From: Gabriel Francisco Mandaji <gfmandaji@gmail.com>
To: Hans Verkuil <hverkuil@xs4all.nl>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: lkcamp@lists.libreplanetbr.org
Subject: [PATCH v3] media: vivid: Improve timestamping
Date: Sun, 11 Nov 2018 20:39:37 -0200 [thread overview]
Message-ID: <20181111223937.GA24963@gfm-note> (raw)
Simulate a more precise timestamp by calculating it based on the
current framerate.
Signed-off-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com>
---
Changes in v2:
- fix spelling
- end of exposure is offset by 90% of the frame period
- fix timestamp calculation for FIELD_ALTERNATE (untested)
- timestamp is now calculated and set from vivid_thread_cap_tick()
- capture vbi uses the same timestamp as non-vbi, but offset by 5%
- timestamp stays consistent even if the FPS changes
- tested with dropped frames
Changes in v3:
- fix calculating offset for 'End of Frame'
- fix changing 'Timestamp Source' mid-capture
- change order of operation when calculating the VBI's offset
---
drivers/media/platform/vivid/vivid-core.h | 3 ++
drivers/media/platform/vivid/vivid-kthread-cap.c | 47 +++++++++++++++++-------
drivers/media/platform/vivid/vivid-vbi-cap.c | 4 --
3 files changed, 36 insertions(+), 18 deletions(-)
diff --git a/drivers/media/platform/vivid/vivid-core.h b/drivers/media/platform/vivid/vivid-core.h
index 1891254..f7b2a0b 100644
--- a/drivers/media/platform/vivid/vivid-core.h
+++ b/drivers/media/platform/vivid/vivid-core.h
@@ -392,6 +392,9 @@ struct vivid_dev {
/* thread for generating video capture stream */
struct task_struct *kthread_vid_cap;
unsigned long jiffies_vid_cap;
+ u64 cap_stream_start;
+ u64 cap_frame_period;
+ u64 cap_frame_eof_offset;
u32 cap_seq_offset;
u32 cap_seq_count;
bool cap_seq_resync;
diff --git a/drivers/media/platform/vivid/vivid-kthread-cap.c b/drivers/media/platform/vivid/vivid-kthread-cap.c
index eebfff2..f97cb6a 100644
--- a/drivers/media/platform/vivid/vivid-kthread-cap.c
+++ b/drivers/media/platform/vivid/vivid-kthread-cap.c
@@ -425,12 +425,6 @@ static void vivid_fillbuff(struct vivid_dev *dev, struct vivid_buffer *buf)
is_loop = true;
buf->vb.sequence = dev->vid_cap_seq_count;
- /*
- * Take the timestamp now if the timestamp source is set to
- * "Start of Exposure".
- */
- if (dev->tstamp_src_is_soe)
- buf->vb.vb2_buf.timestamp = ktime_get_ns();
if (dev->field_cap == V4L2_FIELD_ALTERNATE) {
/*
* 60 Hz standards start with the bottom field, 50 Hz standards
@@ -554,14 +548,6 @@ static void vivid_fillbuff(struct vivid_dev *dev, struct vivid_buffer *buf)
}
}
}
-
- /*
- * If "End of Frame" is specified at the timestamp source, then take
- * the timestamp now.
- */
- if (!dev->tstamp_src_is_soe)
- buf->vb.vb2_buf.timestamp = ktime_get_ns();
- buf->vb.vb2_buf.timestamp += dev->time_wrap_offset;
}
/*
@@ -667,10 +653,25 @@ static void vivid_overlay(struct vivid_dev *dev, struct vivid_buffer *buf)
}
}
+static void vivid_cap_update_frame_period(struct vivid_dev *dev)
+{
+ u64 f_period = dev->timeperframe_vid_cap.numerator * 1000000000 /
+ dev->timeperframe_vid_cap.denominator;
+ if (dev->field_cap == V4L2_FIELD_ALTERNATE)
+ f_period /= 2;
+ /*
+ * If "End of Frame", then offset the exposure time by 0.9
+ * of the frame period.
