From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
To: sakari.ailus@iki.fi
Cc: linux-media@vger.kernel.org
Subject: Re: [GIT PULL v4 for 4.21] META_OUTPUT buffer type and the ipu3 staging driver
Date: Thu, 13 Dec 2018 10:19:05 -0200 [thread overview]
Message-ID: <20181213101905.6ad7c481@coco.lan> (raw)
In-Reply-To: <20181213120340.2oakeelp2b5w7zzq@valkosipuli.retiisi.org.uk>
Em Thu, 13 Dec 2018 14:03:40 +0200
sakari.ailus@iki.fi escreveu:
> Hi Mauro,
>
> Here's the ipu3 staging driver plus the META_OUTPUT buffer type needed to
> pass the parameters for the device. If you think this there's still time to
> get this to 4.21, then please pull. The non-staging patches have been
> around for more than half a year and they're relatively simple.
>
> Note: DO NOT WORRY about the documentation build warnings, they'll be
> adderessed by commit fdf8298f7ff167e4e7522465a3c6e6b908cdb2af from the
> documentation tree (already in linux-next).
I'm assuming you're talking about this patch:
3d9bfb19bd70 ("scripts/kernel-doc: Fix struct and struct field attribute processing")
Ok, I'll remind about that when pulling from it.
>
> Since the v1 pull request, this contains the content of the v9
> patchset (since v8):
>
> - Addressed most of Laurent's comments on the driver documentation. Some
> have been postponed and added to TODO.
>
> - Added a MAINTAINERS entry.
>
> - Removed uAPI definitions (formats etc.) added by the patches originally
> not intended to be merged (documentation outside the staging tree).
>
> - Added a patch to fix a few compiler warnings (false positives) plus
> fixed the firmware location.
>
> - checkpatch.pl warnings remain; those need to be fixed as well.
>
> since v2 pull request:
>
> - Use correct tag.
>
> since v3 pull request:
>
> - Remove extra Reviewed-by: tags.
>
> Please pull.
>
>
> The following changes since commit e159b6074c82fe31b79aad672e02fa204dbbc6d8:
>
> media: vimc: fix start stream when link is disabled (2018-12-07 13:08:41 -0500)
>
> are available in the git repository at:
>
> ssh://linuxtv.org/git/sailus/media_tree.git tags/ipu3-v8-4.20-3-sign
>
> for you to fetch changes up to 48acf4640e698334bfd9dc41a94b17b568a97b31:
>
> staging/ipu3-imgu: Add MAINTAINERS entry (2018-12-13 13:04:00 +0200)
>
> ----------------------------------------------------------------
> imgu staging driver v9
>
> ----------------------------------------------------------------
> Cao,Bing Bu (1):
> media: staging/intel-ipu3: Add dual pipe support
>
> Rajmohan Mani (1):
> doc-rst: Add Intel IPU3 documentation
>
> Sakari Ailus (6):
> v4l: Add support for V4L2_BUF_TYPE_META_OUTPUT
> docs-rst: v4l: Document V4L2_BUF_TYPE_META_OUTPUT interface
> ipu3-imgu: Fix compiler warnings
> ipu3-imgu: Fix firmware binary location
> staging/ipu3-imgu: Address documentation comments
> staging/ipu3-imgu: Add MAINTAINERS entry
>
> Tomasz Figa (2):
> media: staging/intel-ipu3: mmu: Implement driver
> media: staging/intel-ipu3: Implement DMA mapping functions
>
> Yong Zhi (12):
> media: staging/intel-ipu3: abi: Add register definitions and enum
> media: staging/intel-ipu3: abi: Add structs
> media: staging/intel-ipu3: css: Add dma buff pool utility functions
> media: staging/intel-ipu3: css: Add support for firmware management
> media: staging/intel-ipu3: css: Add static settings for image pipeline
> media: staging/intel-ipu3: css: Compute and program ccs
> media: staging/intel-ipu3: css: Initialize css hardware
> media: staging/intel-ipu3: Add css pipeline programming
> media: staging/intel-ipu3: Add v4l2 driver based on media framework
> media: staging/intel-ipu3: Add imgu top level pci device driver
> media: staging/intel-ipu3: Add Intel IPU3 meta data uAPI
> media: v4l: Add Intel IPU3 meta buffer formats
>
> Documentation/media/uapi/v4l/buffer.rst | 3 +
> Documentation/media/uapi/v4l/dev-meta.rst | 33 +-
> Documentation/media/uapi/v4l/meta-formats.rst | 1 +
