All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Uma Shankar <uma.shankar@intel.com>
Cc: intel-gfx@lists.freedesktop.org, ville.syrjala@intel.com,
	maarten.lankhorst@intel.com
Subject: Re: [v7 2/2] drm/i915/icl: Enable Plane Input CSC for YUV to RGB Conversion
Date: Thu, 1 Nov 2018 11:46:46 +0200	[thread overview]
Message-ID: <20181101094646.GA9144@intel.com> (raw)
In-Reply-To: <1541060341-31948-3-git-send-email-uma.shankar@intel.com>

On Thu, Nov 01, 2018 at 01:49:01PM +0530, Uma Shankar wrote:
> Plane input CSC needs to be enabled to convert frambuffers from
> YUV to RGB. This is needed for bottom 3 planes on ICL, rest of
> the planes have hardcoded conversion and taken care by the legacy
> code.
> 
> This patch defines the co-efficient values for YUV to RGB conversion
> in BT709 and BT601 formats. It programs the coefficients and enables
> the plane input csc unit in hardware.
> 
> This has been verified and tested by Maarten and the change is working
> as expecpted.
> 
> v2: Addressed Maarten's and Ville's review comments and added the
> coefficients in a 2D array instead of independent Macros.
> 
> v3: Added individual coefficient matrix (9 values) instead of 6
> register values as per Maarten's comment. Also addresed a shift
> issue with B channel coefficient.
> 
> v4: Added support for Limited Range Color Handling
> 
> v5: Fixed Matt and Maarten's review comments.
> 
> v6: Added human readable matrix values for YUV to RGB Conversion along
> with just the bspec register values, as per Matt's suggestion.
> 
> v7: Refactored the code, move csc coefficient programming function to
> intel_sprite.c and made it static as per Ville's review comment.
> 
> Signed-off-by: Uma Shankar <uma.shankar@intel.com>
> Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> 
> ---
>  drivers/gpu/drm/i915/intel_display.c | 17 +++++--
>  drivers/gpu/drm/i915/intel_sprite.c  | 99 ++++++++++++++++++++++++++++++++++++
>  include/drm/drm_color_mgmt.h         |  9 ++++
>  3 files changed, 120 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index fe045ab..daec1fd 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -3666,6 +3666,7 @@ u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
>  	struct drm_i915_private *dev_priv =
>  		to_i915(plane_state->base.plane->dev);
>  	const struct drm_framebuffer *fb = plane_state->base.fb;
> +	struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
>  	u32 plane_color_ctl = 0;
>  
>  	if (INTEL_GEN(dev_priv) < 11) {
> @@ -3675,14 +3676,20 @@ u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
>  	plane_color_ctl |= PLANE_COLOR_PLANE_GAMMA_DISABLE;
>  	plane_color_ctl |= glk_plane_color_ctl_alpha(plane_state);
>  
> -	if (fb->format->is_yuv) {
> -		if (plane_state->base.color_encoding == DRM_COLOR_YCBCR_BT709)
> -			plane_color_ctl |= PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709;
> +	if (fb->format->is_yuv && !icl_is_hdr_plane(plane)) {
> +		if (plane_state->base.color_encoding ==
> +				DRM_COLOR_YCBCR_BT709)
> +			plane_color_ctl |=
> +				PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709;
>  		else
> -			plane_color_ctl |= PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709;
> +			plane_color_ctl |=
> +				PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709;
