From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Subject: [PATCH 3/6] staging: rtl8188eu: add spaces around operators in hal8188e_rate_adaptive.c
Date: Wed, 28 Nov 2018 18:29:03 +0100 [thread overview]
Message-ID: <20181128172906.1694-3-straube.linux@gmail.com> (raw)
In-Reply-To: <20181128172906.1694-1-straube.linux@gmail.com>
Add spaces around operators to follow kernel coding style.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
.../rtl8188eu/hal/hal8188e_rate_adaptive.c | 54 ++++++++++---------
1 file changed, 29 insertions(+), 25 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/hal8188e_rate_adaptive.c b/drivers/staging/rtl8188eu/hal/hal8188e_rate_adaptive.c
index 79e13d076553..ccd7bb24302b 100644
--- a/drivers/staging/rtl8188eu/hal/hal8188e_rate_adaptive.c
+++ b/drivers/staging/rtl8188eu/hal/hal8188e_rate_adaptive.c
@@ -18,7 +18,7 @@ Major Change History:
/* Rate adaptive parameters */
-static u8 RETRY_PENALTY[PERENTRY][RETRYSIZE+1] = {
+static u8 RETRY_PENALTY[PERENTRY][RETRYSIZE + 1] = {
{5, 4, 3, 2, 0, 3}, /* 92 , idx = 0 */
{6, 5, 4, 3, 0, 4}, /* 86 , idx = 1 */
{6, 5, 4, 2, 0, 4}, /* 81 , idx = 2 */
@@ -44,7 +44,7 @@ static u8 RETRY_PENALTY[PERENTRY][RETRYSIZE+1] = {
{49, 16, 16, 0, 0, 48}
}; /* 3, idx = 0x16 */
-static u8 PT_PENALTY[RETRYSIZE+1] = {34, 31, 30, 24, 0, 32};
+static u8 PT_PENALTY[RETRYSIZE + 1] = {34, 31, 30, 24, 0, 32};
/* wilson modify */
static u8 RETRY_PENALTY_IDX[2][RATESIZE] = {
@@ -146,7 +146,7 @@ static int odm_RateDown_8188E(struct odm_dm_struct *dm_odm,
pRaInfo->RateSGI = 0;
} else if (RateID > LowestRate) {
if (RateID > 0) {
- for (i = RateID-1; i > LowestRate; i--) {
+ for (i = RateID - 1; i > LowestRate; i--) {
if (pRaInfo->RAUseRate & BIT(i)) {
RateID = i;
goto RateDownFinish;
@@ -216,7 +216,7 @@ static int odm_RateUp_8188E(
("%s():Decrease RPT Timing\n", __func__));
if (RateID < HighestRate) {
- for (i = RateID+1; i <= HighestRate; i++) {
+ for (i = RateID + 1; i <= HighestRate; i++) {
if (pRaInfo->RAUseRate & BIT(i)) {
RateID = i;
goto RateUpfinish;
@@ -232,7 +232,7 @@ static int odm_RateUp_8188E(
}
RateUpfinish:
if (pRaInfo->RAWaitingCounter ==
- (4+PendingForRateUpFail[pRaInfo->RAPendingCounter]))
+ (4 + PendingForRateUpFail[pRaInfo->RAPendingCounter]))
pRaInfo->RAWaitingCounter = 0;
else
pRaInfo->RAWaitingCounter++;
@@ -253,8 +253,10 @@ static void odm_ResetRaCounter_8188E(struct odm_ra_info *pRaInfo)
u8 RateID;
RateID = pRaInfo->DecisionRate;
- pRaInfo->NscUp = (N_THRESHOLD_HIGH[RateID]+N_THRESHOLD_LOW[RateID])>>1;
- pRaInfo->NscDown = (N_THRESHOLD_HIGH[RateID]+N_THRESHOLD_LOW[RateID])>>1;