> .../media/uapi/v4l/pixfmt-meta-intel-ipu3.rst | 178 +
> Documentation/media/uapi/v4l/vidioc-querycap.rst | 3 +
> Documentation/media/v4l-drivers/index.rst | 1 +
> Documentation/media/v4l-drivers/ipu3.rst | 369 +
> Documentation/media/videodev2.h.rst.exceptions | 2 +
> MAINTAINERS | 8 +
> drivers/media/common/videobuf2/videobuf2-v4l2.c | 1 +
> drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 2 +
> drivers/media/v4l2-core/v4l2-dev.c | 12 +-
> drivers/media/v4l2-core/v4l2-ioctl.c | 23 +
> drivers/staging/media/Kconfig | 2 +
> drivers/staging/media/Makefile | 1 +
> drivers/staging/media/ipu3/Kconfig | 14 +
> drivers/staging/media/ipu3/Makefile | 11 +
> drivers/staging/media/ipu3/TODO | 34 +
> drivers/staging/media/ipu3/include/intel-ipu3.h | 2785 ++++++
> drivers/staging/media/ipu3/ipu3-abi.h | 2011 ++++
> drivers/staging/media/ipu3/ipu3-css-fw.c | 265 +
> drivers/staging/media/ipu3/ipu3-css-fw.h | 188 +
> drivers/staging/media/ipu3/ipu3-css-params.c | 2943 ++++++
> drivers/staging/media/ipu3/ipu3-css-params.h | 28 +
> drivers/staging/media/ipu3/ipu3-css-pool.c | 100 +
> drivers/staging/media/ipu3/ipu3-css-pool.h | 55 +
> drivers/staging/media/ipu3/ipu3-css.c | 2391 +++++
> drivers/staging/media/ipu3/ipu3-css.h | 213 +
> drivers/staging/media/ipu3/ipu3-dmamap.c | 270 +
> drivers/staging/media/ipu3/ipu3-dmamap.h | 22 +
> drivers/staging/media/ipu3/ipu3-mmu.c | 561 ++
> drivers/staging/media/ipu3/ipu3-mmu.h | 35 +
> drivers/staging/media/ipu3/ipu3-tables.c | 9609 ++++++++++++++++++++
> drivers/staging/media/ipu3/ipu3-tables.h | 66 +
> drivers/staging/media/ipu3/ipu3-v4l2.c | 1419 +++
> drivers/staging/media/ipu3/ipu3.c | 830 ++
> drivers/staging/media/ipu3/ipu3.h | 168 +
> include/media/v4l2-ioctl.h | 17 +
> include/uapi/linux/videodev2.h | 2 +
> 39 files changed, 24659 insertions(+), 17 deletions(-)
> create mode 100644 Documentation/media/uapi/v4l/pixfmt-meta-intel-ipu3.rst
> create mode 100644 Documentation/media/v4l-drivers/ipu3.rst
> create mode 100644 drivers/staging/media/ipu3/Kconfig
> create mode 100644 drivers/staging/media/ipu3/Makefile
> create mode 100644 drivers/staging/media/ipu3/TODO
> create mode 100644 drivers/staging/media/ipu3/include/intel-ipu3.h
> create mode 100644 drivers/staging/media/ipu3/ipu3-abi.h
> create mode 100644 drivers/staging/media/ipu3/ipu3-css-fw.c
> create mode 100644 drivers/staging/media/ipu3/ipu3-css-fw.h
> create mode 100644 drivers/staging/media/ipu3/ipu3-css-params.c
> create mode 100644 drivers/staging/media/ipu3/ipu3-css-params.h
> create mode 100644 drivers/staging/media/ipu3/ipu3-css-pool.c
> create mode 100644 drivers/staging/media/ipu3/ipu3-css-pool.h
> create mode 100644 drivers/staging/media/ipu3/ipu3-css.c
> create mode 100644 drivers/staging/media/ipu3/ipu3-css.h
> create mode 100644 drivers/staging/media/ipu3/ipu3-dmamap.c
> create mode 100644 drivers/staging/media/ipu3/ipu3-dmamap.h
> create mode 100644 drivers/staging/media/ipu3/ipu3-mmu.c
> create mode 100644 drivers/staging/media/ipu3/ipu3-mmu.h
> create mode 100644 drivers/staging/media/ipu3/ipu3-tables.c
> create mode 100644 drivers/staging/media/ipu3/ipu3-tables.h
> create mode 100644 drivers/staging/media/ipu3/ipu3-v4l2.c
> create mode 100644 drivers/staging/media/ipu3/ipu3.c
> create mode 100644 drivers/staging/media/ipu3/ipu3.h
>
Thanks,
Mauro
next prev parent reply other threads:[~2018-12-13 12:19 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-13 12:03 [GIT PULL v4 for 4.21] META_OUTPUT buffer type and the ipu3 staging driver sakari.ailus
2018-12-13 12:19 ` Mauro Carvalho Chehab [this message]
2018-12-14 11:18 ` Mauro Carvalho Chehab
2019-01-07 18:01 ` Mauro Carvalho Chehab
2019-01-07 18:11 ` Mauro Carvalho Chehab
2019-01-07 22:51 ` Sakari Ailus
2019-01-08 12:27 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181213101905.6ad7c481@coco.lan \
--to=mchehab+samsung@kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.