on completion path Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 68/73] f2fs: report error if quota off error during umount Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 69/73] signal: Always deliver the kernel's SIGKILL and SIGSTOP to a pid namespace init Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 70/73] mfd: menelaus: Fix possible race condition and leak Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 71/73] dmaengine: dma-jz4780: Return error if not probed from DT Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 72/73] IB/rxe: fix for duplicate request processing and ack psns Sasha Levin
2018-10-31 23:09 ` [PATCH AUTOSEL 4.14 73/73] ALSA: hda: Check the non-cached stream buffers more explicitly Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181031230948.29203-50-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=jarkko.sakkinen@linux.intel.com \
    --cc=javierm@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.