+ pRaInfo->NscUp = (N_THRESHOLD_HIGH[RateID] +
+ N_THRESHOLD_LOW[RateID]) >> 1;
+ pRaInfo->NscDown = (N_THRESHOLD_HIGH[RateID] +
+ N_THRESHOLD_LOW[RateID]) >> 1;
}
static void odm_RateDecision_8188E(struct odm_dm_struct *dm_odm,
@@ -317,7 +319,7 @@ static void odm_RateDecision_8188E(struct odm_dm_struct *dm_odm,
else
pRaInfo->NscUp = 0;
- ODM_RT_TRACE(dm_odm, ODM_COMP_RATE_ADAPTIVE|ODM_COMP_INIT, ODM_DBG_LOUD,
+ ODM_RT_TRACE(dm_odm, ODM_COMP_RATE_ADAPTIVE | ODM_COMP_INIT, ODM_DBG_LOUD,
(" RssiStaRa = %d RtyPtID =%d PenaltyID1 = 0x%x PenaltyID2 = 0x%x RateID =%d NscDown =%d NscUp =%d SGI =%d\n",
pRaInfo->RssiStaRA, RtyPtID, PenaltyID1, PenaltyID2, RateID, pRaInfo->NscDown, pRaInfo->NscUp, pRaInfo->RateSGI));
if ((pRaInfo->NscDown < N_THRESHOLD_LOW[RateID]) ||
@@ -357,41 +359,41 @@ static int odm_ARFBRefresh_8188E(struct odm_dm_struct *dm_odm, struct odm_ra_inf
switch (pRaInfo->RateID) {
case RATR_INX_WIRELESS_NGB:
- pRaInfo->RAUseRate = (pRaInfo->RateMask)&0x0f8ff015;
+ pRaInfo->RAUseRate = pRaInfo->RateMask & 0x0f8ff015;
break;
case RATR_INX_WIRELESS_NG:
- pRaInfo->RAUseRate = (pRaInfo->RateMask)&0x0f8ff010;
+ pRaInfo->RAUseRate = pRaInfo->RateMask & 0x0f8ff010;
break;
case RATR_INX_WIRELESS_NB:
- pRaInfo->RAUseRate = (pRaInfo->RateMask)&0x0f8ff005;
+ pRaInfo->RAUseRate = pRaInfo->RateMask & 0x0f8ff005;
break;
case RATR_INX_WIRELESS_N:
- pRaInfo->RAUseRate = (pRaInfo->RateMask)&0x0f8ff000;
+ pRaInfo->RAUseRate = pRaInfo->RateMask & 0x0f8ff000;
break;
case RATR_INX_WIRELESS_GB:
- pRaInfo->RAUseRate = (pRaInfo->RateMask)&0x00000ff5;
+ pRaInfo->RAUseRate = pRaInfo->RateMask & 0x00000ff5;
break;
case RATR_INX_WIRELESS_G:
- pRaInfo->RAUseRate = (pRaInfo->RateMask)&0x00000ff0;
+ pRaInfo->RAUseRate = pRaInfo->RateMask & 0x00000ff0;
break;
case RATR_INX_WIRELESS_B:
- pRaInfo->RAUseRate = (pRaInfo->RateMask)&0x0000000d;
+ pRaInfo->RAUseRate = pRaInfo->RateMask & 0x0000000d;
break;
case 12:
MaskFromReg = usb_read32(adapt, REG_ARFR0);
- pRaInfo->RAUseRate = (pRaInfo->RateMask)&MaskFromReg;
+ pRaInfo->RAUseRate = pRaInfo->RateMask & MaskFromReg;
break;
case 13:
MaskFromReg = usb_read32(adapt, REG_ARFR1);
- pRaInfo->RAUseRate = (pRaInfo->RateMask)&MaskFromReg;
+ pRaInfo->RAUseRate = pRaInfo->RateMask & MaskFromReg;
break;
case 14:
MaskFromReg = usb_read32(adapt, REG_ARFR2);
- pRaInfo->RAUseRate = (pRaInfo->RateMask)&MaskFromReg;
+ pRaInfo->RAUseRate = pRaInfo->RateMask & MaskFromReg;
break;
case 15:
MaskFromReg = usb_read32(adapt, REG_ARFR3);
- pRaInfo->RAUseRate = (pRaInfo->RateMask)&MaskFromReg;