+ */
+ dev->cap_frame_eof_offset = f_period * 9 / 10;
+ dev->cap_frame_period = f_period;
+}
+
static void vivid_thread_vid_cap_tick(struct vivid_dev *dev, int dropped_bufs)
{
struct vivid_buffer *vid_cap_buf = NULL;
struct vivid_buffer *vbi_cap_buf = NULL;
+ u64 f_time = 0;
dprintk(dev, 1, "Video Capture Thread Tick\n");
@@ -702,6 +703,11 @@ static void vivid_thread_vid_cap_tick(struct vivid_dev *dev, int dropped_bufs)
if (!vid_cap_buf && !vbi_cap_buf)
goto update_mv;
+ f_time = dev->cap_frame_period * dev->vid_cap_seq_count +
+ dev->cap_stream_start + dev->time_wrap_offset;
+ if (!dev->tstamp_src_is_soe)
+ f_time += dev->cap_frame_eof_offset;
+
if (vid_cap_buf) {
v4l2_ctrl_request_setup(vid_cap_buf->vb.vb2_buf.req_obj.req,
&dev->ctrl_hdl_vid_cap);
@@ -721,9 +727,13 @@ static void vivid_thread_vid_cap_tick(struct vivid_dev *dev, int dropped_bufs)
VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
dprintk(dev, 2, "vid_cap buffer %d done\n",
vid_cap_buf->vb.vb2_buf.index);
+
+ vid_cap_buf->vb.vb2_buf.timestamp = f_time;
}
if (vbi_cap_buf) {
+ u64 vbi_period;
+
v4l2_ctrl_request_setup(vbi_cap_buf->vb.vb2_buf.req_obj.req,
&dev->ctrl_hdl_vbi_cap);
if (dev->stream_sliced_vbi_cap)
@@ -736,6 +746,10 @@ static void vivid_thread_vid_cap_tick(struct vivid_dev *dev, int dropped_bufs)
VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
dprintk(dev, 2, "vbi_cap %d done\n",
vbi_cap_buf->vb.vb2_buf.index);
+
+ /* If capturing a VBI, offset by 0.05 */
+ vbi_period = dev->cap_frame_period * 5 / 100;
+ vbi_cap_buf->vb.vb2_buf.timestamp = f_time + vbi_period;
}
dev->dqbuf_error = false;
@@ -767,6 +781,8 @@ static int vivid_thread_vid_cap(void *data)
dev->cap_seq_count = 0;
dev->cap_seq_resync = false;
dev->jiffies_vid_cap = jiffies;
+ dev->cap_stream_start = ktime_get_ns();
+ vivid_cap_update_frame_period(dev);
for (;;) {
try_to_freeze();
@@ -779,6 +795,9 @@ static int vivid_thread_vid_cap(void *data)
dev->jiffies_vid_cap = cur_jiffies;
dev->cap_seq_offset = dev->cap_seq_count + 1;
dev->cap_seq_count = 0;
+ dev->cap_stream_start += dev->cap_frame_period *
+ dev->cap_seq_offset;
+ vivid_cap_update_frame_period(dev);
dev->cap_seq_resync = false;
}
numerator = dev->timeperframe_vid_cap.numerator;
diff --git a/drivers/media/platform/vivid/vivid-vbi-cap.c b/drivers/media/platform/vivid/vivid-vbi-cap.c
index 903cebe..17aa4b0 100644
--- a/drivers/media/platform/vivid/vivid-vbi-cap.c
+++ b/drivers/media/platform/vivid/vivid-vbi-cap.c
@@ -95,8 +95,6 @@ void vivid_raw_vbi_cap_process(struct vivid_dev *dev, struct vivid_buffer *buf)
if (!VIVID_INVALID_SIGNAL(dev->std_signal_mode))
vivid_vbi_gen_raw(&dev->vbi_gen, &vbi, vbuf);
-
- buf->vb.vb2_buf.timestamp = ktime_get_ns() + dev->time_wrap_offset;
}
@@ -119,8 +117,6 @@ void vivid_sliced_vbi_cap_process(struct vivid_dev *dev,
for (i = 0; i < 25; i++)
vbuf[i] = dev->vbi_gen.data[i];
}
-
- buf->vb.vb2_buf.timestamp = ktime_get_ns() + dev->time_wrap_offset;
}
static int vbi_cap_queue_setup(struct vb2_queue *vq,
--
1.9.1
next reply other threads:[~2018-11-12 8:29 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-11 22:39 Gabriel Francisco Mandaji [this message]
2018-11-16 14:12 ` [PATCH v3] media: vivid: Improve timestamping Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181111223937.GA24963@gfm-note \
--to=gfmandaji@gmail.com \
--cc=hverkuil@xs4all.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=lkcamp@lists.libreplanetbr.org \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.