All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: Roberto Sassu <roberto.sassu@huawei.com>
Cc: zohar@linux.ibm.com, linux-integrity@vger.kernel.org,
	linux-security-module@vger.kernel.org,
	linux-kernel@vger.kernel.org, silviu.vlasceanu@huawei.com
Subject: Re: [PATCH v4 0/6] tpm: retrieve digest size of unknown algorithms from TPM
Date: Thu, 8 Nov 2018 15:51:40 +0200	[thread overview]
Message-ID: <20181108135140.GB8922@linux.intel.com> (raw)
In-Reply-To: <20181106150159.1136-1-roberto.sassu@huawei.com>

On Tue, Nov 06, 2018 at 04:01:53PM +0100, Roberto Sassu wrote:
> The TPM driver currently relies on the crypto subsystem to determine the
> digest size of supported TPM algorithms. In the future, TPM vendors might
> implement new algorithms in their chips, and those algorithms might not
> be supported by the crypto subsystem.
> 
> Usually, vendors provide patches for the new hardware, and likely
> the crypto subsystem will be updated before the new algorithm is
> introduced. However, old kernels might be updated later, after patches
> are included in the mainline kernel. This would leave the opportunity
> for attackers to misuse PCRs, as PCR banks with an unknown algorithm
> are not extended.
> 
> This patch set provides a long term solution for this issue. If a TPM
> algorithm is not known by the crypto subsystem, the TPM driver retrieves
> the digest size from the TPM with a PCR read. All the PCR banks are
> extended, even if the algorithm is not yet supported by the crypto
> subsystem.
> 
> PCR bank information (TPM algorithm ID, digest size, crypto subsystem ID)
> is stored in the tpm_chip structure and available for users of the TPM
> driver.
> 
> Changelog
> 
> v3:
> - remove end marker change
> - replace active_banks static array with pointer to dynamic array
> - remove TPM2_ACTIVE_PCR_BANKS
> 
> v2:
> - change the end marker of the active_banks array
> - check digest size from output of PCR read command
> - remove count parameter from tpm_pcr_read() and tpm2_pcr_read()
> 
> v1:
> - modify definition of tpm_pcr_read()
> - move hash algorithms and definition of tpm2_digest to include/linux/tpm.h
> 
> Roberto Sassu (6):
>   tpm: dynamically allocate active_banks array
>   tpm: remove definition of TPM2_ACTIVE_PCR_BANKS
>   tpm: rename and export tpm2_digest and tpm2_algorithms
>   tpm: modify tpm_pcr_read() definition to pass a TPM hash algorithm
>   tpm: retrieve digest size of unknown algorithms with PCR read
>   tpm: ensure that the output of PCR read contains the correct digest
>     size
> 
>  drivers/char/tpm/tpm-chip.c         |   1 +
>  drivers/char/tpm/tpm-interface.c    |  34 +++++---
>  drivers/char/tpm/tpm.h              |  19 ++---
>  drivers/char/tpm/tpm2-cmd.c         | 115 ++++++++++++++++++++--------
>  include/linux/tpm.h                 |  30 +++++++-
>  include/linux/tpm_eventlog.h        |  12 +--
>  security/integrity/ima/ima_crypto.c |  10 +--
>  7 files changed, 145 insertions(+), 76 deletions(-)
> 
> -- 
> 2.17.1
> 

You should rebase your series to the latest upstream.

/Jarkko

      parent reply	other threads:[~2018-11-08 13:51 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-06 15:01 [PATCH v4 0/6] tpm: retrieve digest size of unknown algorithms from TPM Roberto Sassu
2018-11-06 15:01 ` [PATCH v4 1/6] tpm: dynamically allocate active_banks array Roberto Sassu
2018-11-07  6:14   ` Nayna Jain
2018-11-07  9:41     ` Roberto Sassu
2018-11-08 13:50       ` Nayna Jain
2018-11-08 14:40         ` Roberto Sassu
2018-11-08 15:21         ` Jarkko Sakkinen
2018-11-08 15:29           ` Mimi Zohar
2018-11-08 18:57             ` Jarkko Sakkinen
2018-11-08 15:54           ` Ken Goldman
2018-12-13 20:21       ` Ken Goldman
2018-11-07 11:10     ` Mimi Zohar
2018-11-08 13:46   ` Jarkko Sakkinen
2018-11-08 14:24     ` Roberto Sassu
2018-11-08 15:22       ` Jarkko Sakkinen
2018-11-13 13:34     ` Roberto Sassu
2018-11-13 17:04       ` Jarkko Sakkinen
2018-11-13 13:53     ` Roberto Sassu
2018-11-06 15:01 ` [PATCH v4 2/6] tpm: remove definition of TPM2_ACTIVE_PCR_BANKS Roberto Sassu
2018-11-08 14:02   ` Jarkko Sakkinen
2018-11-08 14:03     ` Jarkko Sakkinen
2018-11-08 14:52       ` Roberto Sassu
2018-11-08 19:05   ` Jarkko Sakkinen
2018-11-06 15:01 ` [PATCH v4 3/6] tpm: rename and export tpm2_digest and tpm2_algorithms Roberto Sassu
2018-11-06 15:01 ` [PATCH v4 4/6] tpm: modify tpm_pcr_read() definition to pass a TPM hash algorithm Roberto Sassu
2018-11-08 14:04   ` Jarkko Sakkinen
2018-11-08 14:16     ` Roberto Sassu
2018-11-08 15:15       ` Jarkko Sakkinen
2018-11-08 15:19         ` Peter Huewe
2018-11-08 19:08           ` Jarkko Sakkinen
2018-11-13 12:34             ` Jarkko Sakkinen
2018-11-13 12:39               ` Roberto Sassu
2018-11-13 16:56                 ` Jarkko Sakkinen
2018-11-06 15:01 ` [PATCH v4 5/6] tpm: retrieve digest size of unknown algorithms with PCR read Roberto Sassu
2018-11-06 15:01 ` [PATCH v4 6/6] tpm: ensure that the output of PCR read contains the correct digest size Roberto Sassu
2018-11-08 14:08   ` Jarkko Sakkinen
2018-11-08 14:47     ` Roberto Sassu
2018-11-08 18:52       ` Jarkko Sakkinen
2018-11-13 13:08     ` Roberto Sassu
2018-11-13 16:59       ` Jarkko Sakkinen
2018-11-08 13:51 ` Jarkko Sakkinen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181108135140.GB8922@linux.intel.com \
    --to=jarkko.sakkinen@linux.intel.com \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=roberto.sassu@huawei.com \
    --cc=silviu.vlasceanu@huawei.com \
    --cc=zohar@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.