All of lore.kernel.org
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@bootlin.com>
To: "Rafał Miłecki" <rafal@milecki.pl>
Cc: "Rafał Miłecki" <zajec5@gmail.com>,
	"David Woodhouse" <dwmw2@infradead.org>,
	"Brian Norris" <computersforpeace@gmail.com>,
	"Boris Brezillon" <boris.brezillon@free-electrons.com>,
	"Marek Vasut" <marek.vasut@gmail.com>,
	"Richard Weinberger" <richard@nod.at>,
	linux-mtd@lists.infradead.org,
	"Miquel Raynal" <miquel.raynal@bootlin.com>
Subject: Re: [PATCH] mtd: keep original flags for every struct mtd_info
Date: Tue, 20 Nov 2018 11:07:57 +0100	[thread overview]
Message-ID: <20181120110757.527e6f3f@bbrezillon> (raw)
In-Reply-To: <6ceccac8c2e82fe74fabbc33a3615e5d@milecki.pl>

On Tue, 20 Nov 2018 10:43:38 +0100
Rafał Miłecki <rafal@milecki.pl> wrote:

> On 2018-11-20 10:13, Boris Brezillon wrote:
> > On Tue, 20 Nov 2018 09:55:45 +0100
> > Rafał Miłecki <zajec5@gmail.com> wrote:
> >   
> >> From: Rafał Miłecki <rafal@milecki.pl>
> >> 
> >> When allocating a new partition mtd subsystem runs internal tests in 
> >> the
> >> allocate_partition(). They may result in modifying specified flags 
> >> (e.g.
> >> dropping some /features/ like write access).
> >> 
> >> Those constraints don't have to be necessary true for subpartitions. 
> >> It
> >> may happen parent partition isn't block aligned (effectively disabling
> >> write access) while subpartition may fit blocks nicely. In such case 
> >> all
> >> checks should be run again (starting with original flags value).
> >> 
> >> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> >> ---
> >>  drivers/mtd/mtdcore.c   | 2 ++
> >>  drivers/mtd/mtdpart.c   | 3 ++-
> >>  include/linux/mtd/mtd.h | 1 +
> >>  3 files changed, 5 insertions(+), 1 deletion(-)
> >> 
> >> diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
> >> index 97ac219c082e..2d24701255e5 100644
> >> --- a/drivers/mtd/mtdcore.c
> >> +++ b/drivers/mtd/mtdcore.c
> >> @@ -665,6 +665,8 @@ static void mtd_set_dev_defaults(struct mtd_info 
> >> *mtd)
> >>  	} else {
> >>  		pr_debug("mtd device won't show a device symlink in sysfs\n");
> >>  	}
> >> +
> >> +	mtd->orig_flags = mtd->flags;
> >>  }
> >> 
> >>  /**
> >> diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
> >> index 99c460facd5e..2b6e53af47da 100644
> >> --- a/drivers/mtd/mtdpart.c
> >> +++ b/drivers/mtd/mtdpart.c
> >> @@ -346,7 +346,8 @@ static struct mtd_part *allocate_partition(struct 
> >> mtd_info *parent,
> >> 
> >>  	/* set up the MTD object for this partition */
> >>  	slave->mtd.type = parent->type;
> >> -	slave->mtd.flags = parent->flags & ~part->mask_flags;
> >> +	slave->mtd.flags = parent->orig_flags & ~part->mask_flags;
> >> +	slave->mtd.orig_flags = slave->mtd.flags;
> >>  	slave->mtd.size = part->size;
> >>  	slave->mtd.writesize = parent->writesize;
> >>  	slave->mtd.writebufsize = parent->writebufsize;
> >> diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
> >> index cd0be91bdefa..b491a08e87e5 100644
> >> --- a/include/linux/mtd/mtd.h
> >> +++ b/include/linux/mtd/mtd.h
> >> @@ -207,6 +207,7 @@ struct mtd_debug_info {
> >>  struct mtd_info {
> >>  	u_char type;
> >>  	uint32_t flags;
> >> +	uint32_t orig_flags; /* Flags as before running mtd checks */  
> > 
> > Hm, I'm not a big fan of this orig_flags field. I'd prefer to have
> > Miquel's patch series [1] ported to Linus, so that master can be
> > retrieved with a simple loop:
> > 
> > struct mtd_info *mtd_get_master(struct mtd_info *mtd)
> > {
> > 	struct mtd_info *master = mtd;
> > 
> > 	while (master->parent)
> > 		master = master->parent;
> > }
> > 
> > [1]https://www.mail-archive.com/u-boot@lists.denx.de/msg297465.html  
> 
> Retrieving master is not a big deal, but I don't think it's going to
> help. Just because master is writeable doesn't mean every subpartition
> should be.
> 
> Let me try to provide some example covering both cases.
> 
> . "spi0.0" orig_flags:MTD_WRITEABLE flags:MTD_WRITEABLE
> ├── "boot" orig_flags:0 flags:0
> ├── "firmware" orig_flags:MTD_WRITEABLE flags:0 (misaligned partition)
>      ├── "header" flags: ? (misaligned partition)
>      ├── "rootfs" flags: ? (aligned partition)
>      └── "kernel" flags: ? (aligned partition)
> └── "calibration" flags:0
>      ├── "wifi0" flags: ?
>      └── "wifi1" flags: ?
> 
> My patch is intended to fix "rootfs" and "kernel" not having
> MTD_WRITEABLE flag. The reason for lacking flag is mtd subsystem
> (correctly) dropping it in the allocate_partition() due to misalignment.
> 
> If we start checking flags of the master however that will result in
> "wifi0" and "wifi1" receiving MTD_WRITEABLE. The intention of
> "calibration"  was to make all calibration data (unit specific thing) RO
> only.

I see.

> 
> I don't have any better idea than "orig_flags" that would help solving
> this problem :(

Me neither. I just misunderstood what you were trying to do.

  reply	other threads:[~2018-11-20 10:08 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-20  8:55 [PATCH] mtd: keep original flags for every struct mtd_info Rafał Miłecki
2018-11-20  9:13 ` Boris Brezillon
2018-11-20  9:43   ` Rafał Miłecki
2018-11-20 10:07     ` Boris Brezillon [this message]
2018-12-03  7:53 ` Boris Brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181120110757.527e6f3f@bbrezillon \
    --to=boris.brezillon@bootlin.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=rafal@milecki.pl \
    --cc=richard@nod.at \
    --cc=zajec5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.