From: Eric Biggers <ebiggers@kernel.org>
To: linux-crypto@vger.kernel.org, Herbert Xu <herbert@gondor.apana.org.au>
Cc: Rob Rice <rob.rice@broadcom.com>,
Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>,
Gilad Ben-Yossef <gilad@benyossef.com>,
Yael Chemla <yael.chemla@foss.arm.com>
Subject: [PATCH 2/3] crypto: bcm - convert to use crypto_authenc_extractkeys()
Date: Sun, 16 Dec 2018 23:23:23 -0800 [thread overview]
Message-ID: <20181217072324.16844-3-ebiggers@kernel.org> (raw)
In-Reply-To: <20181217072324.16844-1-ebiggers@kernel.org>
From: Eric Biggers <ebiggers@google.com>
Convert the bcm crypto driver to use crypto_authenc_extractkeys() so
that it picks up the fix for broken validation of rtattr::rta_len.
This also fixes the DES weak key check to actually be done on the right
key. (It was checking the authentication key, not the encryption key...)
Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Eric Biggers <ebiggers@google.com>
---
drivers/crypto/Kconfig | 1 +
drivers/crypto/bcm/cipher.c | 44 +++++++++++--------------------------
2 files changed, 14 insertions(+), 31 deletions(-)
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index d80751d48cf1e..04ab0f5d272ee 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -692,6 +692,7 @@ config CRYPTO_DEV_BCM_SPU
depends on ARCH_BCM_IPROC
depends on MAILBOX
default m
+ select CRYPTO_AUTHENC
select CRYPTO_DES
select CRYPTO_MD5
select CRYPTO_SHA1
diff --git a/drivers/crypto/bcm/cipher.c b/drivers/crypto/bcm/cipher.c
index 2ce3a16d3d10f..14fb60d73162d 100644
--- a/drivers/crypto/bcm/cipher.c
+++ b/drivers/crypto/bcm/cipher.c
@@ -2845,44 +2845,28 @@ static int aead_authenc_setkey(struct crypto_aead *cipher,
struct spu_hw *spu = &iproc_priv.spu;
struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher);
struct crypto_tfm *tfm = crypto_aead_tfm(cipher);
- struct rtattr *rta = (void *)key;
- struct crypto_authenc_key_param *param;
- const u8 *origkey = key;
- const unsigned int origkeylen = keylen;
-
- int ret = 0;
+ struct crypto_authenc_keys keys;
+ int ret;
flow_log("%s() aead:%p key:%p keylen:%u\n", __func__, cipher, key,
keylen);
flow_dump(" key: ", key, keylen);
- if (!RTA_OK(rta, keylen))
- goto badkey;
- if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
- goto badkey;
- if (RTA_PAYLOAD(rta) < sizeof(*param))
+ ret = crypto_authenc_extractkeys(&keys, key, keylen);
+ if (ret)
goto badkey;
- param = RTA_DATA(rta);
- ctx->enckeylen = be32_to_cpu(param->enckeylen);
-
- key += RTA_ALIGN(rta->rta_len);
- keylen -= RTA_ALIGN(rta->rta_len);
-
- if (keylen < ctx->enckeylen)
- goto badkey;
- if (ctx->enckeylen > MAX_KEY_SIZE)
+ if (keys.enckeylen > MAX_KEY_SIZE ||
+ keys.authkeylen > MAX_KEY_SIZE)
goto badkey;
- ctx->authkeylen = keylen - ctx->enckeylen;
-
- if (ctx->authkeylen > MAX_KEY_SIZE)
- goto badkey;
+ ctx->enckeylen = keys.enckeylen;
+ ctx->authkeylen = keys.authkeylen;
- memcpy(ctx->enckey, key + ctx->authkeylen, ctx->enckeylen);
+ memcpy(ctx->enckey, keys.enckey, keys.enckeylen);
/* May end up padding auth key. So make sure it's zeroed. */
memset(ctx->authkey, 0, sizeof(ctx->authkey));
- memcpy(ctx->authkey, key, ctx->authkeylen);
+ memcpy(ctx->authkey, keys.authkey, keys.authkeylen);
switch (ctx->alg->cipher_info.alg) {
case CIPHER_ALG_DES:
@@ -2890,7 +2874,7 @@ static int aead_authenc_setkey(struct crypto_aead *cipher,
u32 tmp[DES_EXPKEY_WORDS];
u32 flags = CRYPTO_TFM_RES_WEAK_KEY;
- if (des_ekey(tmp, key) == 0) {
+ if (des_ekey(tmp, keys.enckey) == 0) {
if (crypto_aead_get_flags(cipher) &
CRYPTO_TFM_REQ_WEAK_KEY) {
crypto_aead_set_flags(cipher, flags);
@@ -2905,7 +2889,7 @@ static int aead_authenc_setkey(struct crypto_aead *cipher,
break;
case CIPHER_ALG_3DES:
if (ctx->enckeylen == (DES_KEY_SIZE * 3)) {
- const u32 *K = (const u32 *)key;
+ const u32 *K = (const u32 *)keys.enckey;
u32 flags = CRYPTO_TFM_RES_BAD_KEY_SCHED;
if (!((K[0] ^ K[2]) | (K[1] ^ K[3])) ||
@@ -2956,9 +2940,7 @@ static int aead_authenc_setkey(struct crypto_aead *cipher,
ctx->fallback_cipher->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
ctx->fallback_cipher->base.crt_flags |=
tfm->crt_flags & CRYPTO_TFM_REQ_MASK;
- ret =
- crypto_aead_setkey(ctx->fallback_cipher, origkey,
- origkeylen);
+ ret = crypto_aead_setkey(ctx->fallback_cipher, key, keylen);
if (ret) {
flow_log(" fallback setkey() returned:%d\n", ret);
tfm->crt_flags &= ~CRYPTO_TFM_RES_MASK;
--
2.19.2
next prev parent reply other threads:[~2018-12-17 7:24 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-17 7:23 [PATCH 0/3] crypto: authenc - fix key parsing Eric Biggers
2018-12-17 7:23 ` [PATCH 1/3] crypto: authenc - fix parsing key with misaligned rta_len Eric Biggers
2018-12-17 7:23 ` Eric Biggers [this message]
2018-12-17 7:23 ` [PATCH 3/3] crypto: ccree - convert to use crypto_authenc_extractkeys() Eric Biggers
2019-01-10 14:03 ` [PATCH 0/3] crypto: authenc - fix key parsing Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181217072324.16844-3-ebiggers@kernel.org \
--to=ebiggers@kernel.org \
--cc=gilad@benyossef.com \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
--cc=raveendra.padasalagi@broadcom.com \
--cc=rob.rice@broadcom.com \
--cc=yael.chemla@foss.arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.