From: Daniel Smith <daniel.bazinga@gmail.com>
To: William Hubbs <w.d.hubbs@gmail.com>,
Chris Brannon <chris@the-brannons.com>,
Kirk Reiser <kirk@reisers.ca>,
Samuel Thibault <samuel.thibault@ens-lyon.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Smith <daniel.bazinga@gmail.com>,
speakup <speakup@linux-speakup.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: [PATCH] staging: speakup: Fix coding style
Date: Mon, 24 Dec 2018 10:12:23 +0000 [thread overview]
Message-ID: <20181224101118.GA21642@dan-VirtualBox> (raw)
Replaced text ---help--- with help as per style check patch recommendation
Signed-off-by: Daniel <daniel.bazinga@gmail.com>
---
drivers/staging/speakup/Kconfig | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/speakup/Kconfig b/drivers/staging/speakup/Kconfig
index efd6f4560d3e..d8ec780f7741 100644
--- a/drivers/staging/speakup/Kconfig
+++ b/drivers/staging/speakup/Kconfig
@@ -3,7 +3,7 @@ menu "Speakup console speech"
config SPEAKUP
depends on VT
tristate "Speakup core"
- ---help---
+ help
This is the Speakup screen reader. Think of it as a
video console for blind people. If built in to the
kernel, it can speak everything on the text console from
@@ -43,7 +43,7 @@ config SPEAKUP
if SPEAKUP
config SPEAKUP_SYNTH_ACNTSA
tristate "Accent SA synthesizer support"
- ---help---
+ help
This is the Speakup driver for the Accent SA
synthesizer. You can say y to build it into the kernel,
or m to build it as a module. See the configuration
@@ -52,7 +52,7 @@ config SPEAKUP_SYNTH_ACNTSA
config SPEAKUP_SYNTH_ACNTPC
tristate "Accent PC synthesizer support"
depends on ISA || COMPILE_TEST
- ---help---
+ help
This is the Speakup driver for the accent pc
synthesizer. You can say y to build it into the kernel,
or m to build it as a module. See the configuration
@@ -60,7 +60,7 @@ config SPEAKUP_SYNTH_ACNTPC
config SPEAKUP_SYNTH_APOLLO
tristate "Apollo II synthesizer support"
- ---help---
+ help
This is the Speakup driver for the Apollo II
synthesizer. You can say y to build it into the kernel,
or m to build it as a module. See the configuration
@@ -68,7 +68,7 @@ config SPEAKUP_SYNTH_APOLLO
config SPEAKUP_SYNTH_AUDPTR
tristate "Audapter synthesizer support"
- ---help---
+ help
This is the Speakup driver for the Audapter synthesizer.
You can say y to build it into the kernel, or m to
build it as a module. See the configuration help on the
@@ -76,7 +76,7 @@ config SPEAKUP_SYNTH_AUDPTR
config SPEAKUP_SYNTH_BNS
tristate "Braille 'n' Speak synthesizer support"
- ---help---
+ help
This is the Speakup driver for the Braille 'n' Speak
synthesizer. You can say y to build it into the kernel,
or m to build it as a module. See the configuration
@@ -84,7 +84,7 @@ config SPEAKUP_SYNTH_BNS
config SPEAKUP_SYNTH_DECTLK
tristate "DECtalk Express synthesizer support"
- ---help---
+ help
This is the Speakup driver for the DecTalk Express
synthesizer. You can say y to build it into the kernel,
@@ -93,7 +93,7 @@ config SPEAKUP_SYNTH_DECTLK
config SPEAKUP_SYNTH_DECEXT
tristate "DECtalk External (old) synthesizer support"
- ---help---
+ help
This is the Speakup driver for the DecTalk External
(old) synthesizer. You can say y to build it into the
@@ -105,7 +105,7 @@ config SPEAKUP_SYNTH_DECPC
depends on m
depends on ISA || COMPILE_TEST
tristate "DECtalk PC (big ISA card) synthesizer support"
- ---help---
+ help
This is the Speakup driver for the DecTalk PC (full
length ISA) synthesizer. You can say m to build it as
@@ -127,7 +127,7 @@ config SPEAKUP_SYNTH_DECPC
config SPEAKUP_SYNTH_DTLK
tristate "DoubleTalk PC synthesizer support"
depends on ISA || COMPILE_TEST
- ---help---
+ help
This is the Speakup driver for the internal DoubleTalk
PC synthesizer. You can say y to build it into the
@@ -138,7 +138,7 @@ config SPEAKUP_SYNTH_DTLK
config SPEAKUP_SYNTH_KEYPC
tristate "Keynote Gold PC synthesizer support"
depends on ISA || COMPILE_TEST
- ---help---
+ help
This is the Speakup driver for the Keynote Gold
PC synthesizer. You can say y to build it into the
@@ -148,7 +148,7 @@ config SPEAKUP_SYNTH_KEYPC
config SPEAKUP_SYNTH_LTLK
tristate "DoubleTalk LT/LiteTalk synthesizer support"
----help---
+help
This is the Speakup driver for the LiteTalk/DoubleTalk
LT synthesizer. You can say y to build it into the
@@ -158,7 +158,7 @@ config SPEAKUP_SYNTH_LTLK
config SPEAKUP_SYNTH_SOFT
tristate "Userspace software synthesizer support"
- ---help---
+ help
This is the software synthesizer device node. It will
register a device /dev/softsynth which midware programs
@@ -169,7 +169,7 @@ config SPEAKUP_SYNTH_SOFT
config SPEAKUP_SYNTH_SPKOUT
tristate "Speak Out synthesizer support"
- ---help---
+ help
This is the Speakup driver for the Speakout synthesizer.
You can say y to build it into the kernel, or m to
@@ -178,7 +178,7 @@ config SPEAKUP_SYNTH_SPKOUT
config SPEAKUP_SYNTH_TXPRT
tristate "Transport synthesizer support"
- ---help---
+ help
This is the Speakup driver for the Transport
synthesizer. You can say y to build it into the kernel,
@@ -187,7 +187,7 @@ config SPEAKUP_SYNTH_TXPRT
config SPEAKUP_SYNTH_DUMMY
tristate "Dummy synthesizer driver (for testing)"
- ---help---
+ help
This is a dummy Speakup driver for plugging a mere serial
terminal. This is handy if you want to test speakup but
--
2.17.1
next reply other threads:[~2018-12-24 10:13 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-24 10:12 Daniel Smith [this message]
2018-12-24 13:07 ` [PATCH] staging: speakup: Fix coding style Samuel Thibault
-- strict thread matches above, loose matches on Subject: below --
2018-05-13 9:38 Samuel Thibault
2018-05-13 21:49 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181224101118.GA21642@dan-VirtualBox \
--to=daniel.bazinga@gmail.com \
--cc=chris@the-brannons.com \
--cc=gregkh@linuxfoundation.org \
--cc=kirk@reisers.ca \
--cc=linux-kernel@vger.kernel.org \
--cc=samuel.thibault@ens-lyon.org \
--cc=speakup@linux-speakup.org \
--cc=w.d.hubbs@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.