From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Linux Media Mailing List <linux-media@vger.kernel.org>
Subject: Re: [GIT PULL FOR v4.18] v2: Various fixes/improvements
Date: Thu, 22 Nov 2018 18:52:07 -0200 [thread overview]
Message-ID: <20181122185207.3e50acb1@coco.lan> (raw)
In-Reply-To: <b9c05ebb-6cb3-d6b3-f2e4-48720f3a05bd@xs4all.nl>
Em Tue, 8 May 2018 12:48:45 +0200
Hans Verkuil <hverkuil@xs4all.nl> escreveu:
> Fixes/improvements all over the place.
>
> Changes since v1:
>
> Replaced "media: media-device: fix ioctl function types" with the v2 version
> of that patch. My fault, I missed Sakari's request for a change of v1.
You should seriously review how you're adding SOBs... there are
even some like:
Signed-off-by Hans Verkuil <hans.verkuil>
Reported-by: syzbot+69780d144754b8071f4b@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> # for v4.20 and up
Signed-off-by Hans Verkuil <hansverk@cisco.com>
On this series. Again, none matching the Author's email.
PS.: one quick way to fix it is by using git filter.
You could do something like:
$ git filter-branch -f --msg-filter 'cat|grep -v "Signed-off-by: Your Name"; echo "Signed-off-by: Your Name <your.new@email>"' origin/master..
And fix all of them with a single command.
>
> Regards,
>
> Hans
>
> The following changes since commit f10379aad39e9da8bc7d1822e251b5f0673067ef:
>
> media: include/video/omapfb_dss.h: use IS_ENABLED() (2018-05-05 11:45:51 -0400)
>
> are available in the Git repository at:
>
> git://linuxtv.org/hverkuil/media_tree.git for-v4.18b
>
> for you to fetch changes up to 171d364998d1e2373c12b93924fe63cc71586101:
>
> media: media-device: fix ioctl function types (2018-05-08 12:40:23 +0200)
>
> ----------------------------------------------------------------
> Arvind Yadav (2):
> platform: Use gpio_is_valid()
> sta2x11: Use gpio_is_valid() and remove unnecessary check
>
> Brad Love (4):
> em28xx: Fix DualHD broken second tuner
> intel-ipu3: Kconfig coding style issue
> cec: Kconfig coding style issue
> saa7164: Fix driver name in debug output
>
> Colin Ian King (1):
> media/usbvision: fix spelling mistake: "compresion" -> "compression"
>
> Dan Carpenter (1):
> media: vpbe_venc: potential uninitialized variable in ven_sub_dev_init()
>
> Fengguang Wu (1):
> media: vcodec: fix ptr_ret.cocci warnings
>
> Hans Verkuil (2):
> cec-gpio: use GPIOD_OUT_HIGH_OPEN_DRAIN
> v4l2-dev.h: fix doc warning
>
> Jacopo Mondi (1):
> media: renesas-ceu: Set mbus_fmt on subdev operations
>
> Jan Luebbe (1):
> media: imx-csi: fix burst size for 16 bit
>
> Jasmin Jessich (2):
> media: Use ktime_set() in pt1.c
> media: Revert cleanup ktime_set() usage
>
> Julia Lawall (1):
> pvrusb2: delete unneeded include
>
> Niklas Söderlund (1):
> media: entity: fix spelling for media_entity_get_fwnode_pad()
>
> Philipp Zabel (4):
> media: coda: reuse coda_s_fmt_vid_cap to propagate format in coda_s_fmt_vid_out
> media: coda: do not try to propagate format if capture queue busy
> media: coda: set colorimetry on coded queue
> media: imx: add 16-bit grayscale support
>
> Robin Murphy (1):
> media: videobuf-dma-sg: Fix dma_{sync,unmap}_sg() calls
>
> Sami Tolvanen (1):
> media: media-device: fix ioctl function types
>
> Simon Que (1):
> v4l2-core: Rename array 'video_driver' to 'video_drivers'
>
> Souptick Joarder (1):
> videobuf: Change return type to vm_fault_t
>
> Wolfram Sang (1):
> media: platform: am437x: simplify getting .drvdata
>
> drivers/media/Kconfig | 12 ++++++------
> drivers/media/dvb-core/dmxdev.c | 2 +-
> drivers/media/media-device.c | 21 +++++++++++----------
> drivers/media/pci/cx88/cx88-input.c | 6 ++++--
> drivers/media/pci/intel/ipu3/Kconfig | 12 ++++++------
> drivers/media/pci/pt1/pt1.c | 2 +-
> drivers/media/pci/pt3/pt3.c | 2 +-
> drivers/media/pci/saa7164/saa7164-fw.c | 3 ++-
> drivers/media/pci/sta2x11/sta2x11_vip.c | 31 +++++++++++++++----------------
> drivers/media/platform/am437x/am437x-vpfe.c | 6 ++----
> drivers/media/platform/cec-gpio/cec-gpio.c | 2 +-
> drivers/media/platform/coda/coda-common.c | 45 +++++++++++++++++++++++++++++++--------------
> drivers/media/platform/davinci/vpbe_venc.c | 2 +-
> drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 5 +----
> drivers/media/platform/renesas-ceu.c | 20 +++++++++++++++-----
> drivers/media/platform/via-camera.c | 2 +-
> drivers/media/usb/em28xx/em28xx-dvb.c | 2 +-
> drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c | 1 -
> drivers/media/usb/usbvision/usbvision-core.c | 2 +-
> drivers/media/v4l2-core/v4l2-dev.c | 22 +++++++++++-----------
> drivers/media/v4l2-core/videobuf-dma-sg.c | 6 +++---
> drivers/staging/media/imx/imx-media-csi.c | 3 ++-
> drivers/staging/media/imx/imx-media-utils.c | 9 +++++++++
> include/media/media-entity.h | 2 +-
> include/media/v4l2-dev.h | 1 +
> 25 files changed, 128 insertions(+), 93 deletions(-)
Thanks,
Mauro
next prev parent reply other threads:[~2018-11-23 7:33 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-08 10:48 [GIT PULL FOR v4.18] v2: Various fixes/improvements Hans Verkuil
2018-11-22 20:52 ` Mauro Carvalho Chehab [this message]
2018-11-22 22:26 ` Hans Verkuil
2018-11-22 22:43 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181122185207.3e50acb1@coco.lan \
--to=mchehab+samsung@kernel.org \
--cc=hverkuil@xs4all.nl \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.