From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/4] Convert CONFIG_BOARD_TYPES to Kconfig
Date: Mon, 10 Dec 2018 08:53:08 +0100 [thread overview]
Message-ID: <20181210085308.4a2dde71@jawa> (raw)
In-Reply-To: <20181210014440.150839-2-sjg@chromium.org>
Hi Simon,
> This converts the following to Kconfig:
> CONFIG_BOARD_TYPES
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> arch/arm/mach-exynos/Kconfig | 8 ++++++++
> configs/odroid-xu3_defconfig | 2 +-
> configs/odroid_defconfig | 2 +-
> include/configs/axs10x.h | 1 -
> include/configs/hsdk.h | 1 -
> include/configs/odroid.h | 1 -
> include/configs/odroid_xu3.h | 1 -
> scripts/config_whitelist.txt | 1 -
> 8 files changed, 10 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/mach-exynos/Kconfig
> b/arch/arm/mach-exynos/Kconfig index ed04369cfae..33323d17f4b 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -166,4 +166,12 @@ source "board/samsung/espresso7420/Kconfig"
> config SPL_LDSCRIPT
> default "board/samsung/common/exynos-uboot-spl.lds" if
> ARCH_EXYNOS5 || ARCH_EXYNOS4
> +config BOARD_TYPES
> + bool "Call get_board_type() to get and display the board
> type"
> + help
> + If this option is enabled, checkboard() will call
> get_board_type()
> + to get a string containing the board type and this will be
> + displayed immediately after the model is shown on the
> console
> + early in boot.
> +
> endif
> diff --git a/configs/odroid-xu3_defconfig
> b/configs/odroid-xu3_defconfig index d5c7cc7129d..f6f05b29483 100644
> --- a/configs/odroid-xu3_defconfig
> +++ b/configs/odroid-xu3_defconfig
> @@ -2,6 +2,7 @@ CONFIG_ARM=y
> CONFIG_ARCH_EXYNOS=y
> CONFIG_SYS_TEXT_BASE=0x43E00000
> CONFIG_ARCH_EXYNOS5=y
> +CONFIG_BOARD_TYPES=y
> CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1/HC2"
> CONFIG_DISTRO_DEFAULTS=y
> CONFIG_NR_DRAM_BANKS=8
> @@ -47,7 +48,6 @@ CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_DWC3=y
> CONFIG_USB_DWC3_GADGET=y
> CONFIG_USB_DWC3_PHY_SAMSUNG=y
> -CONFIG_USB_STORAGE=y
This is interesting - we add BOARD_TYPES and then USB_STORAGE is going
to be removed.
> CONFIG_USB_GADGET=y
> CONFIG_USB_GADGET_MANUFACTURER="Samsung"
> CONFIG_USB_GADGET_VENDOR_NUM=0x04e8
> diff --git a/configs/odroid_defconfig b/configs/odroid_defconfig
> index 594800fc50c..184bb62c1c1 100644
> --- a/configs/odroid_defconfig
> +++ b/configs/odroid_defconfig
> @@ -3,6 +3,7 @@ CONFIG_ARCH_EXYNOS=y
> CONFIG_SYS_TEXT_BASE=0x43e00000
> CONFIG_ARCH_EXYNOS4=y
> CONFIG_TARGET_ODROID=y
> +CONFIG_BOARD_TYPES=y
> CONFIG_DISTRO_DEFAULTS=y
> CONFIG_NR_DRAM_BANKS=8
> # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> @@ -47,7 +48,6 @@ CONFIG_DM_REGULATOR_MAX77686=y
> CONFIG_USB=y
> CONFIG_DM_USB=y
> CONFIG_USB_EHCI_HCD=y
> -CONFIG_USB_STORAGE=y
> CONFIG_USB_GADGET=y
> CONFIG_USB_GADGET_MANUFACTURER="Samsung"
> CONFIG_USB_GADGET_VENDOR_NUM=0x04e8
> diff --git a/include/configs/axs10x.h b/include/configs/axs10x.h
> index 1b2966fd612..a1b9e7b21d9 100644
> --- a/include/configs/axs10x.h
> +++ b/include/configs/axs10x.h
> @@ -34,7 +34,6 @@
> /*
> * This board might be of different versions so handle it
> */
> -#define CONFIG_BOARD_TYPES
>
> /*
> * NAND Flash configuration
> diff --git a/include/configs/hsdk.h b/include/configs/hsdk.h
> index cdf4fddd940..b1af1271777 100644
> --- a/include/configs/hsdk.h
> +++ b/include/configs/hsdk.h
> @@ -35,7 +35,6 @@
> /*
> * This board might be of different versions so handle it
> */
> -#define CONFIG_BOARD_TYPES
>
> /*
> * UART configuration
> diff --git a/include/configs/odroid.h b/include/configs/odroid.h
> index ad77242e380..bc044e069e0 100644
> --- a/include/configs/odroid.h
> +++ b/include/configs/odroid.h
> @@ -186,7 +186,6 @@
> * TODO: Add Odroid X support
> */
> #define CONFIG_MISC_COMMON
> -#define CONFIG_BOARD_TYPES
>
> #undef CONFIG_REVISION_TAG
>
> diff --git a/include/configs/odroid_xu3.h
> b/include/configs/odroid_xu3.h index f683ee46e39..c2363dd1eef 100644
> --- a/include/configs/odroid_xu3.h
> +++ b/include/configs/odroid_xu3.h
> @@ -86,7 +86,6 @@
> /* Set soc_rev, soc_id, board_rev, boardname, fdtfile */
> #define CONFIG_ODROID_REV_AIN 9
> #define CONFIG_REVISION_TAG
> -#define CONFIG_BOARD_TYPES
>
> #undef CONFIG_SYS_BOARD
> #define CONFIG_SYS_BOARD "odroid"
> diff --git a/scripts/config_whitelist.txt
> b/scripts/config_whitelist.txt index b8addeaf693..335977b3038 100644
> --- a/scripts/config_whitelist.txt
> +++ b/scripts/config_whitelist.txt
> @@ -132,7 +132,6 @@ CONFIG_BOARD_POSTCLK_INIT
> CONFIG_BOARD_REVISION_TAG
> CONFIG_BOARD_SIZE_LIMIT
> CONFIG_BOARD_TAURUS
> -CONFIG_BOARD_TYPES
> CONFIG_BOOGER
> CONFIG_BOOTBLOCK
> CONFIG_BOOTFILE
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181210/5ea3b14e/attachment.sig>
next prev parent reply other threads:[~2018-12-10 7:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-10 1:44 [U-Boot] [PATCH 1/4] snow: Expand U-Boot size Simon Glass
2018-12-10 1:44 ` [U-Boot] [PATCH 2/4] Convert CONFIG_BOARD_TYPES to Kconfig Simon Glass
2018-12-10 7:37 ` Alexey Brodkin
2018-12-10 7:53 ` Lukasz Majewski [this message]
2018-12-10 1:44 ` [U-Boot] [PATCH 3/4] exynos: Drop duplicate 'model' line Simon Glass
2018-12-10 1:44 ` [U-Boot] [PATCH 4/4] exynos: Convert to use CONFIG_BLK Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181210085308.4a2dde71@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.