From: Jonathan Cameron <jic23@kernel.org>
To: Slawomir Stepien <sst@poczta.fm>
Cc: lars@metafoo.de, Michael.Hennerich@analog.com, knaack.h@gmx.de,
pmeerw@pmeerw.net, linux-iio@vger.kernel.org,
gregkh@linuxfoundation.org
Subject: Re: [PATCH 2/3] staging: iio: adc: ad7280a: split ad7280_attr_init() to more functions
Date: Sun, 2 Dec 2018 15:47:01 +0000 [thread overview]
Message-ID: <20181202154701.160243b9@archlinux> (raw)
In-Reply-To: <20181202115830.20363-3-sst@poczta.fm>
On Sun, 2 Dec 2018 12:58:29 +0100
Slawomir Stepien <sst@poczta.fm> wrote:
> The ad7280_attr_init function has been split into more specific
> functions to increase the code readability.
>
> Signed-off-by: Slawomir Stepien <sst@poczta.fm>
> ---
> drivers/staging/iio/adc/ad7280a.c | 79 +++++++++++++++++++------------
> 1 file changed, 48 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c
> index a6b1bdd9f372..6faa85bf6f7e 100644
> --- a/drivers/staging/iio/adc/ad7280a.c
> +++ b/drivers/staging/iio/adc/ad7280a.c
> @@ -592,11 +592,49 @@ static int ad7280_channel_init(struct ad7280_state *st)
> return cnt + 1;
> }
>
> +static int ad7280_balance_switch_attr_init(struct ad7280_state *st, int cnt,
> + int dev, int ch)
> +{
> + struct iio_dev_attr *attr = &st->iio_attr[cnt];
I would pass this in to the function (and the dev you need below) to make the
scope of what the function is doing more obvious.
> +
> + attr->address = ad7280a_devaddr(dev) << 8 | ch;
> + attr->dev_attr.attr.mode = 0644;
> + attr->dev_attr.show = ad7280_show_balance_sw;
> + attr->dev_attr.store = ad7280_store_balance_sw;
> + attr->dev_attr.attr.name = devm_kasprintf(&st->spi->dev, GFP_KERNEL,
> + "in%d-in%d_balance_switch_en",
> + ch, ch + 1);
> + if (!attr->dev_attr.attr.name)
> + return -ENOMEM;
> +
> + ad7280_attributes[cnt] = &attr->dev_attr.attr;
> +
> + return 0;
> +}
> +
> +static int ad7280_balance_timer_attr_init(struct ad7280_state *st, int cnt,
> + int dev, int ch)
> +{
> + struct iio_dev_attr *attr = &st->iio_attr[cnt];
> +
> + attr->address = ad7280a_devaddr(dev) << 8 | (AD7280A_CB1_TIMER + ch);
> + attr->dev_attr.attr.mode = 0644;
> + attr->dev_attr.show = ad7280_show_balance_timer;
> + attr->dev_attr.store = ad7280_store_balance_timer;
> + attr->dev_attr.attr.name = devm_kasprintf(&st->spi->dev, GFP_KERNEL,
> + "in%d-in%d_balance_timer",
> + ch, ch + 1);
> + if (!attr->dev_attr.attr.name)
> + return -ENOMEM;
> +
> + ad7280_attributes[cnt] = &attr->dev_attr.attr;
> +
> + return 0;
> +}
> +
> static int ad7280_attr_init(struct ad7280_state *st)
> {
> - int dev, ch, cnt;
> - unsigned int index;
> - struct iio_dev_attr *iio_attr;
> + int dev, ch, cnt, ret;
>
> st->iio_attr = devm_kcalloc(&st->spi->dev, 2, sizeof(*st->iio_attr) *
> (st->slave_num + 1) * AD7280A_CELLS_PER_DEV,
> @@ -607,35 +645,14 @@ static int ad7280_attr_init(struct ad7280_state *st)
> for (dev = 0, cnt = 0; dev <= st->slave_num; dev++)
> for (ch = AD7280A_CELL_VOLTAGE_1; ch <= AD7280A_CELL_VOLTAGE_6;
> ch++, cnt++) {
> - iio_attr = &st->iio_attr[cnt];
> - index = dev * AD7280A_CELLS_PER_DEV + ch;
> - iio_attr->address = ad7280a_devaddr(dev) << 8 | ch;
> - iio_attr->dev_attr.attr.mode = 0644;
> - iio_attr->dev_attr.show = ad7280_show_balance_sw;
> - iio_attr->dev_attr.store = ad7280_store_balance_sw;
> - iio_attr->dev_attr.attr.name =
> - devm_kasprintf(&st->spi->dev, GFP_KERNEL,
> - "in%d-in%d_balance_switch_en",
> - index, index + 1);
> - if (!iio_attr->dev_attr.attr.name)
> - return -ENOMEM;
> -
> - ad7280_attributes[cnt] = &iio_attr->dev_attr.attr;
> + ret = ad7280_balance_switch_attr_init(st, cnt, dev, ch);
> + if (ret < 0)
> + return ret;
> +
> cnt++;
> - iio_attr = &st->iio_attr[cnt];
> - iio_attr->address = ad7280a_devaddr(dev) << 8 |
> - (AD7280A_CB1_TIMER + ch);
> - iio_attr->dev_attr.attr.mode = 0644;
> - iio_attr->dev_attr.show = ad7280_show_balance_timer;
> - iio_attr->dev_attr.store = ad7280_store_balance_timer;
> - iio_attr->dev_attr.attr.name =
> - devm_kasprintf(&st->spi->dev, GFP_KERNEL,
> - "in%d-in%d_balance_timer",
> - index, index + 1);
> - if (!iio_attr->dev_attr.attr.name)
> - return -ENOMEM;
> -
> - ad7280_attributes[cnt] = &iio_attr->dev_attr.attr;
> + ret = ad7280_balance_timer_attr_init(st, cnt, dev, ch);
> + if (ret < 0)
> + return ret;
> }
>
> ad7280_attributes[cnt] = NULL;
next prev parent reply other threads:[~2018-12-02 15:47 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-02 11:58 [PATCH 0/3] staging: iio: adc: ad7280a: channel and attr init refactor Slawomir Stepien
2018-12-02 11:58 ` [PATCH 1/3] staging: iio: adc: ad7280a: split ad7280_channel_init() to more functions Slawomir Stepien
2018-12-02 15:45 ` Jonathan Cameron
2018-12-03 20:06 ` Slawomir Stepien
2018-12-04 12:43 ` Jonathan Cameron
2018-12-02 11:58 ` [PATCH 2/3] staging: iio: adc: ad7280a: split ad7280_attr_init() " Slawomir Stepien
2018-12-02 15:47 ` Jonathan Cameron [this message]
2018-12-02 11:58 ` [PATCH 3/3] staging: iio: adc: ad7280a: add braces to complex for loops Slawomir Stepien
2018-12-02 15:47 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181202154701.160243b9@archlinux \
--to=jic23@kernel.org \
--cc=Michael.Hennerich@analog.com \
--cc=gregkh@linuxfoundation.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=sst@poczta.fm \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.