+ pRaInfo->RAUseRate = pRaInfo->RateMask & MaskFromReg;
break;
default:
pRaInfo->RAUseRate = (pRaInfo->RateMask);
@@ -400,7 +402,7 @@ static int odm_ARFBRefresh_8188E(struct odm_dm_struct *dm_odm, struct odm_ra_inf
/* Highest rate */
if (pRaInfo->RAUseRate) {
for (i = RATESIZE; i >= 0; i--) {
- if ((pRaInfo->RAUseRate)&BIT(i)) {
+ if (pRaInfo->RAUseRate & BIT(i)) {
pRaInfo->HighestRate = i;
break;
}
@@ -512,15 +514,17 @@ static void odm_PTDecision_8188E(struct odm_ra_info *pRaInfo)
j >>= 1;
temp_stage = (pRaInfo->PTStage + 1) >> 1;
if (temp_stage > j)
- stage_id = temp_stage-j;
+ stage_id = temp_stage - j;
else
stage_id = 0;
- pRaInfo->PTSmoothFactor = (pRaInfo->PTSmoothFactor>>1) + (pRaInfo->PTSmoothFactor>>2) + stage_id*16+2;
+ pRaInfo->PTSmoothFactor = (pRaInfo->PTSmoothFactor >> 1) +
+ (pRaInfo->PTSmoothFactor >> 2) +
+ stage_id * 16 + 2;
if (pRaInfo->PTSmoothFactor > 192)
pRaInfo->PTSmoothFactor = 192;
stage_id = pRaInfo->PTSmoothFactor >> 6;
- temp_stage = stage_id*2;
+ temp_stage = stage_id * 2;
if (temp_stage != 0)
temp_stage -= 1;
if (pRaInfo->DROP > 3)
@@ -579,8 +583,8 @@ int ODM_RAInfo_Init(struct odm_dm_struct *dm_odm, u8 macid)
pRaInfo->PreRssiStaRA = 0;
pRaInfo->SGIEnable = 0;
pRaInfo->RAUseRate = 0xffffffff;
- pRaInfo->NscDown = (N_THRESHOLD_HIGH[0x13]+N_THRESHOLD_LOW[0x13])/2;
- pRaInfo->NscUp = (N_THRESHOLD_HIGH[0x13]+N_THRESHOLD_LOW[0x13])/2;
+ pRaInfo->NscDown = (N_THRESHOLD_HIGH[0x13] + N_THRESHOLD_LOW[0x13]) / 2;
+ pRaInfo->NscUp = (N_THRESHOLD_HIGH[0x13] + N_THRESHOLD_LOW[0x13]) / 2;
pRaInfo->RateSGI = 0;
pRaInfo->Active = 1; /* Active is not used at present. by page, 110819 */
pRaInfo->RptTime = 0x927c;
--
2.19.2
next prev parent reply other threads:[~2018-11-28 17:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-28 17:29 [PATCH 1/6] staging: rtl8188eu: use __func__ in hal8188e_rate_adaptive.c Michael Straube
2018-11-28 17:29 ` [PATCH 2/6] staging: rtl8188eu: remove parentheses " Michael Straube
2018-11-28 17:29 ` Michael Straube [this message]
2018-11-28 17:29 ` [PATCH 4/6] staging: rtl8188eu: cleanup lines ending with '(' Michael Straube
2018-11-28 17:29 ` [PATCH 5/6] staging: rtl8188eu: cleanup alignment issues in hal8188e_rate_adaptive.c Michael Straube
2018-11-28 17:29 ` [PATCH 6/6] staging: rtl8188eu: cleanup comment " Michael Straube
2018-11-28 19:49 ` [PATCH 1/6] staging: rtl8188eu: use __func__ " Dan Carpenter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181128172906.1694-3-straube.linux@gmail.com \
--to=straube.linux@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.