[U-Boot] [GIT] Pull request: u-boot-dfu (13.12.2018)

[Lukasz Majewski <lukma@denx.de>]

Hi Marek,

> On 12/12/2018 11:58 PM, Lukasz Majewski wrote:
> > Dear Marek,  
> 
> This looks quite heavy after RC1 . How thoroughly was this tested ?

I've run:

./tools/buildman/buildman.py --branch=HEAD k2 omap am335x am43 dra7
trats2 odroid-xu3 --detail --verbose --show_errors --force-build
--count=20 --output-dir=../BUILD/

on it without any issues (DTS warnings were there - as expected).


Nonetheless, this is the second "instalment" of Jean-Jacques work and
shall IMHO be treated as a one part with the code already included to
main line.

I do not expect so much changes to DFU/UDC tree from now on - hence we
can focus on fixes.

> 
> > The following changes since commit
> > 51b24944fdbfa760aa87a1ad812355e1df9c9355:
> > 
> >   usb: musb: Remove legacy CONFIG_USB_DA8XX (2018-12-12 15:23:04
> > +0100)
> > 
> > are available in the git repository at:
> > 
> >   git://git.denx.de/u-boot-dfu.git 
> > 
> > for you to fetch changes up to
> > 8a3755462f65c032528af70c6582abf89f91b2bc:
> > 
> >   configs: am335x_boneblack_vboot: enable DM_USB and RNDIS boot in
> > SPl (2018-12-12 15:35:08 +0100)
> > 
> > ----------------------------------------------------------------
> > Jean-Jacques Hiblot (20):
> >       usb: dwc3-generic: make it compatible with "ti, keystone-dwc3"
> >       board: ks2_evm: Enable the USB clocks if DM_USB is used
> >       ARM: dts: k2g-evm: enable USB0 and USB1
> >       PHY: Add phy driver for the keystone USB PHY
> >       usb: host: replace xhci-keystone driver by the generic dwc3
> > driver configs: k2g_evm: Enable DFU on K2G EVM
> >       spl: drivers: Link usb common library to SPL if USB gadget is
> > enabled spl: net: dm: usb: bind the gadget before attempting to
> > load the image phy: omap_usb2: Add support for am437x
> >       dwc3-generic: Add support for the am437x
> >       board: ti: am43xx: turn on USB clocks
> >       dts: Add a u-boot specific dtsi file for the am4372
> >       dts: am4372: Enable USB1 in SPL
> >       configs: am43xx_evm: Enable DM_USB and DM_USB_GADGET
> >       configs: am43xx: Enable RNDIS support in SPL
> >       usb: musb-new: Allow the diver not to use the set_phy_power()
> > callback usb: musb-new: Add support for DM_USB
> >       arm: am33xx: Register USB controllers if DM_USB is used but
> > not OF_CONTROL configs: am335x_evm: Do not disable DM_USB in SPL
> >       configs: am335x_boneblack_vboot: enable DM_USB and RNDIS boot
> > in SPl
> > 
> >  arch/arm/dts/am4372-generic-u-boot.dtsi  |   2 +
> >  arch/arm/dts/am4372-u-boot.dtsi          |  40 ++++++++++++++++++
> >  arch/arm/dts/am437x-gp-evm-u-boot.dtsi   |   2 +
> >  arch/arm/dts/am437x-idk-evm-u-boot.dtsi  |   2 +
> >  arch/arm/dts/am437x-sk-evm-u-boot.dtsi   |   2 +
> >  arch/arm/dts/keystone-k2g-evm.dts        |  28 +++++++++++++
> >  arch/arm/dts/keystone-k2g.dtsi           |  56
> > +++++++++++++++++++++++++ arch/arm/include/asm/omap_musb.h
> > |   8 ++++ arch/arm/mach-omap2/am33xx/board.c       |  58
> > ++++++++++++++++++++++---- board/ti/am43xx/board.c
> > |  22 ++++++++++ board/ti/ks2_evm/board.c                 |  12
> > ++++++ common/Makefile                          |   3 ++
> >  common/spl/spl_net.c                     |   4 +-
> >  configs/am335x_boneblack_vboot_defconfig |  10 +++++
> >  configs/am43xx_evm_defconfig             |  19 +++++++++
> >  configs/k2e_evm_defconfig                |   7 ++++
> >  configs/k2e_hs_evm_defconfig             |   7 ++++
> >  configs/k2g_evm_defconfig                |  12 ++++++
> >  configs/k2g_hs_evm_defconfig             |  12 ++++++
> >  configs/k2hk_evm_defconfig               |   7 ++++
> >  configs/k2hk_hs_evm_defconfig            |   7 ++++
> >  configs/k2l_evm_defconfig                |   7 ++++
> >  configs/k2l_hs_evm_defconfig             |   7 ++++
> >  drivers/Makefile                         |   1 +
> >  drivers/phy/Kconfig                      |  10 +++++
> >  drivers/phy/Makefile                     |   1 +
> >  drivers/phy/keystone-usb-phy.c           | 109
> > +++++++++++++++++++++++++++++++++++++++++++++++++
> > drivers/phy/omap-usb2-phy.c              |  45 +++++++++++++++-----
> > drivers/usb/dwc3/dwc3-generic.c          |   2 +
> > drivers/usb/host/Makefile                |   1 -
> > drivers/usb/host/xhci-keystone.c         | 240
> > -----------------------------------------------------------------------------------------------------------
> > drivers/usb/musb-new/am35x.c             |   8 ++--
> > drivers/usb/musb-new/musb_dsps.c         |   8 ++--
> > drivers/usb/musb-new/musb_gadget.c       |  11 +++++
> > drivers/usb/musb-new/musb_uboot.c        |   4 +-
> > drivers/usb/musb-new/ti-musb.c           | 181
> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------
> > include/configs/am335x_evm.h             |   1 -
> > include/configs/ti_armv7_keystone2.h     |  17 +++++--- 38 files
> > changed, 649 insertions(+), 324 deletions(-) create mode 100644
> > arch/arm/dts/am4372-u-boot.dtsi create mode 100644
> > drivers/phy/keystone-usb-phy.c delete mode 100644
> > drivers/usb/host/xhci-keystone.c
> > 
> > Travis-Ci:
> > https://travis-ci.org/lmajewski/u-boot-dfu/builds/467026476
> > 
> > This is the last instalment of patches from Jean-Jacques
> > 
> > Best regards,
> > 
> > Lukasz Majewski
> > 
> > --
> > 
> > DENX Software Engineering GmbH,      Managing Director: Wolfgang
> > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > lukma at denx.de 
> 
> 




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181213/e576f706/attachment.sig>