From: Eric Biggers <ebiggers@kernel.org>
To: linux-crypto@vger.kernel.org, Herbert Xu <herbert@gondor.apana.org.au>
Subject: [PATCH 2/3] crypto: skcipher - set CRYPTO_TFM_NEED_KEY if ->setkey() fails
Date: Sun, 6 Jan 2019 18:47:43 -0800 [thread overview]
Message-ID: <20190107024744.4952-3-ebiggers@kernel.org> (raw)
In-Reply-To: <20190107024744.4952-1-ebiggers@kernel.org>
From: Eric Biggers <ebiggers@google.com>
Some algorithms have a ->setkey() method that is not atomic, in the
sense that setting a key can fail after changes were already made to the
tfm context. In this case, if a key was already set the tfm can end up
in a state that corresponds to neither the old key nor the new key.
For example, in lrw.c, if gf128mul_init_64k_bbe() fails due to lack of
memory, then priv::table will be left NULL. After that, encryption with
that tfm will cause a NULL pointer dereference.
It's not feasible to make all ->setkey() methods atomic, especially ones
that have to key multiple sub-tfms. Therefore, make the crypto API set
CRYPTO_TFM_NEED_KEY if ->setkey() fails and the algorithm requires a
key, to prevent the tfm from being used until a new key is set.
[Cc stable mainly because when introducing the NEED_KEY flag I changed
AF_ALG to rely on it; and unlike in-kernel crypto API users, AF_ALG
previously didn't have this problem. So these "incompletely keyed"
states became theoretically accessible via AF_ALG -- though, the
opportunities for causing real mischief seem pretty limited.]
Fixes: f8d33fac8480 ("crypto: skcipher - prevent using skciphers without setting key")
Cc: <stable@vger.kernel.org> # v4.16+
Signed-off-by: Eric Biggers <ebiggers@google.com>
---
crypto/skcipher.c | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)
diff --git a/crypto/skcipher.c b/crypto/skcipher.c
index 2a969296bc248..de09ff60991e2 100644
--- a/crypto/skcipher.c
+++ b/crypto/skcipher.c
@@ -585,6 +585,12 @@ static unsigned int crypto_skcipher_extsize(struct crypto_alg *alg)
return crypto_alg_extsize(alg);
}
+static void skcipher_set_needkey(struct crypto_skcipher *tfm)
+{
+ if (tfm->keysize)
+ crypto_skcipher_set_flags(tfm, CRYPTO_TFM_NEED_KEY);
+}
+
static int skcipher_setkey_blkcipher(struct crypto_skcipher *tfm,
const u8 *key, unsigned int keylen)
{
@@ -598,8 +604,10 @@ static int skcipher_setkey_blkcipher(struct crypto_skcipher *tfm,
err = crypto_blkcipher_setkey(blkcipher, key, keylen);
crypto_skcipher_set_flags(tfm, crypto_blkcipher_get_flags(blkcipher) &
CRYPTO_TFM_RES_MASK);
- if (err)
+ if (unlikely(err)) {
+ skcipher_set_needkey(tfm);
return err;
+ }
crypto_skcipher_clear_flags(tfm, CRYPTO_TFM_NEED_KEY);
return 0;
@@ -677,8 +685,7 @@ static int crypto_init_skcipher_ops_blkcipher(struct crypto_tfm *tfm)
skcipher->ivsize = crypto_blkcipher_ivsize(blkcipher);
skcipher->keysize = calg->cra_blkcipher.max_keysize;
- if (skcipher->keysize)
- crypto_skcipher_set_flags(skcipher, CRYPTO_TFM_NEED_KEY);
+ skcipher_set_needkey(skcipher);
return 0;
}
@@ -698,8 +705,10 @@ static int skcipher_setkey_ablkcipher(struct crypto_skcipher *tfm,
crypto_skcipher_set_flags(tfm,
crypto_ablkcipher_get_flags(ablkcipher) &
CRYPTO_TFM_RES_MASK);
- if (err)
+ if (unlikely(err)) {
+ skcipher_set_needkey(tfm);
return err;
+ }
crypto_skcipher_clear_flags(tfm, CRYPTO_TFM_NEED_KEY);
return 0;
@@ -776,8 +785,7 @@ static int crypto_init_skcipher_ops_ablkcipher(struct crypto_tfm *tfm)
sizeof(struct ablkcipher_request);
skcipher->keysize = calg->cra_ablkcipher.max_keysize;
- if (skcipher->keysize)
- crypto_skcipher_set_flags(skcipher, CRYPTO_TFM_NEED_KEY);
+ skcipher_set_needkey(skcipher);
return 0;
}
@@ -820,8 +828,10 @@ static int skcipher_setkey(struct crypto_skcipher *tfm, const u8 *key,
else
err = cipher->setkey(tfm, key, keylen);
- if (err)
+ if (unlikely(err)) {
+ skcipher_set_needkey(tfm);
return err;
+ }
crypto_skcipher_clear_flags(tfm, CRYPTO_TFM_NEED_KEY);
return 0;
@@ -852,8 +862,7 @@ static int crypto_skcipher_init_tfm(struct crypto_tfm *tfm)
skcipher->ivsize = alg->ivsize;
skcipher->keysize = alg->max_keysize;
- if (skcipher->keysize)
- crypto_skcipher_set_flags(skcipher, CRYPTO_TFM_NEED_KEY);
+ skcipher_set_needkey(skcipher);
if (alg->exit)
skcipher->base.exit = crypto_skcipher_exit_tfm;
--
2.20.1
next prev parent reply other threads:[~2019-01-07 2:49 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-07 2:47 [PATCH 0/3] crypto: set CRYPTO_TFM_NEED_KEY if ->setkey() fails Eric Biggers
2019-01-07 2:47 ` [PATCH 1/3] crypto: hash - " Eric Biggers
2019-01-07 2:47 ` Eric Biggers [this message]
2019-01-07 2:47 ` [PATCH 3/3] crypto: aead " Eric Biggers
2019-01-18 10:55 ` [PATCH 0/3] crypto: " Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190107024744.4952-3-ebiggers@kernel.org \
--to=ebiggers@kernel.org \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.