>  
>  		if (plane_state->base.color_range == DRM_COLOR_YCBCR_FULL_RANGE)
> -			plane_color_ctl |= PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;
> +			plane_color_ctl |=
> +			PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;
> +	} else if (fb->format->is_yuv) {
> +		plane_color_ctl |= PLANE_COLOR_INPUT_CSC_ENABLE;
>  	}
>  
>  	return plane_color_ctl;
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> index c604f6b..711502455 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -40,6 +40,7 @@
>  #include "intel_frontbuffer.h"
>  #include <drm/i915_drm.h>
>  #include "i915_drv.h"
> +#include <drm/drm_color_mgmt.h>
>  
>  int intel_usecs_to_scanlines(const struct drm_display_mode *adjusted_mode,
>  			     int usecs)
> @@ -458,11 +459,106 @@ int intel_plane_check_src_coordinates(struct intel_plane_state *plane_state)
>  	spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
>  }
>  
> +static void
> +icl_program_input_csc_coeff(const struct intel_crtc_state *crtc_state,
> +			    const struct intel_plane_state *plane_state)
> +{
> +	struct drm_i915_private *dev_priv =
> +		to_i915(plane_state->base.plane->dev);
> +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> +	enum pipe pipe = crtc->pipe;
> +	struct intel_plane *intel_plane =
> +		to_intel_plane(plane_state->base.plane);
> +	enum plane_id plane = intel_plane->id;
> +
> +	static const u16 input_csc_matrix[][9] = {
> +		/*
> +		 * BT.601 full range YCbCr -> full range RGB
> +		 * The matrix required is :
> +		 * [1.000, 0.000, 1.371,
> +		 *  1.000, -0.336, -0.698,
> +		 *  1.000, 1.732, 0.0000]
> +		 */
> +		[DRM_COLOR_YCBCR_BT601] = {
> +			0x7AF8, 0x7800, 0x0,
> +			0x8B28, 0x7800, 0x9AC0,
> +			0x0, 0x7800, 0x7DD8,
> +		},
> +		/*
> +		 * BT.709 full range YCbCr -> full range RGB
> +		 * The matrix required is :
> +		 * [1.000, 0.000, 1.574,
> +		 *  1.000, -0.187, -0.468,
> +		 *  1.000, 1.855, 0.0000]
> +		 */
> +		[DRM_COLOR_YCBCR_BT709] = {
> +			0x7C98, 0x7800, 0x0,
> +			0x9EF8, 0x7800, 0xABF8,
> +			0x0, 0x7800,  0x7ED8,
> +		},
> +	};
> +
> +	/* Matrix for Limited Range to Full Range Conversion */
> +	static const u16 input_csc_matrix_lr[][9] = {
> +		/*
> +		 * BT.601 Limted range YCbCr -> full range RGB
> +		 * The matrix required is :
> +		 * [1.164384, 0.000, 1.596370,
> +		 *  1.138393, -0.382500, -0.794598,
> +		 *  1.138393, 1.971696, 0.0000]
> +		 */
> +		[DRM_COLOR_YCBCR_BT601] = {
> +			0x7CC8, 0x7950, 0x0,
> +			0x8CB8, 0x7918, 0x9C40,
> +			0x0, 0x7918, 0x7FC8,
> +		},
> +		/*
> +		 * BT.709 Limited range YCbCr -> full range RGB
> +		 * The matrix required is :
> +		 * [1.164, 0.000, 1.833671,
> +		 *  1.138393, -0.213249, -0.532909,
> +		 *  1.138393, 2.112402, 0.0000]
> +		 */
> +		[DRM_COLOR_YCBCR_BT709] = {
> +			0x7EA8, 0x7950, 0x0,
> +			0x8888, 0x7918, 0xADA8,
> +			0x0, 0x7918,  0x6870,
> +		},
> +	};
> +	const u16 *csc;
> +
> +	if (plane_state->base.color_range == DRM_COLOR_YCBCR_FULL_RANGE)
> +		csc = input_csc_matrix[plane_state->base.color_encoding];
> +	else
> +		csc = input_csc_matrix_lr[plane_state->base.color_encoding];
> +
> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 0), ROFF(csc[0]) |
> +		   GOFF(csc[1]));

Make all of these I915_WRITE_FW() and ...

> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 1), BOFF(csc[2]));
> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 2), ROFF(csc[3]) |
> +		   GOFF(csc[4]));
> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 3), BOFF(csc[5]));
> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 4), ROFF(csc[6]) |
> +		   GOFF(csc[7]));
> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 5), BOFF(csc[8]));
> +
> +	I915_WRITE(PLANE_INPUT_CSC_PREOFF(pipe, plane, 0),
> +		   PREOFF_YUV_TO_RGB_HI);
> +	I915_WRITE(PLANE_INPUT_CSC_PREOFF(pipe, plane, 1),
> +		   PREOFF_YUV_TO_RGB_ME);
> +	I915_WRITE(PLANE_INPUT_CSC_PREOFF(pipe, plane, 2),
> +		   PREOFF_YUV_TO_RGB_LO);
> +	I915_WRITE(PLANE_INPUT_CSC_POSTOFF(pipe, plane, 0), 0x0);
> +	I915_WRITE(PLANE_INPUT_CSC_POSTOFF(pipe, plane, 1), 0x0);
> +	I915_WRITE(PLANE_INPUT_CSC_POSTOFF(pipe, plane, 2), 0x0);
> +}
> +
>  void
>  skl_update_plane(struct intel_plane *plane,
>  		 const struct intel_crtc_state *crtc_state,
>  		 const struct intel_plane_state *plane_state)
>  {
> +	const struct drm_framebuffer *fb = plane_state->base.fb;
>  	int color_plane = 0;
>  
>  	if (plane_state->linked_plane) {
> @@ -470,6 +566,9 @@ int intel_plane_check_src_coordinates(struct intel_plane_state *plane_state)
>  		color_plane = 1;
>  	}
>  
> +	if (fb->format->is_yuv && icl_is_hdr_plane(plane))
> +		icl_program_input_csc_coeff(crtc_state, plane_state);

... call this from within the spinlocked section of skl_program_plane().

> +
>  	skl_program_plane(plane, crtc_state, plane_state,
>  			  color_plane, false, plane_state->ctl);
>  }
> diff --git a/include/drm/drm_color_mgmt.h b/include/drm/drm_color_mgmt.h
> index 90ef999..3e17381 100644
> --- a/include/drm/drm_color_mgmt.h
> +++ b/include/drm/drm_color_mgmt.h
> @@ -29,6 +29,15 @@
>  struct drm_crtc;
>  struct drm_plane;
>  
> +/* Preoffset values for YUV to RGB Conversion */
> +#define PREOFF_YUV_TO_RGB_HI		0x1800
> +#define PREOFF_YUV_TO_RGB_ME		0x1F00
> +#define PREOFF_YUV_TO_RGB_LO		0x1800
> +
> +#define  ROFF(x)          (((x) & 0xffff) << 16)
> +#define  GOFF(x)          (((x) & 0xffff) << 0)
> +#define  BOFF(x)          (((x) & 0xffff) << 16)
> +
>  uint32_t drm_color_lut_extract(uint32_t user_input, uint32_t bit_precision);
>  
>  void drm_crtc_enable_color_mgmt(struct drm_crtc *crtc,
> -- 
> 1.9.1
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2018-11-01  9:46 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-01  8:18 [v7 0/2] Enable Plane Input CSC for ICL Uma Shankar
2018-11-01  8:19 ` [v7 1/2] drm/i915/icl: Define Plane Input CSC Coefficient Registers Uma Shankar
2018-11-01  8:19 ` [v7 2/2] drm/i915/icl: Enable Plane Input CSC for YUV to RGB Conversion Uma Shankar
2018-11-01  9:46   ` Ville Syrjälä [this message]
2018-11-01 17:45     ` Shankar, Uma
2018-11-01  9:50   ` Ville Syrjälä
2018-11-01 17:45     ` Shankar, Uma
2018-11-01  9:24 ` ✗ Fi.CI.BAT: failure for Enable Plane Input CSC for ICL (rev6) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181101094646.GA9144@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=maarten.lankhorst@intel.com \
    --cc=uma.shankar@intel.com \
    --cc=ville.syrjala@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.