From: Stephen Hemminger <stephen@networkplumber.org>
To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: netdev@vger.kernel.org
Subject: No address after suspend/resume with 4.18
Date: Fri, 30 Nov 2018 15:26:15 -0800 [thread overview]
Message-ID: <20181130152615.6082a4da@xeon-e3> (raw)
On my box with Debian testing, I see a new problem with suspend/resume of wired network device.
Using stock Debian kernel 4.18.0-2-amd64
After suspend/resume cycle, IP address is lost.
Device Info:
$ /sbin/ethtool -i enp12s0
driver: igb
version: 5.4.0-k
firmware-version: 0. 6-1
expansion-rom-version:
bus-info: 0000:0c:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
$ lspci -v -s 0000:0c:00.0
0c:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03)
Subsystem: Gigabyte Technology Co., Ltd I211 Gigabit Network Connection
Flags: bus master, fast devsel, latency 0, IRQ 17, NUMA node 0
Memory at dfb00000 (32-bit, non-prefetchable) [size=128K]
I/O ports at c000 [size=32]
Memory at dfb20000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
State before suspend:
$ ip addr show dev enp12s0
4: enp12s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 1c:1b:0d:0a:4b:0e brd ff:ff:ff:ff:ff:ff
inet 192.168.1.18/24 brd 192.168.1.255 scope global enp12s0
valid_lft forever preferred_lft forever
State after resume:
$ ip addr show dev enp12s0
4: enp12s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 1c:1b:0d:0a:4b:0e brd ff:ff:ff:ff:ff:f
Doing ifdown/ifup which restarts the DHCP client does restore the address.
Not sure if this is a kernel issue with carrier handling, Intel driver issue, or DHCP client issue.
next reply other threads:[~2018-12-01 10:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-30 23:26 Stephen Hemminger [this message]
2018-11-30 23:34 ` No address after suspend/resume with 4.18 Jeff Kirsher
2018-12-03 21:19 ` Jeff Kirsher
2018-12-03 21:45 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181130152615.6082a4da@xeon-e3 \
--to=stephen@networkplumber.org \
--cc=jeffrey.t.kirsher@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.