[PATCH v7 1/3] net/i40e: support VF request more queues

[Zhirun Yan <zhirun.yan@intel.com>]

Before this patch, VF gets a default number of queues from the PF.
This patch enables VF to request a different number. When VF configures
more queues, it will send VIRTCHNL_OP_REQUEST_QUEUES to PF to request
more queues, if success, PF will reset the VF.

User can run "port stop all", "port config port_id rxq/txq queue_num"
and "port start all" to reconfigure queue number.

Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
---
 drivers/net/i40e/i40e_ethdev_vf.c | 81 +++++++++++++++++++++++++++----
 1 file changed, 71 insertions(+), 10 deletions(-)

diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index 05dc6596b..22d39a586 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -359,6 +359,28 @@ i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct vf_cmd_info *args)
 		} while (i++ < MAX_TRY_TIMES);
 		_clear_cmd(vf);
 		break;
+	case VIRTCHNL_OP_REQUEST_QUEUES:
+		/**
+		 * ignore async reply, only wait for system message,
+		 * vf_reset = true if get VIRTCHNL_EVENT_RESET_IMPENDING,
+		 * if not, means request queues failed.
+		 */
+		err = -1;
+		do {
+			ret = i40evf_read_pfmsg(dev, &info);
+			vf->cmd_retval = info.result;
+			if (ret == I40EVF_MSG_SYS && vf->vf_reset) {
+				err = 0;
+				break;
+			} else if (ret == I40EVF_MSG_ERR ||
+					   ret == I40EVF_MSG_CMD) {
+				break;
+			}
+			rte_delay_ms(ASQ_DELAY_MS);
+			/* If don't read msg or read sys event, continue */
+		} while (i++ < MAX_TRY_TIMES);
+		_clear_cmd(vf);
+		break;
 
 	default:
 		/* for other adminq in running time, waiting the cmd done flag */
@@ -1012,6 +1034,28 @@ i40evf_add_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
 	return err;
 }
 
+static int
+i40evf_request_queues(struct rte_eth_dev *dev, uint16_t num)
+{
+	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
+	struct virtchnl_vf_res_request vfres;
+	struct vf_cmd_info args;
+	int err;
+
+	vfres.num_queue_pairs = num;
+
+	args.ops = VIRTCHNL_OP_REQUEST_QUEUES;
+	args.in_args = (u8 *)&vfres;
+	args.in_args_size = sizeof(vfres);
+	args.out_buffer = vf->aq_resp;
+	args.out_size = I40E_AQ_BUF_SZ;
+	err = i40evf_execute_vf_cmd(dev, &args);
+	if (err)
+		PMD_DRV_LOG(ERR, "fail to execute command OP_REQUEST_QUEUES");
+
+	return err;
+}
+
 static int
 i40evf_del_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
 {
@@ -1109,14 +1153,14 @@ i40evf_reset_vf(struct i40e_hw *hw)
 		return -1;
 	}
 	/**
-	  * After issuing vf reset command to pf, pf won't necessarily
-	  * reset vf, it depends on what state it exactly is. If it's not
-	  * initialized yet, it won't have vf reset since it's in a certain
-	  * state. If not, it will try to reset. Even vf is reset, pf will
-	  * set I40E_VFGEN_RSTAT to COMPLETE first, then wait 10ms and set
-	  * it to ACTIVE. In this duration, vf may not catch the moment that
-	  * COMPLETE is set. So, for vf, we'll try to wait a long time.
-	  */
+	 * After issuing vf reset command to pf, pf won't necessarily
+	 * reset vf, it depends on what state it exactly is. If it's not
+	 * initialized yet, it won't have vf reset since it's in a certain
+	 * state. If not, it will try to reset. Even vf is reset, pf will
+	 * set I40E_VFGEN_RSTAT to COMPLETE first, then wait 10ms and set
+	 * it to ACTIVE. In this duration, vf may not catch the moment that
+	 * COMPLETE is set. So, for vf, we'll try to wait a long time.
+	 */
 	rte_delay_ms(200);
 
 	ret = i40evf_check_vf_reset_done(hw);
@@ -1516,8 +1560,11 @@ RTE_PMD_REGISTER_KMOD_DEP(net_i40e_vf, "* igb_uio | vfio-pci");
 static int
 i40evf_dev_configure(struct rte_eth_dev *dev)
 {
+	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
 	struct i40e_adapter *ad =
 		I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
+	uint16_t num_queue_pairs = RTE_MAX(dev->data->nb_rx_queues,
+				dev->data->nb_tx_queues);
 
 	/* Initialize to TRUE. If any of Rx queues doesn't meet the bulk
 	 * allocation or vector Rx preconditions we will reset it.
@@ -1527,6 +1574,20 @@ i40evf_dev_configure(struct rte_eth_dev *dev)
 	ad->tx_simple_allowed = true;
 	ad->tx_vec_allowed = true;
 
+	if (num_queue_pairs > vf->vsi_res->num_queue_pairs) {
+		int ret = 0;
+
+		PMD_DRV_LOG(INFO, "change queue pairs from %u to %u",
+			    vf->vsi_res->num_queue_pairs, num_queue_pairs);
+		ret = i40evf_request_queues(dev, num_queue_pairs);
+		if (ret != 0)
+			return ret;
+
+		ret = i40evf_dev_reset(dev);
+		if (ret != 0)
+			return ret;
+	}
+
 	return i40evf_init_vlan(dev);
 }
 
@@ -2145,8 +2206,8 @@ i40evf_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
 {
 	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
 
-	dev_info->max_rx_queues = vf->vsi_res->num_queue_pairs;
-	dev_info->max_tx_queues = vf->vsi_res->num_queue_pairs;
+	dev_info->max_rx_queues = I40E_MAX_QP_NUM_PER_VF;
+	dev_info->max_tx_queues = I40E_MAX_QP_NUM_PER_VF;
 	dev_info->min_rx_bufsize = I40E_BUF_SIZE_MIN;
 	dev_info->max_rx_pktlen = I40E_FRAME_SIZE_MAX;
 	dev_info->hash_key_size = (I40E_VFQF_HKEY_MAX_INDEX + 1) * sizeof(uint32_t);
-- 
2.17.1