Re: [PATCH 0/2] Graph fixes for using multiple endpoints per port

[Tony Lindgren <tony@atomide.com>]

* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [181211 03:31]:
> 
> Hi Tony
> 
> > Here are two fixes that allow me to have multiple endpoints defined in
> > the dts file for audio-graph-card. To do that, we need to fix up few
> > issues as the graph binding Documentation/devicetree/bindings/graph.txt
> > allows multiple endpoints per port. This allows configuring TDM codecs
> > for I2S for example.
> > 
> > Kuninori-san, can you please check if this makes sense to you and
> > compare against the graph binding?
> 
> This looks a little bit strange for me.
> Can you show me your DT for it ?

Sure, adding also Sebastian to Cc. Here's what I currently have for droid 4
dts with two codecs on I2S. Please just ignore the GNSS parts there..

The TDM configuration is all done in the cpcap_audio_codec via set_tdm_slot().
The modem voice call codec is a serdev driver :) I'll need some more time to
be able to post patches but it's basically working for voice calls.

Regards,

Tony

8< ---------
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -653,6 +653,28 @@
 	pinctrl-0 = <&uart1_pins>;
 	interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core 0xfc>;
+
+	modem {
+		compatible = "motorola,mapphone-mdm6600-serdev";
+		phys = <&fsusb1_phy>;
+		phy-names = "usb";
+
+		mot_mdm6600_audio: audio-codec {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+
+			port@0 {
+				mot_mdm6600_audio_codec0: endpoint {
+					remote-endpoint = <&cpu_dai_mdm>;
+				};
+			};
+		};
+
+		gnss {
+			compatible = "motorola,mapphone-mdm6600-gnss";
+		};
+	};
 };
 
 &uart3 {
@@ -746,12 +768,18 @@
 	status = "okay";
 
 	mcbsp3_port: port {
-		cpu_dai3: endpoint {
+		cpu_dai3: endpoint@0 {
 			dai-format = "dsp_a";
 			frame-master = <&cpcap_audio_codec1>;
 			bitclock-master = <&cpcap_audio_codec1>;
 			remote-endpoint = <&cpcap_audio_codec1>;
 		};
+		cpu_dai_mdm: endpoint@1 {
+			dai-format = "dsp_a";
+			frame-master = <&cpcap_audio_codec1>;
+			bitclock-master = <&cpcap_audio_codec1>;
+			remote-endpoint = <&mot_mdm6600_audio_codec0>;
+		};
 	};
 };